Digitus DA-70200 Handleiding

Bekijk gratis de handleiding van Digitus DA-70200 (4 pagina’s), behorend tot de categorie Kabels voor pc's en randapparatuur. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 5.0 sterren uit 9 reviews. Heb je een vraag over Digitus DA-70200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User's Manual

USB 2.0 TO IDE & SATA Cable

1. Characteristics

Support SATA spread-spectrum transmitter

Support SATA II Asynchronous Signal Recovery (Hot Plug) feature

Compliance with USB 2.0 (Hi-Speed USB) electrical specification

Compliance with USB Mass Storage Class Bulk-Only Transport Specification

Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation

Support ATA/ATAPI-7

Support ATA/ATAPI Ultra DMA Mode

Support ATA/ATAPI PACKET command feature set

Support ATA/ATAPI LBA48 addressing mode

Support dual LUN (Logic Unit Number) for USB to ATA/ATAPI

Support Windows 7, Vista, Windows XP, Windows 2000, Windows ME, 98SE

Need driver installation under Windows 98SE

2. Software Installation

Before installation, please connect the hard disk to the USB 2.0 IDE to SATA Cable

Windows 98SE

After installing the driver, please restart the computer, and then plug the USB 2.0 TO IDE&SATA CABLE into the

computer. It’s very important.

1) Please put the enclosed CD into the CD-ROM, and doubly click “setup.exe”

2) The driver is beginning to install

3) When the following screen displays, click ‘Finish’

4) Please plug USB 2.0 TO IDE&SATA CABLE into the computer. The system will find it and install.

Product specificaties