Dormakaba 9800 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba 9800 (23 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
I9800-1 4/2010
SURFACE VERTICAL ROD EXIT DEVICE
9800/F9800 SERIES
INSTALLATION INSTRUCTIONS
1135-233 95057472 www.dorma-usa.com 1-800-523-8483
Index:
Screw chart
Tools required
Outside trim options
"03" Additional door prep
Device installation
Optional bottom strikes
Rod cutting
Rod extension
Popper details
5400 retro-t preparation
Options
Latch case templates
Chassis spotting template
1
2
3
4
5-12
13
14
14
14
15
16-17
18-21
22
Note: One set of instructions should be left
with building owner after device has been
installed.
1
SCREW CHART
(2) #12 x 1 1/4" F.H.P.T.S. (Wood Door)
(2) 12-24 x 1 1/2" F.H.P.M.S. (Metal or Thru Bolts)
(2) #12 x 1 1/4" R.H.P.T.S. (Wood Door)
(2) 12-24 x 1" R.H.P.M.S. (Metal or Thru Bolts)
(10) 8-32 x 1/4" F.H.P.M.S.
Chassis Mounting
End Cap Bracket
Chassis Cover,
End Cap & Latch
Covers
Chassis Mounting
End Cap Bracket
#439 Bottom Strike
(Cement or Grout
In Place)
(3) #12 x 1" R.H.P.T.S. (Wood Door)
(2) 12-24 x 1/2" R.H.P.M.S. (Metal or Thru Bolts) Latch To Door
Latch To Door
(3) #12 x 1" R.H.P.T.S. (Wood Door)
(2) 12-24 x 1/2" R.H.P.M.S. (Metal or Thru Bolts) Latch To Door
Latch To Door
(1) 12-24 x 3/4" F.H.P.M.S. (Metal or Thru Bolts) Latch To Door
(1) 12-24 x 3/4" F.H.P.M.S. (Metal or Thru Bolts) Latch To Door
(4) #8 x 1 1/2" F.H.P.T.S. Rod Guide Mounting
(2) #12 x 1" F.H.P.T.S. (Wood)
(2) 12-24 x 3/4" O.H.P.M.S. (Metal) #426 Strike Pack
(2) 8-32 x 1/2" R.H.P.M.S. Rod Retaining Clip Mount
#426 Strike Pack
2
RHR LHR
9800
Series
Device
9800
Series
Device
9800
Series
Device
9700
Series
Device
12-24 Tap, 10-32 Tap
Drill bits: 1/8", 3/8", #25, #16, #21
Hole saw 1 1/4" diameter for trim (if required) or jig saw.
5/32" Allen wrench for lever trim.
HANDING OF DOOR
HANDING OF DOOR
HANDING OF DOOR
HANDING OF DOORHANDING OF DOOR
TYPICAL APPLICATIONS
TYPICAL APPLICATIONS
TYPICAL APPLICATIONS
TYPICAL APPLICATIONSTYPICAL APPLICATIONS
SPECIAL TOOLS FOR INSTALLATION
SPECIAL TOOLS FOR INSTALLATION
SPECIAL TOOLS FOR INSTALLATION
SPECIAL TOOLS FOR INSTALLATIONSPECIAL TOOLS FOR INSTALLATION
Read the entire instruction sheet prior to installation.
Before Installing Hardware:
1. Verify door width, handing and product with carton label for correct exit device and length. (See Step 6)
2. For hand reversal of chassis see page 6, for outside lever trim see page (3).
3. For less bottom rod device, delete bottom latch installation steps.
Note: Less bottom rod device is not recommended where security is a primary concern.
Note: If device is to be installed over glass lite panels, shim kit may be required, order GK9200.


Product specificaties

Merk: Dormakaba
Categorie: Niet gecategoriseerd
Model: 9800

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba 9800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Dormakaba

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd