Electro Harmonix Q-Tron Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Q-Tron (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Q-TRON
Envelope Controlled Filter
-OPERATING INSTRUCTIONS-
Congratulations on your purchase of the
Q-Tron
envelope controlled lter! You have
purchased a very powerful tool for musical expression.
Please take a few minutes to familiarize yourself with the
Q-Tron’s
controls and how they
work.
Envelope controlled filters are a unique type of sound modier where the intensity of the
eect is controlled by the user’s playing dynamics.
The volume (also know as the envelope) of an incoming audio signal is used to control a
swept lter. As the volume increases or decreases so does the pitch of the lter.
-CONTROLS-
Drive Switch
(Up/Down) – Selects direction of filter sweep
Range Switch
(HI/Lo) – Emphasizes vowel-like sound in low position and overtones in high
position.
Gain Control
(0-11) – Functions as both a volume control and a lter sensitivity control in
boost mode. In Normal mode the Gain control acts as a lter sensitivity control and has no
eect on the unit’s output volume.
Boost Switch
(Normal/Boost) – Normal mode disengages internal pre-amp, Boost mode
activates it. Also determines function of Gain control (see above).
Peak Control
(0-11) – Determines frequency peak of lter. This control will create a more
dramatic eect when turned clockwise.
Mode Switch
(LP, BP, HP, MIX) – Determines what frequency range the filter will sweep in.
Emphasizes lows in Low Pass, midrange in Band Pass, treble in High Pass. Mix mode
combines BP with dry instrument signal.
Bypass Switch
(in/out) – Disengages eect.
Lastly, the
Q-Tron’s
eect can be controlled by the user’s playing dynamics. A strong attack
will yield a more dramatic eect, while softer playing will yield more subtle eects or none at
all.
-OPERATION-
Your unit comes equipped with a 24-volt/100mA tip positive, external power adapter
(European models come equipped with a 24v DC/30mA tip positive adapter). Use only the
power adapter supplied. Using the wrong adapter can cause serious bodily injury. Using the
wrong adapter may also damage your unit and will void the warranty.
Make sure all controls are set at minimum. Connect your instrument to the input jack and your
amplifier to the effect out jack. The unit’s power LED should be lit.
Set the Q-Tron’s controls to the following:
Drive Switch: Up
Range Switch: Low
Mode Switch: BP
Peak Control: Maximum
Boost Switch: Normal
Gain Control: See Below
Vary the Gain control until the Overload Indicator LED lights on most of the notes you play. If
no effect is noticeable, depress the Bypass switch to engage the eect. With this setting the
user should be able to approximate the sound of a conventional wah wah pedal. Experiment
with this setting to see how the
Q-Tron
reacts to playing dynamics.
Adjusting the Gain and Peak controls will vary the amount and intensity of the effect. For
tonal variations adjust the Range, Mode, and Drive controls.
To attain an eect similar to an original Mutron III, set the Q-Tron’s controls to the following:
Drive Switch: Down
Range Switch: Low
Mode Switch: BP
Peak Control: Maximum
Boost Switch: Boost
Gain Control: See Below
Vary the Gain control until the Overload Indicator LED lights on only the loudest notes you
play. Increasing the Gain will saturate the lter, yielding those famous, “chewy” Mutron-like
sounds. Adjusting the Peak control will vary the intensity of the effect. For tonal variations,
adjust the Range, Mode, and Drive controls.
-OPTIONS FOR USE-
Due to the
Q-Tron’s
extended frequency response, it can be used with a wide variety of
electronic instruments. Here are some setting tips for use with dierent instrument types:
Range Control
: Lo range is the best for rhythm guitar and bass. Hi range is best for lead
guitar, brass, and wind use. Both ranges work well with keyboards.
Mix Mode
: Works especially well with bass guitar (May require higher peak settings).
Drive Switch
: Down Drive works well with bass guitar. Up Drive is best with guitar and
keyboards.
The
Q-Tron
can also be used in conjunction with other effect pedals. Here are some
interesting combinations:
Q-Tron
and
Big Mu
distortion: Place the distortion after the
Q-Tron
in the signal chain.
The use of distortion will dramatically increase the intensity of the
Q-Tron’s
eect. You can
also place the Distortion before the
Q-tron,
but his combination tends to atten the dynamic
response range of the eect.
Q-Tron
into another
Q-Tron
: Try this with one unit in the Up Drive position and one in the
Down Drive position.
Q-Tron
and octave divider: Place the octave divider before the
Q-Tron
in the signal chain.
Make sure to use an octave divider which maintains the natural envelope of the signal. This
combination will yield sounds similar to an analog synthesizer.
As always, experiment to achieve your own unique sound. When used properly, the
Q-Tron
will provide a lifetime of playing pleasure!


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Q-Tron

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Q-Tron stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd