Elro AS80MA11 Handleiding
Elro
Beveiliging
AS80MA11
Bekijk gratis de handleiding van Elro AS80MA11 (4 pagina’s), behorend tot de categorie Beveiliging. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.7 sterren uit 8.5 reviews. Heb je een vraag over Elro AS80MA11 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
1
Installation Instructions
General Introduction
The Magnetic Detector is used in security or home automation applications to detect
opening or closing of doors/windows. It consists of two parts; a Detector and a
Magnet. Opening the protected door/window will remove the magnetic field, sending
an alarm signal to the gateway.
Product Overview
4.
Select “Magnetic Detector”.
LED
Tamper
switch
Detector Magnet
Battery
Screw
mounting
hole
Battery Mylar
(for models with
battery included)
5.
The following screen will appear. This means the gateway is entering binding
mode.
Binding with Homesys
1.
Models with battery included: The battery is isolated by a mylar film to deactivate
the detector during shipment. Do not remove the mylar film yet.
Models without battery included: Do not insert the battery yet.
2.
Log into th eELRO Smart Home Alarm account from a web browser.
3.
Select “System”, then “Add a Device”.
6.
Models with battery included: Pull out the mylar film, the LED should turn ON.
AS80MA11
Magnetic Detector
2
Models without battery included: Open the battery cover and insert the battery.
7.
The screen below will appear within 10 seconds if the process is successful.
8.
Time-out will occur if the binding process was unsuccessful. Please refer to the
Troubleshooting section.
Manual Binding
1.
Remove the battery cover of the detector leaving the battery inside the detector.
2.
Repeat steps 4 to 5 of the Binding with ELRO Smart Home Alarm section.
3.
Locate the Tamper switch as shown below.
Tamper switch
4.
Press and hold the Tamper switch for about 4 seconds and release. The LED
will start to blink repeatedly. This implies detector has now entered the binding
mode and is waiting to receive binding signals from the gateway.
5.
Within 5 seconds, the LED indicator will then stop flashing and turn off,
indicating the learning procedure is completed. The screen below will appear
indicating the process is successful.
Product specificaties
| Merk: | Elro |
| Categorie: | Beveiliging |
| Model: | AS80MA11 |
Heb je hulp nodig?
Als je hulp nodig hebt met Elro AS80MA11 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beveiliging Elro
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
2 Februari 2023
Handleiding Beveiliging
- Easymaxx
- SecuFirst
- Electronics Line
- Smartwares
- Entrya
- Golmar
- Home Protector
- Trebs
- I-Tel
- AVTech - Velleman
- Doro
- Powerfix
- Alhua - Dahua
- Directed Electronics
- Kocom
Nieuwste handleidingen voor Beveiliging
6 Maart 2024
4 Februari 2024
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023
16 Oktober 2023