Eliminator Lighting Stealth Beam Handleiding


Pagina's 6 Engels Niet gecategoriseerd

Bekijk de handleiding van Eliminator Lighting Stealth Beam gratis online of download de PDF. 59 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

STEALTH BEAM
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Introduction:
The Stealth Beam is a DMX intelligent moving head unit. The Stealth Beam has 3 operating modes;
sound active mode, show mode, or controlled via DMX controller. The Stealth Beam has 2 DMX
Channel modes; 5 or 17 channels. The unit can be run as a stand alone unit or in a Master/Slave set
up. This unit has been tested and there is no assembly required. Follow the instructions on the
following pages to operate your fixture. To enhance the beams effects you can use a fog machine.
CAUTION! Please read and understand these instructions before installing or operating this unit.
SPECIFICATIONS:
Model: Stealth Beam
Supply Voltage: 100V-240V 50/60Hz
LED: 1 x 60W RGBW 4-in-1 LED
Weight: 8.5lbs./ 3.8 kgs.
Size: 5.75” (L) x 9.4” (W) x 11.22” (H)
Fuse: 2 Amp
Power Consumption:75W
Working Position: Any Safe position
Duty Cycle: None
DMX Channels: 2 DMX Channel Modes:
5 Channel Mode &
17 Channel Mode
Colors: RGBW
Warranty: 1 Year
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Fuse Replacement:Locate and remove
the unit’s power cord. Once the cord
has been removed, the fuse holder is
located inside the power socket. Insert
a flat-head screw driver into the fuse
holder and gently pry out the holder.
Remove the bad fuse and replace with
a new one. The fuse holder has a built-in
second holder for a spare fuse.

Beoordeel deze handleiding


Product specificaties

Merk: Eliminator Lighting
Categorie: Niet gecategoriseerd
Model: Stealth Beam

Heb je hulp nodig?

Als je hulp nodig hebt met Eliminator Lighting Stealth Beam stel dan hieronder een vraag en andere gebruikers zullen je antwoorden