Electro Harmonix Bass Metaphors Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Electro Harmonix Bass Metaphors (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
BASS METAPHORS
Channel Strip and Over Drive for Bass Players
Congratulations on your purchase of the Electro-Harmonix XO Bass
Metaphors. The Bass Metaphors is a uniquely designed multi-effect unit that
combines a preamp, EQ and overdrive. All are laid out in a channel strip
configuration. Additionally, a compressor may be independently assigned through a
toggle switch. The Bass Metaphors was designed and voiced specifically for bass
players. The parallel arrangement of the effects allows for finely tuned control over
each element in order to give you a final tone that fits your style and needs.
The Preamp section is made up of a Dry channel, EQ channel and a Distortion
channel. Each channel has its own level control, appropriately labeled. The EQ
channel has further controls, which adjust Bass and Treble independently. The
Distortion channel is also footswitch accessible, allowing the user to preset a sound to
be cut in or out as needed. The Volume control functions as a master volume after
the effects.
In addition, a leveling compressor can be cut into the circuit before the output, to
add sustain, “punch” or to even out your performance. This is controlled by the
“Squash” setting of the toggle switch placed in the center of the case.
The output of the Bass Metaphor is balanced/unbalanced and conveniently accessed
by ¼” TRS jack and by a standard XLR on the side of the unit. Please note that using
a standard ¼” unbalanced plug will bypass the balanced output for BOTH
connectors.
Effect Engaged LED On when the effect is active and off when not used. –
Distortion Engaged LED The LED is on when the distortion is active and off –
when the distortion is not in use.
DRY Out The dry output knob allows you to vary the amount of the dry signal –
heard at the output.
EQ level– Is the adjustable level of how much equalization is inserted into the
channel strip. When the EQ is fully down (counterclockwise) there is no EQ in the
channel strip. As the knob is rotated clockwise the more the amount of the set treble
and bass knobs will be added. At the full clockwise position the full amount of
potential EQ is applied.
Treble – The treble knob controls the amount of the 2-pole treble filter that is added
to the signal. When turned fully counterclockwise, there is no added treble. As the
knob is advanced clockwise, a carefully selected treble frequency is applied whose
amount linearly rises to the end of the clockwise rotation.
Bass – The bass knob controls the amount of bass frequency that is added to the
signal. When turned fully counterclockwise, there is no added bass. As the knob is
advanced clockwise, a carefully selected bass frequency is applied whose amount
linearly rises to the end of the clockwise rotation. It is also a 2-pole filter.
Note: When Bass filter is combined with the Treble filter you have a 4-pole filter.
Scooped midranges to very subtle to overt sonic possibilities can be found. This is a
very colorful EQ.
Direct output- signal is connected directly to the input for access of the original
signal.
Distortion – Controls the amount of distortion that is introduced into the channel
strip.
Volume Controls the master volume of the output signal. –
¼” INPUT Input jack for your bass guitar or instrument. –
Direct Out Your signal is assigned to this pass through output providing you with a –
dry signal only.
¼” OUTPUT Balanced/unbalanced tip ring sleeve balanced ¼ inch output –
connector. This jack will accept both a balanced or unbalanced signal.
XLR OUTPUT 3-pin connector allowing a balanced signal to be sent to low –
impedance XLR input. IE to a recording console, live mix console or any high end
balanced processor.
WARNING: US96DC-200BI Use only the adapter that the Bass Metaphors comes
supplied with. Do not use any other AC adapters. Using other AC adapters with the
incorrect rating, even those made by Electro-Harmonix, could cause harm to the unit,
the adapter or you. The SMMH does not use batteries.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at info@ehx.com or +1- - -8300. USA and Canadian customers: please 718 937
obtain a (RA#) from EHX Customer Service before returning your product. Return Authorization Number
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
- FCC COMPLIANCE -
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. If the device is not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications and void the
user's authority to guarantee the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help .
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Bass Metaphors

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Bass Metaphors stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd