Digital Watchdog DWC-P336CMW Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Digital Watchdog DWC-P336CMW (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
DWC-P336CMW
Ceiling mount bracket for white IP PTZ cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the search bar. Results ‘Search by Product’
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
3x plastic anchors (6pi) 1x hex Allen wrench
3x tapping screws (6x35) 1x quick setup guide
Plastic anchor (3x)
Ceiling mount (1x)
Locking nut (1x)
Tapping screw 6x35 (3x)
Safety wire (1x)
Machine screw M5x6 (1x)
Pipe socket PF 1.5 inch (1x)
Set screw (3x)
Set screw (2x)
Socket (1x)
Adapter PT 1.5 inch (1x)
Set screw (1x)
Start point
Set point
Twist (Long indicator)
(Short indicator)
INSTALLING THE MOUNTING ACCESSORY
Rev Date: 01/20
Copyright © Digital Watchdog. All rights reserved.
SpeciïŹcations and pricing are subject to change without notice.
Quick Start Guide
1. Using the wall mount, mark and drill the mounting holes on the surface using the ceiling mount ïŹ‚ange.
2. Pull wires through to connect to the PTZ camera from the ceiling.
3. Using the plastic anchors and screws*, mount and secure the mounting bracket to the mounting surface.
4.7” (120mm)
4.4” (112mm)
3x 0.25” (6.5mm)
5.07” (129mm)
15.75”
(400mm)
4. Open the access plate and pull out
cables through the rectangular
access hole.
5. Attach the 1.5-inch adapter to the
ceiling mount bracket and ïŹx it
using the set screw.
6. Attach the camera’s safety wire
to the ceiling mount bracket and
organize cables.
7. Close the access plate of the ceiling
mount bracket.
8. Push in and turn the camera
clockwise into the adapter. Fix it
using the set screw of the adapter.


Product specificaties

Merk: Digital Watchdog
Categorie: Niet gecategoriseerd
Model: DWC-P336CMW

Heb je hulp nodig?

Als je hulp nodig hebt met Digital Watchdog DWC-P336CMW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Digital Watchdog

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd