Eliminator Lighting Electro 64 BLED Handleiding

Bekijk gratis de handleiding van Eliminator Lighting Electro 64 BLED (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over Eliminator Lighting Electro 64 BLED of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Electro 64 BLED

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

This unit 4 channel DMX intelligent LED par can. The Electro 64 BLED has 6 operating modes; sound active

mode, auto mode, color mode, color change mode, color fade mode, or DMX control mode. The unit can be

run as a stand alone unit or in a Master/Slave configuration. This unit has been tested and there is no assem-

bly required. The unit is ready to be plugged in to a power outlet. To enhance the beams effects you can use a

fog machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Electro 64 BLED

LED: 36 x 1W LEDs (12 Red,

12 Green, & 12 Blue)

Weight: 19lbs./ 3.6kgs.

Size: 12” (H) x 10.5” (W) x

10” (L)

Beam Angle: 30 Degrees

Fuse: 1 Amp

Supply Voltage: 110V/230V 50/60Hz

Power Consumption: 40W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4 DMX Channels

Warranty: 1 Year

CAUTION! Please read and understand these

instructions before installing or operating this unit.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: motors, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Fuse Replacement: Locate and remove the

unit’s power cord. Using a phillips-head screw

driver unscrew and remove the . Remove the bad

fuse and replace with a new one. The fuse holder

has a built-in socket for a spare fuse be sure not

to confuse the spare fuse with active fuse.

DMX TRAITS: 4 CHANNELS

CHANNEL 1: COLORS

0 - 255 = RED 0%-100%

CHANNEL 2: COLORS

0 - 255 = GREEN 0%-100%

CHANNEL 3: COLORS

0 - 255 = BLUE 0%-100%

CHANNEL 4: DIMMER/STROBE

0 - 189 = DIMMER 0% - 100%

190 - 250 = STROBE SLOW - FAST

251 - 255 = NO FUNCTION

Product specificaties