Denver CCT-5001 MK2 Handleiding
Bekijk gratis de handleiding van Denver CCT-5001 MK2 (7 pagina’s), behorend tot de categorie Dashcam. Deze gids werd als nuttig beoordeeld door 70 mensen en kreeg gemiddeld 4.0 sterren uit 35.5 reviews. Heb je een vraag over Denver CCT-5001 MK2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/7

ENG-1
CCT-5001 MK2
USER MANUAL
www.facebook.com/denverelectronics

ENG-2
Part of the camcorder
Preparing for using
1. HDMI port
2. Micro SD card slot
3. Tripod slot
4. ON/OFF
5. Shutter
6. Screen
7. Busy indicator light
8. USB port
9. Reset
10. AV out
11. Protector
12. Speaker
13. Microphone
14. Lens
15. LED lamp
16. UP
17. DOWN
18. Menu
19. Mode
Power capacity
For the power capacity in the battery, refer to the following icons:
Full
Middle
Low
1. Connect device to car adaptor through Mini-USB port, device will power on automatically
& enter standby mode and start charging with green indicator light ON.
Once device has been fully charged, red indicator light goes out.
2. Connect device to PC via USB cable, device will power on automatically. A “Mass
storage” icon will display on the screen. At this time, it means charging normal. then
turning off the camcorder can save more electricity.
Installation and Removal of micro SD card
1. In the direction as indicated, insert the SD card into the slot until it is held firmly.
2. To take the SD card out, slightly press the SD card to eject it out.
Note:
1. Observe the direction to insert the SD card; if the direction is reverse, the device and the
SD card may be damaged.
2. When the SD card is inserted into the device, the machine will set the SD card as preset

ENG-3
storage unit and the data in the original SD card will be unreadable.
3. If the SD card is incompatible with the device, please insert the card again or replace it for
retry.
4. Max. 32 G supported.
5. Always use a high-speed SD card (CLASS 4 above).
Use Guidelines
DVR On/Off
1. Press the ON/OFF key for 3 second to switch ON and hold for 3 seconds to switch OFF
device manually.
2. Connect the device with car charger in the car. When car engine starts up, device will be
switched ON automatically. When car engine shuts off or car charger been
disconnected, device switches OFF with 10 seconds delay (as per setting).
Switch Working Modes
1. Press the Mode key to switch Video/Image/playback, as video mode while as
image mode. These icons are screen on the left upper corner of the screen.
How to Enter System Setup Option
In video or image mode, press the Menu - Mode key once and press the shutter key to enter
the “System Setup” option,
- Date: [On]/[off]/[Set date]
- Auto power off: [1min]/[ 3min]/[5min]/[off]
- Protect level: [Super low sensitivity]/[Low sensitivity]/[Middle sensitivity]/[High
sensitivity]/[Super high sensitivity]
- Beep sound: [On]/[off]
- Auto display off: [1min]/[3min]/[5min]/[Off]
- Language:
[German]/[Danish]/[Spanish]/[French]/[Italian]/[Dutch]/[Polish]/[Portuguese]/[Swedish]/[
Finnish]/[English]
- Frequency: [50HZ]/[60HZ]
- TV mode: [NTSC] /[PAL]
- Image rotation: [On]/[Off]
- IR LED: [On]/[Off]
- Format: [Cancel]/[OK]
- Default setting: [OK]/[Cancel]
How to Take Videos and Set Video Options
Product specificaties
Merk: | Denver |
Categorie: | Dashcam |
Model: | CCT-5001 MK2 |
Kleur van het product: | Zwart |
Ingebouwd display: | Ja |
Gewicht: | 320 g |
Breedte: | 46 mm |
Diepte: | 74 mm |
Hoogte: | 32 mm |
Breedte verpakking: | 140 mm |
Diepte verpakking: | 170 mm |
Hoogte verpakking: | 75 mm |
Capaciteit van de accu/batterij: | 350 mAh |
Beeldscherm: | LCD |
Beeldschermdiagonaal: | 2.7 " |
Maximale capaciteit van de geheugenkaart: | 32 GB |
GPS: | Nee |
Totaal aantal megapixels: | - MP |
Videocompressieformaten: | AVI |
Type stroombron: | Battery, DC |
Aantal cameras: | 1 |
Compatibele geheugenkaarten: | MicroSD (TransFlash) |
Maximale beeldsnelheid: | 30 fps |
Aantal HDMI-poorten: | 1 |
Ingebouwde luidsprekers: | Ja |
HD type: | Full HD |
Ingebouwde microfoon: | Ja |
Temperatuur bij opslag: | - °C |
Luchtvochtigheid bij opslag: | - procent |
Bewegingssensor: | Ja |
Hoofdcamera resolutie: | 1920 x 1080 Pixels |
Hoofd-camera kijkhoek: | 104 ° |
Audio-opname: | Ja |
Mini-USB ports hoeveelheid: | 1 |
Ingebouwde opslagmedia: | Nee |
Wifi: | Nee |
Bedrijfstemperatuur (T-T): | - °C |
Relatieve vochtigheid in bedrijf (V-V): | - procent |
Batterijtechnologie: | Lithium-Ion (Li-Ion) |
Producten per intermodale container (40 ft - High Cube): | 22960 stuk(s) |
Producten per intermodale container (20 ft): | 9200 stuk(s) |
Camera breedte: | - mm |
Camera diepte: | - mm |
Camera hoogte: | - mm |
G-schok sensor: | Ja |
Loop video-opname: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Denver CCT-5001 MK2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Dashcam Denver
25 Juni 2023
9 Mei 2023
29 April 2023
4 April 2023
4 April 2023
17 Februari 2023
2 Februari 2023
18 Januari 2023
29 November 2022
20 Oktober 2022
Handleiding Dashcam
- Brigmton
- EVOLVEO
- Swann
- Roadeyes
- Elro
- Boyo
- Andatech
- Dometic
- Prestigio
- Kapture
- IRoad
- Trebs
- Gembird
- AZDome
- CamOne
Nieuwste handleidingen voor Dashcam
29 Juli 2025
15 Juli 2025
1 Juli 2025
30 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
8 Juni 2025
22 Mei 2025
2 Mei 2025