Edifier Comfo Bass Handleiding

Bekijk gratis de handleiding van Edifier Comfo Bass (8 pagina’s), behorend tot de categorie Oordopje. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over Edifier Comfo Bass of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN 1. Power ON/OFF

2. First pairing

3. Pairing for new device

7. Charging

6. Controls

Manual

4. Reset/left & right connection

Open or close the case to power on/o.

1. Once powered on, the earbuds will automatically enter Bluetooth

pairing mode.

2. Select "EDIFIER Comfo Bass" from your device list to connect.

1. Disconnect from device A. The earbuds will auto-enter Bluetooth

pairing mode. Select "EDIFIER Comfo Bass" from device B settings

to connect.

2. Once powered on, the earbuds will automatically reconnect to the

last device used. If the connection fails within 10 seconds, the

earbuds will enter Bluetooth pairing mode.

Comfo Bass

True Wireless Earbuds

5. Multipoint connection

The left and right earbuds are connected by default. If the left and

right earbuds are disconnected, follow the steps below to re-pair:

1. Take out the earbuds.

2. Respectively tap the left and right earbuds 5 times in 12 seconds

to reset and enter TWS pairing, then the white LED will blink slowly.

3. After the reset and TWS connection are successful, the earbuds

will enter Bluetooth pairing mode. The white and orange LED will

blink rapidly and alternately.

1. Pair device A with the earbuds, then manually disconnect from

device A (do not select "Forget Device"). The earbuds will auto-enter

Bluetooth pairing mode.

2. Select "EDIFIER Comfo Bass" from device B settings to connect.

3. Select "EDIFIER Comfo Bass" from device A settings again to complete

the multipoint connection. When successful, the white LED will blink

twice eve 5 seconds.

Model: EDF200254

EDIFIER Comfo Bass

Bluetooth

A

EDIFIER Comfo Bass

Bluetooth

B

EDIFIER Comfo Bass

Bluetooth

x5x5

Answer/End a Call: Double-press either earbud

Play/Pause: Double-press either earbud

Next Track: Triple-press the right earbud

Previous Track: Triple-press the left earbud

Volume Up: Press and hold the right earbud

Volume Down: Press and hold the left earbud

Note: You can customize control settings via the EDIFIER ConneX

app.

L R

Use the included USB-C cable to connect to a power source for

charging.

Input: 5 V 200 mA (Earbuds) 5 V 1 A (Charging Case)

Note: Make sure the earbuds and USB-C po are completely d

before charging.

1s

1s

x5

≤5%

≤30%

＞30%

A

EDIFIER Comfo Bass

Bluetooth

A

EDIFIER Comfo Bass

Bluetooth

B

EDIFIER Comfo Bass

Bluetooth

Product specificaties