Electro Harmonix EDDY Handleiding

Electro Harmonix Niet gecategoriseerd EDDY

Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix EDDY (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 156 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

EDDY

Analog Vibrato & Chorus

Congratulations on your purchase of the Electro-Harmonix Eddy! The Eddy

uses an all analog signal path for classic, bucket-brigade based vibrato and

chorus tones. Vibrato is a modulated pitch effect, while chorus mixes in your

dry signal to create a lush doubling effect. The Eddy features a variety of

unique options to make these effects more expressive, such as envelope and

expression pedal control over the rate and depth of the modulation. Further

options such as LFO shape warping and a tone control expand the

possibilities of the Eddy, making it a versatile yet classic modulation pedal.

- EDDY QUICK SETUP-

Plug the 9VDC adapter into the jack on the top of the Eddy. The unit must

be powered to pass signal, even in bypass. Connect an instrument cable

from your instrument into the jack. Connect an instrument cable INPUT

between the jack and a suitable amplifier. Click the footswitch to OUTPUT

engage the Eddy. The right, white LED lights to indicate that the unit is

active. Start with all knobs at the center (12 o’clock) position. The top-left

VIBRATO/CHORUS switch determines which effect you are using. Use the

RATE DEPTH knob to speed up or slow down the effect. Use the knob to

increase or decrease the intensity of the effect. These are the most basic

controls for the Eddy, other controls and options are explained starting on

the next page of this manual.

WARNING: Your Eddy comes equipped with an Electro-Harmonix 9.6DC-

200 power supply. The Eddy requires 40mA at 9VDC with a center negative

plug. Use of the wrong adapter or a plug with the wrong polarity may

damage the device and void the warranty. Do not exceed 10.5VDC on the

power plug. Power supplies rated for less than 40mA will cause the Eddy to

act unreliably.

1-VIBRATO/CHORUS switch: this switch determines which effect you are

currently using.

2-VOL knob: this knob sets the output volume of the effect.

3-RATE knob: this knob sets the speed of the modulation. The rate can be

further controlled with your playing envelope and/or an expression pedal,

which is explained later in this manual (see numbers 8 and 9).

4-DEPTH knob: this knob sets the amount of modulation. The higher this

knob is, the more dramatic the effect is. The depth can be further controlled

with your playing envelope and/or an expression pedal, which is explained

later in this manual (see numbers 8 and 9).

5-TONE knob: this knob affects the tonality of the effect. Turn this

clockwise for more treble (a brighter sound), turn this knob counter-

clockwise for more bass (a darker sound).

6-SHAPE knob: this knob affects the LFO (low-frequency-oscillator) shape

of the modulation. With the knob at center, you have a symmetric sine

wave, the most standard sounding effect. As you turn the knob one

direction or the other, the LFO shape is warped to be less symmetric the

further you turn the knob.

7-ENV/EXP switch: this switch determines whether the envelope and/or

expression pedal is affecting the rate or depth of the effect.

8-ENV knob: this knob effects how your playing envelope, or dynamics

(how loud/soft you are playing) affects the modulation. With the knob at

center, your envelope has no effect. As you turn the knob above center,

harder playing will result in a faster rate or higher depth (depending on the

state of the ENV/EXP switch). The further the knob is turned up, the more

dramatic this effect will be. As you turn the knob below center, the opposite

happens: harder playing results in a slower rate or lesser depth.

When using the envelope to affect RATE or DEPTH, it is important to know

that the RATE and DEPTH knobs set the “base level” of that control, as in

where it is at when you aren’t playing or are playing softly. Then, playing

harder results in an increase or decrease (depending on which side of the

ENV knob you are on) from that level.

The envelope cannot drive the rate or depth much past the

maximum/minimum range of the RATE and DEPTH knobs. So for example, if

you have the RATE knob relatively high, the ENV/EXP switch set to RATE,

and the ENV knob relatively high, you won’t hear a strong envelope effect

because the RATE is already close to its maximum before taking into account

the envelope. However, if you have the RATE knob set to minimum and the

ENV knob set to maximum, you will hear a very dramatic effect.

9-EXP jack: plug an external expression pedal into this jack using a TRS

(tip-ring-sleeve) cable. The Eddy, like all Electro-Harmonix effects, sends out

its reference voltage on the ring and expects the control voltage on the tip.

Which parameter the expression pedal controls depends on the state of the

ENV/EXP switch. The current position of the RATE/DEPTH knob will serve as

the maximum level, the level you will get when the expression pedal is at

toe.

10-INPUT jack: plug a standard TS instrument cable from your guitar (or

the output of another effects pedal) into this jack. The input impedance of

the Eddy is 1MΩ.

11-OUTPUT jack: plug a standard TS instrument cable from this jack to the

input of a suitable amplifier or a different effects pedal. The output

impedance of the Eddy is 470Ω.

12-Footswitch: press this footswitch to switch between effect and

buffered-bypass modes. You can also use this footswitch to enable a

momentary effect. If, when in bypass, you press and hold the footswitch for

over a half second or so, upon pressing it the effect will engage, and upon

removing your foot the effect will switch back to bypass. You can disable

this momentary option by opening the back of the pedal and switching the

internal “mom. enable” switch on the bottom left to “OFF.”

13-White status LED: this LED lights when the pedal is in effect mode,

and is off when the pedal is in buffered-bypass mode.

14-Blue strobing LED: this LED strobes based on the current rate and

shape of the modulation. As the rate is changed, by either the RATE knob,

your envelope, or the expression pedal, you will see the speed of this LED’s

strobing change. This LED also helps visualize changes in the LFO shape

controlled by the SHAPE knob. The current depth of the modulation is not

reflected in this LED.

15-Power jack: plug the included power supply into this jack. The Eddy

requires a voltage around 9VDC, on a center-negative plug. The Eddy draws

around 40mA of current. Use of the wrong adapter or a plug with the wrong

polarity or voltage may damage your Eddy and void the warranty. The Eddy

does not accept a 9V battery.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or

complete and return the enclosed warranty card within 10 days of purchase.

Electro-Harmonix will repair or replace, at its discretion, a product that fails

to operate due to defects in materials or workmanship for a period of one

year from date of purchase. This applies only to original purchasers who

have bought their product from an authorized Electro-Harmonix retailer.

Repaired or replaced units will then be warranted for the unexpired portion

of the original warranty term.

If you should need to return your unit for service within the warranty period,

please contact the appropriate office listed below. Customers outside the

regions listed below, please contact EHX Customer Service for information on

warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian

customers: please obtain a (RA#) from Return Authorization Number

EHX Customer Service before returning your product. Include  with your

returned unit  a written description of the problem as well as your name,

address, telephone number, e-mail address, RA# and a copy of your receipt

clearly showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

47-50 33rd STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718-937-8300 Tel: +44 179 247 3258

Email: Email: electroharmonixuk@virginmedia.cominfo@ehx.com

To hear demos of all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

- FCC COMPLIANCE -

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. If the device is

not installed and used in accordance with the instructions, it may cause

harmful interference to radio communications and void the user's authority

to guarantee the equipment.

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help .

Modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment under FCC rules.

The CE logo indicates that this product has been tested and shown to conform with all

applicable European Conformity directives.

Product specificaties

Merk:	Electro Harmonix
Categorie:	Niet gecategoriseerd
Model:	EDDY

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix EDDY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Electro Harmonix

Electro Harmonix Germanium OD Handleiding

25 April 2024

Electro Harmonix 2X12 Speaker Cabinet Handleiding

15 Maart 2024

Electro Harmonix Rerun Handleiding

12 Maart 2024

Electro Harmonix 15Watt Handleiding

9 Januari 2024

Electro Harmonix Hum Debugger Handleiding

7 December 2023

Electro Harmonix Deluxe Memory Man 1100-TT Handleiding

16 November 2023

Electro Harmonix Triboro Bridge Handleiding

9 November 2023

Electro Harmonix Deep Freeze Handleiding

9 November 2023

Electro Harmonix Oceans 3-Verb Handleiding

9 November 2023

Electro Harmonix Walking On The Moon Handleiding

30 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024