Digital Watchdog NightWatch DW-ILPM1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Digital Watchdog NightWatch DW-ILPM1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Pole–mount bracket for LED illuminators
DW-ILPM1
v
Attention: This document is intended to serve as a quick reference for initial setup.
It is recommended that the user read the entire instruction manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources.
2. Search for your product by entering the part number in the search bar. Results Search by Product’
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will
appear in the results.
Quick Start Guide
WHAT’S IN THE BOX
1 x pole mount bracket
1 x pole clips
1 x quick setup guide
46-3595/(813)888-9555
m
port Hours: 9:00AM – 8 00PM
Rev Date: 08/19
Copyright © Digital Watchdog. All rights reserved.
Specification s and pricing are subject to change without notice.
Quick Start Guide
INSTALLING THE POLE MOUNT BRACKET
Single pole mount bracket is compatible with all DW® NightWatch™ illuminators including DW-ILWM1,
DW-ILWM2 and DW-ILWM3 mount brackets.
The pole mount bracket comes with stainless steel straps to fit 2.95” to 7.87” (7.5 to 20 cm) diameter poles.
LED ILLUMINATOR INSTALLATION WITH POLE MOUNT BRACKET
1 2
3
Place the bracket against the pole in the required position. Thread the steel straps through the slots
located in the bracket and tighten around the pole with a suitable wrench.
A single illuminator can be mounted to the bracket using M6 nuts and bolts. Vertical adjustment can be made
using the two hex bolts on each side of the illuminator. Mounting holes are also provided to pair with single
(DW-ILWM1), double (DW-ILWM2) and triple mounting (DW-ILWM3) brackets.
Pole moun]ng bracket compa]ble with all DW Infra-Red and White-Light illuminators including
WM1,DW-ILWM2andDW-ILWM3moun]ngbrackets.

mpa]ble with all DW Infra-Red and White-Light illuminators including
LWM3moun]ngbrackets.


Product specificaties

Merk: Digital Watchdog
Categorie: Niet gecategoriseerd
Model: NightWatch DW-ILPM1

Heb je hulp nodig?

Als je hulp nodig hebt met Digital Watchdog NightWatch DW-ILPM1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Digital Watchdog

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd