Electro Harmonix Microsynth Handleiding

Electro Harmonix Niet gecategoriseerd Microsynth

Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Microsynth (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

MICRO SYNTHESIZER

INSTRUCTIONS

- WARRANTY INFORMATION -

Please complete and return the enclosed warranty card within 10 days of

purchase. We will repair the unit for free within one year of date of purchase.

If you should need to return your unit for service within the warranty period,

please include a brief description of the problem as well as you name,

address, telephone number, copy of your receipt, and a check or money order

for $5.00 shipping and handling to:

Electro-Harmonix

C/O New Sensor Corporation

32-33 47th Avenue

Long Island City, NY 11101

Att: Service Department

Please make checks/money orders payable to New Sensor Corporation.

To hear demos by rock stars on all EH pedals visit us on the web at

www.ehx.com. Email us at info@ehx. om c

— OPERATING INSTRUCTIONS —

Congratulations on your purchase of the Electro-Harmonix Micro Synthesizer! You have purchased a

very powerful tool for musical expression. Please take a few minutes to familiarize yourself with the

Micro Synthesizer’s controls and how they work.

The Micr Synthesizer o can create many of the most popular analog lead synthesizer voicings at a

fraction of the normal cost for such capabilities. Its four voices: GUITAR, OCTAVE, SUB-OCTAVE, and

SQUARE WAVE are completely independent and fully mixable. The MICRO SYNTHESIZER can modify

these signals with envelope control for a variety of “bowed” or “blown” sounds. In addition, a

sophisticated swept filter control allows highly variable frequency adjustments to be made to the

signal. When combined, these controls offer the user a creative capability that is virtually limitless.

POWER ADAPTOR: Your unit comes equipped with a 24 volt/100 mA tip-positive, external power

supply (European models come equipped with a 24V DC/30 mA tip positive adaptor). USE ONLY THE

POWER ADAPTOR SUPPLIED. Using the wrong adaptor can cause serious bodily injury. Using the

wrong adaptor may also damage your unit and will void your warranty.

PREAMP GAIN ADJUSTMENT: The preamp gain in the Micro Synthesizer has been set at the factory

for use with a guitar equipped with single-coil pickups. If you will be using another instrument with

higher or lower output, it may be necessary to readjust this setting. For this purpose, an access port

has been provided in the upper right hand corner of the case bottom. A screwdriver or alignment

tool with a tip width o no morf e than 1/16" is required. Plug the AC power adaptor (supplied) into the

MICRO SYNTHESIZER and then into a power outlet. Make sure the power switch on the unit is in

the “on” position. Set the GUITAR slider control to 10, the STOP FREQ slider control to 5, and all

other controls to minimum. Insert the screwdriver through the access port until it seats firmly in the

trim control inside the unit Play your instrument with hard strokes. If the output signal distorts,.

turn the trim control counterclockwise until the distortion stops. If there is no distortion, tune the

trim control clockwise until distortion occurs, and then back off slightly. This adjustment can be

made in effect or bypass mode.

OPERATION: The Micro Synthesizer’s controls operate as described below. In all cases,

high-numbered control settings increase the level of the given effect.

FOOTSWITCH – Selects either the effect signal or the unaltered guitar signal.

This unaltered signal may be boosted slightly depending on the gain trim

control adjustment described above.

TRIGGER – Determines the input volume at which the filter circuits will

“turn on”. It does not affect any other circuitry. If the TRIGGER is set too high,

the filter may “stutter” due to multiple triggering. This is especially true if

full chords are played. It is best to set the TRIGGER at exactly the sensitivity

needed for your playing. This allows the further possibility of playing

synthesizer-type leads with filtering against softer, unfiltered chords.

The next five controls of the Micro Synthesizer comprise the VOICE MIXING section: GUITAR,

SUB-OCTAVE (one octave below), OCTAVE (one octave above), SQUARE WAVE, and ATTACK DELAY. Each

voice is completely independent and can be mixed with the others in any degree. Please note the

following voice characteristics:

GUITAR – This is the dry instrument input signal.

SUB OCTAVE – Only tracks single notes.

OCTAVE – Only tracks single notes. This voice contains a small amount of

harmonic distortion for added richness of tone.

SQUARE WAVE – Intensity of this voice is also determined by instrument

attack or volume. In all other respects it operates in a similar fashion to

a standard distortion device.

ATTACK DELAY – Determines the time required for the voice signals to reach

full volume. Higher-numbered settings can completely remove the initial attack

o the instrument. Different delay times contribute greatly to the characteristic f

sounds of various instruments. It is recommended that you synchronize your

playing t the speed setting of the ATTACK DELAY.o

The final five controls comprise the FILTER SWEEP section.

RESONANCE – Affects the degree of sharpness, or “Q” of the filter. Higher

settings cover a greater frequency range and also add a slight boost to the signal.

START FREQUENCY – Determines the frequency at which the filter sweep begins.

STOP FREQUENCY – Determines the frequency at which the filter sweep ends.

This is also the “resting frequency” of the filter, and if START and STOP controls

are set at the same level no sweep will occur, but the filter will provide emphasis

of that particular frequency band. In addition to lead synthesizer sounds,

START and STOP controls can be used to simulate attack, decay, and harmonic

content of acoustic instruments.

RATE – Determines the speed at which the filter sweeps from START FREQUENCY

t STOP FREQUENCY. It is recommended that RATE be synchronized with your o

playing speed.

SOUND TEMPLATES – The sample settings included with these instructions will help you

get familiar with your MICRO SYNTHESIZER and its controls. Once you‘ve tried all the

sample settings, feel free to experiment and develop your own unique palette of sounds.

You can record your new settings in the blank templates provided.

Product specificaties

Merk:	Electro Harmonix
Categorie:	Niet gecategoriseerd
Model:	Microsynth

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Microsynth stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Electro Harmonix

Electro Harmonix Germanium OD Handleiding

25 April 2024

Electro Harmonix 2X12 Speaker Cabinet Handleiding

15 Maart 2024

Electro Harmonix Rerun Handleiding

12 Maart 2024

Electro Harmonix 15Watt Handleiding

9 Januari 2024

Electro Harmonix Hum Debugger Handleiding

7 December 2023

Electro Harmonix Deluxe Memory Man 1100-TT Handleiding

16 November 2023

Electro Harmonix Triboro Bridge Handleiding

9 November 2023

Electro Harmonix Deep Freeze Handleiding

9 November 2023

Electro Harmonix Oceans 3-Verb Handleiding

9 November 2023

Electro Harmonix Walking On The Moon Handleiding

30 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024