Denver ACT-1301 Handleiding

Bekijk gratis de handleiding van Denver ACT-1301 (4 pagina’s), behorend tot de categorie Camcorder. Deze gids werd als nuttig beoordeeld door 73 mensen en kreeg gemiddeld 4.7 sterren uit 4 reviews. Heb je een vraag over Denver ACT-1301 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ACT-1301 Quick Start Guide

ENG-1

Appearance and key introduction

Key/Indic

ator

Function

Power

On/Off

Power the camera on or off. When opening the

menu, switch over between normal (effect

parameters and replay of image, video) and

setup menu.

Shutter

In recording video mode, it is used to start/stop

recording. In capture mode, it is used as a

shutter. In replay mode; it is used to play the

video. When operating the menu, it is used to

confirm the selection.

Up key

Digital zoom in (capture/video mode); menu

selection (after opening the menu); pause,

continue playing (when playing and recording

video in replay mode).

OK key

Open/exit from menu. Stop playing (when

replaying video).

Down key

Digital zoom out (capture/video mode); menu

selection (after opening the menu).

Mode

switch

Switch over among modes of capture, video and

replay.

Operation

indicator

The upper one is

a charging

indicator.

In power-off state, it keeps

constant lighting when the

charger is connected for

charging.

The lower one is

an operation

indicator.

It flashes once during

capturing, and it keeps

constant lighting when

connected with computer

portable disk.

Start Use

1. Charge built- in lithium battery

In power-off state, when the camera is connected with computer,

charging begins. At this time, the charger indicator lights and it

turns off when charged full. Generally, it costs 2-4 hours to charge

full.

2. Use memory card

1. Follow the instructions carved by slot of the memory card, it is to

insert FT card into the card slot till entirely inserted.

2. To take the FT card out, after gently pressing the end of the

memory card inwards, the card will reject out.

Note: The camera is not equipped with a builtin memory, -

and thus a memory card is required.

3. Power On/Off:

3.1 Power-on: If to press and hold POWER key for 3 seconds,

the screen starts up and the camera enters startup state.

-3.2 Poweroff: In idle state of the camera, if to click POWER key,

the camera turns off.

Automatic power-off: When idle time set for the camera

reaches, it automatically turns off to save power. The default

time of the system automatic poweroff is 5 minutes; -

3.3 Power-off due to low battery: In case of extremely low battery,

the icon “ ”appears on the LCD screen. Please

timely charge the battery. When the icon turns red and

flashes, the camera will automatically power off.

4. Functional mode switchover

The camera is equipped with three modes: capture, video and

replay mode. After power on, the modes can be switched over -

with MODE switch.

5. Indicators

Operation indicator: When the camera works (e.g. recording

video, capturing or automatic screen

turn-off), the operation indicator lights.

Charger indicator: Constant lighting is to remind user that the

camera is being charged.

6 Video mode

( With maximum 29 minutes video recording per sequence)

When pushing Mode switch to video mode, click shutter in

preview state to start recording video; to stop video

recording, it is to click it again. It will also automatically

stop recording in case that no free room left in the memory

card or the battery is over low:

1 00:00:01: time-meter, indicating 1 second left for recording

(indicating 1 second recorded during recording).

2 : mode icon: indicates the current mode is video

recording.

3 : loop recording video time icon: indicates the current

loop video recording time is 3 minutes.

4 : movie size: indicates the current movie size is 720P.

5 : indicates currently a memory card is inserted.

6 : magnification of digital zoom: press Up and down

key to

adjust zoom among 1x- 4x.

7 : battery icon: indicates current battery level.

8 : white balance icon: indicates the current white

balance mode is automatic.

9 ：metering icon: indicates it is currently the pan overall

perspective metering.

Video menu setup

In video mode, press OK key to open menu, and then press Up

USB Cable

Capture modeTake pictures.:

Video mode: Record video and

driving (5min, 3min and 1min).

Replay mode: Picture and video

fil.e playback

Mode switch:

- Photograph

-Video

-Replay

Lens

Power

On/Off

Shutter

Charging indicator

Operation indicator

Up key

OK key

Down key

LCD TFT

Product specificaties