Denver SC-17 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Denver SC-17 (62 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/62
SC-17
User manual
ENG 1
ENGLISH
This chapter provides instructions to install the video baby monitor.
At the first use, please recharge the battery inside the parent unit by using the
power adapter.
The baby unit has a lens cover. Please remove this lid before you start to use the
video baby monitor.
Installation
ALERT
Before placing the camera in a denitive way (baby unit) it is advisable to check the proper
functioning of equipment and proper radio communication between parent unit and baby unit.
1.Connect the 5VDC – 1.000 mA power adapter to parent unit.
The power socket (DC5V ) is in the left side on parent
unit.
Parent Unit – Power adapter
The parent unit has a rechargeable battery, so
when it is charged enough, you can use the device
without the power adapter. For more details please
refer to the parent unit chapter.
NOTE
2.Press the power button , the green power LED available
in the left side will light ON. The display will show as picture
below:
Parent Unit – Power ONParent Unit – LCD panel
3.Connect the 5VDC – 1.000 mA power adapter to Baby Unit
(wireless camera). The power socket (DC5V ) is in
the back side.
The wireless camera can use 3 x AAA batteries
(not included). For more details please refer to
Baby Unit chapter Baby Unit – Power adapter
4.Press and hold the POWER ON/OFF button for 5-6 seconds
until the LED will flashing in red colour. This means that the
pairing phase is started.
Baby Unit – Power ON
5.With a thin object, such as a paper clip, press the RESET
button on the back side of the parent unit, the display should
show the images and you can hear the sound picked up by the
microphone inside the wireless camera.
Now you can turn o the camera and place it in
the nal place. For next use is no longer necessary
to repeat the pairing phase. Parent Unit - Pairing
NOTE
ENG 2
ENGLISH
Description
The pairing phase must be completed within 30 seconds. If you are unable to
complete its on time, wait until the red LED on the camera stays light ON, then
turn o the camera and try again. Once successfully completed there is no need
to repeat the pairing phase.
This chapter provides a description of parent unit and baby unit.
Parent Unit - Description 1.Power button (ON/OFF)
2.LCD Panel
3.Channel radio (1-2-3-4)
4.TALK button
5. and OK buttons
6.Speaker
7.RESET button
8.Le side: power connector and LED
9.Right side: AV OUT connector
10.Clip
11.Radio signal strength icon
12.Channel icon
13.Battery charge icon
Parent Unit – Talk and Listen function
This appliance has a dual connection between parent unit and baby unit (2 ways). This means
that you can speak with your baby by talking in the microphone inside the parent unit and your
voice will be heard by the baby through the speaker inside the camera, so you can calm him
without moving.
To talk with your baby please follow these steps:
1.Please check if the wireless camera is active then power ON the parent unit.
2.Press and hold the TALK button then start to speak near the parent unit.
3.Release the TALK button to listen your baby.
2
1
3
4
5
10
9
6
7
8
11 12 13
LCD Panel
NOTE


Product specificaties

Merk: Denver
Categorie: Babyfoon
Model: SC-17

Heb je hulp nodig?

Als je hulp nodig hebt met Denver SC-17 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Babyfoon Denver

Handleiding Babyfoon

Nieuwste handleidingen voor Babyfoon