Electro Harmonix Worm Modulation Multi FX Handleiding
Electro Harmonix
Niet gecategoriseerd
Worm Modulation Multi FX
Bekijk gratis de handleiding van Electro Harmonix Worm Modulation Multi FX (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 245 mensen en kreeg gemiddeld 4.9 sterren uit 123 reviews. Heb je een vraag over Electro Harmonix Worm Modulation Multi FX of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1

The Worm
Analog Modulation Pedal
Congratulations on your purchase of
The Worm
, a multi-functional modulation pedal.
The Worm
is four analog effects in one: Modulated Wah, Phaser, Tremolo and Vibrato.
-AC ADAPTOR-
Your
Worm
comes equipped with a 24 volt DC (inner positive) / 100mA external power
adapter. Use only the power adapter that is supplied! Using the wrong adapter can cause
serious bodily injury and may damage your unit. This will void the warranty.
- CONTROLS -
MODE Rotary Switch
– Selects between the four different types of effects:
WAH
,
PHASER
,
TREMOLO
and
VIBRATO
.
RANGE Knob
– Adjusts the amount of effect that will be applied to your signal. As
the
RANGE
knob is turned from the Counter-Clockwise (minimum) position to the
Clockwise (maximum) position, the intensity of the effect will increase.
RATE Knob
– Adjusts the speed of modulation for the effect. As the
RATE
knob is
turned from the Counter-Clockwise (minimum) position to the Clockwise (maximum)
position, the speed of the effect will go from slow to fast.
AUTO / MANUAL/EXP Toggle Switch
– Set this switch to AUTO mode for normal
modulation use. When this switch is set to MANUAL/EXP mode, the internal
modulation waveform is disconnected from the circuit and the RANGE knob will
sweep through the effect. In addition, while in MANUAL/EXP mode, you can connect
an expression pedal or control voltage (between 0 – 5V only) to the EXP. PEDAL jack
and use the expression pedal to sweep the effects.
STATUS LED and FOOTSWITCH
– If the effect is engaged, the LED will blink at
the same rate that the effect modulates. If the LED is off, The Worm is in True
Bypass mode. The footswitch engages/disengages the effect.
- JACKS -
INPUT Jack
– Connect your instrument to this jack. The input impedance present at
this jack is 300 k
Ω
.
OUTPUT Jack
– Connect this jack to your amp or next effects pedal. The output
impedance present at this jack is 1 k
Ω
.
EXP. PEDAL Jack
– Connect an Expression Pedal to this jack or the output from a
Control Voltage generator. The expression pedal must have a TRS plug attached to it
with the tip attached to the pedal’s wiper. The control voltage must be between 0V
and 5V. The input impedance present at this jack is 100 k
Ω
.
Acceptable expression pedals include: M-Audio EX-P, Moog Expression Pedal, Roland
EV-5 and Boss FV-500L.
24V PWR Jack
– Connect the output plug from the supplied 24VDC/100mA wall
wart to the 24V PWR jack at the top of The Worm. Please use only the AC Adapter
that came supplied with The Worm. The Worm does not accept batteries.
Product specificaties
Merk: | Electro Harmonix |
Categorie: | Niet gecategoriseerd |
Model: | Worm Modulation Multi FX |
Heb je hulp nodig?
Als je hulp nodig hebt met Electro Harmonix Worm Modulation Multi FX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Electro Harmonix
15 Mei 2025
2 April 2025
1 April 2025
4 December 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
12 November 2024
9 Juli 2024
Handleiding Niet gecategoriseerd
- EXSYS
- EtiamPro
- DataComm
- Nero
- Morris
- Ecler
- Fusion
- Maze
- Jabsco
- SoundTube
- Stelzner
- Saris
- Wampler
- Overtone Labs
- Carson
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025