Electro Harmonix Switchblade+ Handleiding

Bekijk gratis de handleiding van Electro Harmonix Switchblade+ (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 43 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Electro Harmonix Switchblade+ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SWITCHBLADE+

Deluxe Channel Selector

Congratulations on your purchase of the Electro-Harmonix ! With a fully SWITCHBLADE+

passive audio path and active LED indication, the provides a simple and SWITCHBLADE+

versatile interface for routing your signal.

Controls – –

A/B Footswitch (LED) –Press this switch to route the input signal to either OUT A (Red

LED) or OUT B (Green LED).

A+B Footswitch (LED) –Press this switch to route the input signal to both OUT A and

OUT B. When A+B is engaged (Red LED), the A/B Footswitch has no effect on the signal

path.

– – I/O

INPUT –Connect the output of your instrument or another effects pedal to this jack.

TUNER –Connect this jack to the input of a tuner device or another effects pedal. This

jack is hardwired to the INPUT jack and provides a direct output regardless of the state of

the unit.

OUT A Connect this jack to the input of an amplifier or the input of another effects –

pedal. Depending on the state of the A/B and A+B controls, this jack will output either the

direct input signal or no signal. When the A/B LED is lit red or the A+B LED is lit up, OUT A

is selected.

OUT B Connect this jack to the input of an amplifier or the input of another effects –

pedal. Depending on the state of the A/B and A+B controls, this jack will output either the

direct input signal or no signal. When the A/B LED is lit green or the A+B LED is lit up, OUT

B is selected.

– Power -

The can be powered by a 9V battery or a 9VDC battery eliminator SWITCHBLADE+

capable of delivering at least 16mA. The optional 9V power supply from Electro-Harmonix

is 9.6DC-200BI (same as used by Boss® & Ibanez®) 9.6 Volts DC 200mA. The power

supply must have a barrel connector with center negative.

The SWITCHBLADE+ can also operate without power, since the audio path is fully

passive. With no power, however, the LED indication will not function.

When A+B is engaged, the input impedance at the INPUT jack is equal to 50kΩ in parallel

with the combined input impedances of the devices connected to the TUNER, OUT A, and

OUT B jacks. When A+B is not engaged, the input impedance at the INPUT jack is equal

to 100kΩ in parallel with the combined input impedances of the devices connect to the

TUNER jack and OUT A or OUT B.

Product specificaties