Digitus DS-55100-1 Handleiding
Digitus
AV extender
DS-55100-1
Bekijk gratis de handleiding van Digitus DS-55100-1 (8 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 37 mensen en kreeg gemiddeld 4.5 sterren uit 19 reviews. Heb je een vraag over Digitus DS-55100-1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

HDMI EXTENDER SET, FULL HD
Manual
DS-55100-1
The Digitus HDMI Extender Set, Full HD offers an extender solution of up
to 50 m for the highest demands. It is used to transmit digital video and
audio signals to a maximum length of up to 50 m. The highest supported
video resolution is 1080p / 60Hz. The transmitter unit features an EDID
switch, which can be used to regulate resolution and audio format of the
output signal. The transmitter also has an HDMI Loop Out Port, which
allows you to connect a local monitor. Thanks to PoC (Power over Cable)
support, it is only the transmitter unit that needs to be powered. The
package includes two bidirectional infrared units (transmitter, receiver),
which can be used for the remote control of the connected input source.

Important Safety Notice
Please read below safety instructions carefully before installation and
operation:
1. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR
blaster extension cable and IR receiver extension cable before
installation.
2. Do not hot plug when it is working.
3. Use DC5V power supply only. Make sure specification matched if
using adapters not supplied by factory.
4. This HDMI Extender supports POE to power the receiver (Connect
power supply to the transmitter only and receiver is powered by the
Transmitter). Please note that this HDMI Extender cannot use with
switch or router.
Product Features
1. Include a transmitter unit (TX) and a receiver unit (RX), working
as a pair.
2. Support resolution is up to full HD 1080p@60Hz.
3. Use CAT6/6A/7 for long distance transmission.
4. Transmission distance up to 50 meters via CAT6 cable.
5. Uncompressed and zero latency.
6. With EDID switch for setting a very needed HDMI signal format
7. Support POE to power the receiver from transmitter.
8. Support IR pass-back for remote control source device from
receiver site easily.
9. Plug and play, without installation.
Package Contents
Transmitter unit
(Tx) × 1pcs
Receiver unit
(Rx) ×1pcs
User manual×1pcs
IR blaster extension
cable ×1pcs
IR receiver extension
cable×1pcs
Power supply×1pcs

Specification
Part No. DS-55100-1
Technical Receiver-RX Transmitter-TX
HDCP compliance 1.2a
Video bandwidth 225MHz (10.2Gbps)
Video support 480I/P, 576I/P, 720P, 1080I/P, 3D
Audio support PCM, AC3, DTS
Input TMDS signal 1.2Vp-p
Input DDC signal 5V
ESD protection 8KV
EDID support yes
loop-out on TX one HDMI loop-out on TX
POE support RX powered by TX
IR pass-back yes
IR frequence
Range (KHz) 20-60KHz
Mechanical Transmitter-TX Receiver-RX
Housing Metal enclosure
Dimensions 71.6 x 66.9 x 22.6mm 71.6×66.9×22.6mm
Net weight 70g 70g
Fixedness wall-mounting case with screws
Power supply 5V2A
Consumption ≤3W 3W≤
Operation
temperature 0~40°C
Storage temperature -20~70
°
C
Relative humidity 0~95%(non-condensing)
Installation Requirements
1. HDMI source device (computer graphics card, DVD, PS3, HD
monitoring equipment etc.).
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B.
(It is suggested to use shielding network cable to avoid interference
based on CE requirement)
Product specificaties
Merk: | Digitus |
Categorie: | AV extender |
Model: | DS-55100-1 |
Kleur van het product: | Zwart |
Gewicht verpakking: | 1150 g |
Breedte verpakking: | 150 mm |
Diepte verpakking: | 200 mm |
Hoogte verpakking: | 80 mm |
Soort: | AV-zender & ontvanger |
Gebruikershandleiding: | Ja |
Connectiviteitstechnologie: | Bedraad |
Ondersteunde video-modi: | 1080p |
Maximum resolutie: | 1920 x 1080 Pixels |
Land van herkomst: | China |
Code UK-handelstarief: | 85176200 |
HDCP: | Ja |
Maximale refresh snelheid: | 60 Hz |
Aansluiting voor netstroomadapter: | Ja |
Materiaal: | Metaal |
Remote (IR) ingang: | 1 |
Kleurdiepte: | 8 Bit |
Remote (IR) uitgang: | 1 |
Power over Ethernet (PoE): | Ja |
HDMI in: | 1 |
RJ-45 uitgang ports: | 1 |
Bandbreedte: | 4.95 Gbit/s |
Aantal HDMI-uitgangen: | 2 |
Receiver afmetingen (B x D x H): | 67 x 72 x 23 mm |
RJ-45 invoer ports: | 1 |
(Buitenste) hoofdverpakking hoogte: | 420 mm |
(Buitenste) hoofdverpakking breedte: | 315 mm |
(Buitenste) hoofdverpakking brutogewicht: | 11500 g |
(Buitenste) hoofdverpakking lengte: | 425 mm |
Maximaal bereik: | 50 m |
(Buitenste) hoofdverpakking inhoud: | 56227 cm³ |
Verpakkingsvolume: | 2400 cm³ |
Transmitter afmetingen (WxDxH): | 67 x 72 x 23 mm |
HDCP- & EDID-omzeiling: | Ja |
Ondersteundende kabel types: | Cat6, Cat6a, Cat7 |
Inclusief IR-versterker: | Ja |
Inclusief IR-ontvanger: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Digitus DS-55100-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding AV extender Digitus
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
Handleiding AV extender
- DataVideo
- Vivolink
- Hall Research
- Advantech
- Teufel
- Comprehensive
- Act
- Polycom
- Logilink
- Vision
- IMG Stage Line
- Sescom
- ConnectPro
- Kanex
- UTEPO
Nieuwste handleidingen voor AV extender
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025