Doepfer A-155v Handleiding
Doepfer
Niet gecategoriseerd
A-155v
Bekijk gratis de handleiding van Doepfer A-155v (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 68 mensen en kreeg gemiddeld 4.7 sterren uit 34.5 reviews. Heb je een vraag over Doepfer A-155v of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/16
doepfer System A - 100 Analog / Trigger Sequencer A-155
1
1. Introduction
Module A-155 (Analog / Trigger Sequencer) is a com-
bined 8-step analog and trigger sequencer: it can
simultaneously produce sequences of analog voltages
and trigger and/or gate signals.
Module A-155 works very much like the Clock Sequen-
cer module, A-161, but includes many extra (and
expensive to implement!) functions.
The control section includes switches for Start, Stop,
Step and Reset - which can be operated by push-
button as well as digital signals. Above the top row,
eight LEDs show the progress of the sequence, with
each step’s LED lighting in turn.
The A-155 has two analog rows, each with eight
knobs, with which to set the control voltage for each
step. The upper row is particularly designed for pitch
control of a VCO, with a range switch giving the ability
to set pitches precisely.
The lower row of eight knobs has the ability to accept
an external signal for each step, in which case the
knobs act as attenuators for this voltage.
The variable voltages from the analog rows can either
be output direct, or can go through a sample-and-
hold section and a slew limiter (‘glide’). Using the
S&H and glide control inputs, it’s possible to select
‘hold’ (S&H) or portamento (glide) for whichever step
or steps you want.
Three rows of triggers and one row of gates are
available. For each step, a three-way mini-switch lets
you decide whether one or the other (or neither) of the
two triggers works. Each row has an LED which lights
whenever a trigger or gate is active at any particular
step.
A-155 Analog / Trigger Sequencer System A - 100 doepfer
2
2. Overview
0 10
0 10
1
0 10
0 10
2
0 10
0 10
3
0 10
0 10
4
0 10
0 10
5
0 10
0 10
6
0 10
0 10
7
0 10
0 10
8
0 10
0 10
0 10
Range Glide
Scale Glide
Trig 1
Trig 2
Trig 3
Gate
Trig.
Control
External CV / Audio Inputs
Trigger Outputs Control
Start
Stop
Step
Reset
Pre
Out
Pre
Out
S&H
Ctrl.
Post
Out
S&H
Ctrl.
Post
Out
Glide
Ctrl.
Glide
Ctrl.
1 V
4 V
2 V
A-155
Analog / Trigger Sequencer
➀
➁
➃
➄
➂ ➊ ➋ ➈
➌
➅ ➆ ➇
➎
➍
doepfer System A - 100 Analog / Trigger Sequencer A-155
3
Controls
1 Switches : these select triggers and/or gates for
each step
2 LEDs : indicators to show the step reached
3 Trig. Control: indicators for trigger and gate rows
4 CV knob: these set the control voltage output
for each step of the upper CV row
5 CV knob: these set the control voltage output
for each step of the lower CV row,
and/or act as attenuators for the ex-
ternal CV / audio inputs
6 Range : switch to select the voltage range of
the CVs put out by the upper CV row
7 Scale : range control for the lower CV row
8 Glide : control for the glide time (amount of
slew) on either upper or lower CV row
9 Control : manual controls
Start : start button
Stop : stop button
Step : button for manually stepping through a
sequence
Reset : reset button
In / Outputs
! Trigger Out : outputs for the three triggers and
one gate
" Control : digital control input sockets
Start : input for start signal
Stop : input for stop signal
Step : input for clock signal
Reset : input for reset signal
§ , :CV outputs control inputs
Pre Out : output for the upper or lower analo-
gue CV row
Post Out : as above, but after the sample-and-
hold and/or glide circuitry
S&H Ctrl. : control input for sample-and-hold
section
Glide Ctrl. : control input for the glide section
$ External CV/
Audio Inputs : inputs for controlling the voltage of
each step of the lower analog CV
row by a CV or audio signal
Product specificaties
| Merk: | Doepfer |
| Categorie: | Niet gecategoriseerd |
| Model: | A-155v |
Heb je hulp nodig?
Als je hulp nodig hebt met Doepfer A-155v stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Doepfer
31 Maart 2024
8 Juli 2023
6 Juli 2023
4 Juli 2023
3 Juli 2023
3 Juli 2023
2 Juli 2023
2 Juli 2023
30 Juni 2023
30 Juni 2023
Handleiding Niet gecategoriseerd
- Cube Controls
- Anywhere Cart
- Jonard Tools
- Z CAM
- Alfresco
- Uni-T
- Genexis
- SAUTVS
- CEEM
- Tormatic
- Ansco
- Jupiter
- Dedra
- Concept2
- Fresh N Rebel
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025