Edifier JoyBuds Handleiding

Bekijk gratis de handleiding van Edifier JoyBuds (6 pagina’s), behorend tot de categorie Oordopje. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Edifier JoyBuds of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Manual

JoyBuds

True Wireless Earbuds

Model: EDF280055

EN 1. Power ON/OFF

2. First pairing

3. Pairing for new device

7. Screen controls

8. Controls

6. Charging

4. Reset/left & right connection

Open or close the case to power on/o.

1. Once powered on, the earbuds will automatically enter Bluetooth

pairing mode. The screen will show: "Pairing..."

2. Select "EDIFIER JoyBuds" from your device list to connect.

1. Place the earbuds in the case and keep it open.

2. Press and hold the case button for 3 seconds. The screen will

show: "Pairing..." or re-pair via the re-pairing inteace on the

screen.

3. Select "EDIFIER JoyBuds" from your device list to connect.

Note: For subsequent use, the earbuds will automatically connect to

the device used last time.

5. Batte Status

1. Place the earbuds in the case and keep it open.

2. Press the case button three times to initiate the facto reset.

3. The screen will show: "Reset done. Pairing soon. If needed, reset

case via app."

4. After the reset, the screen will show "Pairing..."

Note: This operation will clear pairing records, reconnect left & right

earbuds and restore facto settings.

Press the case button to wake the screen and check the batte level.

Note: The case enters power-saving mode when the batte is below

5%. Only earbud on/o is available. Please charge promptly!

1. Press the case button once to wake the screen or turn it o.

2. Swipe up to unlock.

3. After unlocking, swipe left or right to switch between function

screens.

Note:

1. You can personalize the screen wallpaper and scrolling text via the

app.

2. Press and hold the case button for about 16 seconds to reset the

charging case, or reset it via the app.

Answer/End a Call: Double-press either earbud

Play/Pause: Double-press the left earbud

Take Photos: Double-press the right earbud

Next Track: Triple-press the right earbud

Previous Track: Triple-press the left earbud

Note: You can customize control settings via the EDIFIER ConneX

app.

Use the included USB-C cable to connect to a power source for

charging.

Input: 5 V 200 mA (Earbuds) 5 V 1 A (Charging Case)

Note: Make sure the earbuds and USB-C po are completely d

before charging.

EDIFIER JoyBuds

Bluetooth

Pairing

EDIFIER JoyBuds

Bluetooth

Pairing

3s

Pairing

x3

Low batte,

please charge

x1

x1

Product specificaties