Doepfer A-135-2v Handleiding

Bekijk gratis de handleiding van Doepfer A-135-2v (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.5 sterren uit 8 reviews. Heb je een vraag over Doepfer A-135-2v of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DOEPFER MUSIKELEKTRONIK GMBH

DOEPFER MUSIKELEKTRONIK GMBH

DOEPFER MUSIKELEKTRONIK GMBH

DOEPFER MUSIKELEKTRONIK GMBH DOEPFER MUSIKELEKTRONIK GMBH

A-135-2 Quad VCA / Voltage Controlled Mixer

Position and function of the jumpers and connectors Board A

The pin headers JP4, JP5, JP6 and JP7 are used to determine the control voltages for the VCAs 2-4:

JP4: VCA2 control

jumper in upper position Æ VCA2 is controlled by CV2 (factory setting)

jumper in lower position Æ VCA2 is controlled by CV1 (in this case CV2 does not affect VCA2)

JP5: VCA3 control

jumper in upper position Æ VCA3 is controlled by CV3 (factory setting)

jumper in lower position Æ VCA3 is controlled by CV1 (in this case CV3 does not affect VCA3)

JP6: VCA4 control

jumper in upper position Æ VCA4 is controlled by CV4 (factory setting)

jumper in lower position Æ VCA4 is controlled by CV1 (in this case CV4 does not affect VCA3)

JP7: alternative VCA4 control

jumper installed Æ VCA4 is controlled by CV2 (used for "Stereo" mode)

In this case the jumper on JP6 has to be removed !

JP4: VCA2 control

Bus connector

(colored stripe left)

JP5: VCA3 control

JP6: VCA4 control

JP7: alternative

VCA4 control

Product specificaties