Draper D20 99250 Handleiding
Draper
Schroefmachine
D20 99250
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper D20 99250 (10 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 4 personen en werd door 2.5 gebruikers gemiddeld met 4.6 sterren beoordeeld
Pagina 1/10
20V BRUSHLESS
1/2" MID-TORQUE
IMPACT WRENCH
99250 & 99251 (EU 27888)
SANS CHARBON 20V
COUPLE MOYEN 1/2"
CLÉ À CHOCS
99250 & 99251 (EU 27888)
PISTOLA DE IMPACTO
SIN ESCOBILLAS DE 20V
PAR DE TORSIÓN MEDIO 1/2"
99250 & 99251 (EU 27888)
APARAFUSADORA DE IMPACTO
20V SEM ESCOVAS
DE APERTO MÉDIO DE 1/2"
99250 & 99251 (EU 27888)
BÜRSTENLOSER 20V 1/2"
FÜR MITTLERES DREHMOMENT
BOHRSCHRAUBER
99250 & 99251 (EU 27888)
20V BORSTELLOZE
1/2" MIDDENKOPPEL
SLAGMOERSLEUTEL
99250 & 99251 (EU 27888)
ORIGINAL LANGUAGE
1. INTRODUCTION
1.1 SCOPE
This product is intended to tighten and loosen
mechanical xings (nuts, bolts, etc) where high level
torque is required.
Part of our core range, this product is suitable for
enthusiasts and tradespersons alike.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Read the instruction manual.
Wear face mask and safety glasses.
Wear ear defenders.
Wear protective gloves.
Long hair must be tied back.
Do not abandon into the environment.
Keep out of the reach of children.
Warning!
Warning! Risk of crushing.
Direction of rotation.
Continuous A-Weighted Sound
Pressure Level.
Class II construction
(Double insulated).
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Lithium-ion product.
Do not incinerate or throw
onto re.
For indoor use only.
Do not expose to rain.
Fuse protective device.
Polarity indication.
Rated voltage.
UK Conformity Assessed.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock No’s. 99250 & 99251 (EU 27888) .........................
Part No’s. ..................... D20IW400/2 & D20IW400SET/2
Revolutions Per Minute (no load) 0 - 2,200rpm .................
Square Drive ............................................................. 1/2"
Max Fastening Torque .......................................... 400Nm
Impact rate ..................................................0 - 3,300bpm
Sound pressure level (LpA)*: 96dB(A) ...........................
Sound power level (LWA)**: 107dB(A) .............................
Vibration level: ................................................... 19.1m/s2
Weight (machine only):......................................... 1.55kg
Battery pack (for 99251, sold separately):
Part No. D20B4.0AH .............................................
Type ............................................................ Li-Ion
–
2
–
–
3
–
Rated Voltage .................................................20V
Rating .................................................... 2x 4.0Ah
Chargers (for 99251, sold separately):
Part No. D20BCS/2 ...............................................
Rated Voltage 230V~ .............................................
Rated Frequency ...........................................50Hz
Rated D.C. output voltage ............................. 20V
Rated D.C. output current .............................2.4A
Protective device rated current 8A..........................
Construction ............................................ Class II
3. HEALTH AND SAFETY
INFORMATION
3.1 GENERAL SAFETY
INSTRUCTIONS FOR POWER TOOL
USE
Warning! Read all safety warnings, instructions,
illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tools” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment Always
wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection
use for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your nger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
Product specificaties
| Merk: | Draper |
| Categorie: | Schroefmachine |
| Model: | D20 99250 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper D20 99250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Draper
25 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
Handleiding Schroefmachine
- Schroefmachine Powerplus
- Schroefmachine Goon
- Schroefmachine Silverline
- Schroefmachine TAURUS Titanium
- Schroefmachine Fein
- Schroefmachine Mafell
- Schroefmachine Dremel
- Schroefmachine Gedore
- Schroefmachine Porter-Cable
- Schroefmachine Toolland
- Schroefmachine Cotech
- Schroefmachine Matrix
- Schroefmachine Rodcraft
- Schroefmachine Weidmüller
- Schroefmachine Beta
Nieuwste handleidingen voor Schroefmachine
5 Juni 2025
31 Maart 2025
31 Maart 2025
31 Maart 2025
30 Maart 2025
29 Maart 2025
29 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025