Draper 78773 Handleiding

Bekijk gratis de handleiding van Draper 78773 (2 pagina’s), behorend tot de categorie Soldeermachine. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Draper 78773 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BLOW TORCH

78773

MICRO BUTANE

EN

Original Instructions

Version 2 – March 2023

1.Specication

2.HealthandSafetyWarnings

• Observe all standard safety precautions and good

practices when working with naked ames and

ammable fuels.

• Keep the work environment clear and well-lit, with

bystanders at a safe distance.

• Keep this product out of reach of children at all times.

• ALWAYS wear appropriate eye and face protection and

protective gloves when using this product.

• Check the torch for damaged, clogged or corroded parts

and leaks before every use.

 −DO NOT use the product if it is damaged or leaking

in any way; contact Draper Tools for repair and

replacement options.

 −If you suspect that the product is leaking gas, move

it to an external environment immediately.

Important: The product can be tested for leaks by

dabbing soapy water solution on joints and

connections while gas is added to or stored in the

product. Leaks will create a steady feed of soapy

bubbles at the breach point.

• Use ONLY in well-ventilated environments.

• DO NOT use this product in environments where paint

fumes, solvents and other ammable materials are

present.

• Use only good quality butane gas.

WARNING!Butanegasishighlyammable;handle

itcarefullyandinaccordancewiththe

instructions on the canister.

• During rst use, allow a few minutes for the product to

settle once ignited before directing it towards the

workpiece.

WARNING!Themetalpartsofthetorchbecome

veryhotduringuse.DONOTtouchthebarrelor

workpieceuntiltheyhavecooledthoroughly.

WARNING!Avoidcontactwithskin,clothingor

otherammablematerials.

• DO NOT leave the product running while unattended.

• DO NOT expose the product to temperatures above 49°C

(120°F) or to prolonged periods of sunlight.

• ALWAYS switch o the product while it is not in use and

ensure that the control lever remains in its lowest

position.

• After each use, ensure that the ame is fully

extinguished, the control lever is in its lowest position

and the product has completely cooled before storing.

• DO NOT attempt to disassemble or modify this tool in

any way.

• ALWAYS refuel outside.

• NEVER smoke while refuelling.

WARNING!Thisproductisnotinsulatedagainst

electricity.NEVERusethisproductonworkpieces

thatareconnectedtoelectricalpower.

3.Refuelling

WARNING!Beforellingtheproduct,ALWAYS

ensurethatthecontrolleverisinitslowest

position.ONLYusebutanegastofueltheproduct.

Important: This product is not shipped with butane gas

and MUST be fuelled before use.

1 Fig.

(A)

1. Turn the torch upside-down and push the butane

can nozzle rmly into the lling valve (A).

Stock No.78773

Part No.GT7

Fuel typeButane

Approx. temperatureUp to 13,00°C

Operating time (one gas

lling)

20 mins approx. at mid

setting

DimensionsW 90 × H 35 × Ø 20mm

Weight (80% gas ll)36g

Read this manual in full before using this product and

retain it for future use. Always use the latest version of the

manual. Please visit drapertools.com/manuals for the

latest version of this manual.

Product specificaties