Eliminator Lighting E 103 Handleiding

Bekijk gratis de handleiding van Eliminator Lighting E 103 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over Eliminator Lighting E 103 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com

E 103

SPECIFICATIONS:

Model:

E 103

Weight:

5 lbs.

Size:

4.5”H x 4.5”W x 8.5”L

Lamp

: ZB-64610 12V 50W

Fuse:

1A

Supply Voltage:

120V

Working Position:

Any Safe position

Colors:

Multiple Colored Dish

Duty Cycle:

15min on/off

Warranty:

1 Year Limited Warranty

CAUTION!

Please read and

understand these instructions

before installing or operating

this unit.

Lamp Replacement:

Remove the two

thumb screws from the front of the unit.

Gently pull the front lens assembly forward

to access the lamp. Remove and replace

the bad lamp and reassemble in reverse

order.

HALOGEN LAMP WARNING!

This fixture is fitted with halogen

lamps which are highly susceptible

to damage if improperly handled.

Never touch lamp with bare fingers

as the oil from your hands will short-

en lamp life. Also, never move fixture

until lamp has had ample time to

cool. Remember, lamps are not cov-

ered under warranty conditions.

Caution!

Never open unit when in use.

Always disconnect main power before

serving or replacing lamp. Remember to

always replace with the exact same type

lamp and fuse.

Operating Instructions:

The unit is ready to be hung

or set on flat surface.

This fixture is designed to oper-

ate as a stand alone unit. It has been tested and the

lamp has been installed at the factory there is no

assembly necessary.

The E103 has three different

operating modes. For best results, we suggest using

fog or special effects smoke when using this unit.

This will enhance the effect allowing you to see the

beams of light.

This unit comes with a 3-way

multi-

operating switch

located on the

rear

of the unit.

The switch controls

three (3) different operating modes; Static, Sound

Active, and Continuous Rotation. When the switch

is in the "I" position

the internal dichroic dish spin

continuously and

the

barrel mirror

will react to

sound,

via its internal microphone. When the unit is in the

"0" position

the internal dichroic dish is static (does

not rotate) and

the

barrel mirror

will react to

sound

.

When the switch is in the "II" position the unit's

inter-

nal dichroic

color wheel

and barrel mirror

will

react to

sound.

Product specificaties