Dascom Tally DP-541 SE Handleiding

Dascom Printer Tally DP-541 SE

Lees hieronder de 📖 handleiding in het Nederlandse voor Dascom Tally DP-541 SE (34 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34
f
DASCOM Europe GmbH
Heuweg 3
Ulm Germany
D-89079
+49 (0) 731 2075 543
www.dascomeurope.de
www,dascom.com
DP- Series 541
Operator’s Manual
i www.dascomeurope.de | +49 (0) 731 2075 543
FCC Part 15 Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and the receiver.
 Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Canadian and FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
Part 15.21 Caution: Changes or modications not expressly approved by Dascom could void the user’s authority to operate
the equipment.
Canadian Department of Communications Radio Interference Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operaon is subject to the following two
condions: 1) this device may not cause interference; 2) this device must accept any interference, including
interference that may cause undesired operaon of the device. Under Industry Canada regulaons, this radio
transmier may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmier
by Industry Canada. To reduce potenal radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communicaon. Maximum power output plus maximum antenna gain of the EUT is: 4.5W/m 2 , Limit is 10Wm2.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitaon est autorisĂ©e aux deux condions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'ulisateur de l'appareil doit accepter tout brouillage radioĂ©lectrique subi, mĂȘme si le brouillage est suscepble d'en
compromere le fonconnement. ConformĂ©ment Ă  la rĂ©glementaon d'Industrie Canada, le prĂ©sent Ă©meeur radio
peut fonconner avec une antenne d'un type et d'un gain maximal (ou infĂ©rieur) approuvĂ© pour l'Ă©meeur par
Industrie Canada.
Dans le but de rĂ©duire les risques de brouillage radioĂ©lectrique Ă  l'intenon des autres ulisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensitĂ© nĂ©cessaire Ă  l'Ă©tablissement d'une communicaon sasfaisante. La puissance de sore maximale plus
gain d'antenne maximal du EUT est : 4.5W/m2 Limite est 10W/m2
ii www.dascomeurope.de | +49 (0) 731 2075 543
Battery Disposal
Only dispose of used batteries according to your local regulations.
Acknowledgments:
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Zebra, CPCL and ZPLare registered trademarks of Zebra Technologies
Wi- is a registered trademark of the Wi-Fi Alliance Fi
Windows is a registered trademark of Microsoft Corporation
All other trademarks are the property of their respective owners.
Read all set up and operating instructions before proceeding with operation. Do not operate in an enclosure unless properly
ventilated. Do not operate near a heat source.
Lesen Sie vor der Inbetriebnahme die Aufbau- und Bedienungsanleitung Betreiben Sie den Drucker nicht in einem kleinen,
geschlossenen Raum, es sei denn dieser wird ordnungsgemĂ€ĂŸ belĂŒftet. Nehmen Sie den Drucker nicht in der NĂ€he einer WĂ€rmequelle in
Betrieb
No user-serviceable parts inside. Refer service or repairs to a qualified service professional. Use of genuine Dascom replacement
parts is required to warrant proper, safe operation. Any alteration or modification of this device voids the user warranty and may make the
product unsafe to operate. The print head and motors get hot during use. Wait until they cool before touching them. Make certain the printer
is disconnected from AC power before removing any covers or performing any required cleaning or maintenance. Connecting this printer
to an ungrounded receptacle can result in electrical shock. Never place the printer near inflammable or explosive substances. Do not
operate near liquid or spill liquid into the printer at any time.
EnthÀlt keine Teile, die vom Bediener instandgesetzt werden können. Bitte wenden Sie sich bei Instandsetzung oder Reparatur an
qualifiziertes Kundendienstpersonal. Die Verwendung von echten Dascom Ersatzteilen ist notwendig, um ordnungsgemĂ€ĂŸen, sicheren
Betrieb zu gewĂ€hrleisten. Änderungen oder Modifikationen dieses GerĂ€ts machen die Garantie ungĂŒltig und können den sicheren Betrieb
des Produkts gefĂ€hrden. WĂ€hrend des Druckens werden Druckerkopf und Motoren heiß. Warten Sie, bis sich die Teile abgekĂŒhlt haben,
bevor Sie sie berĂŒhren. Vergewissern Sie sich, dass der Drucker nicht mehr an die Stromquelle angeschlossen ist, bevor Sie Abdeckungen
abnehmen oder das GerĂ€t reinigen bzw. warten. Schließen Sie diesen Drucker nicht an eine ungeerdete Steckdose an; dies kann zum
Elektroschock fĂŒhren. Setzen Sie den Drucker niemals in die NĂ€he von feuer- oder explosionsgefĂ€hrlichen Stoffen. Betreiben Sie den
Drucker nicht in der NĂ€he von FlĂŒssigkeiten und lassen Sie keine FlĂŒssigkeiten in den Drucker gelangen.
Specications are subject to change without notice.


Product specificaties

Merk: Dascom
Categorie: Printer
Model: Tally DP-541 SE

Heb je hulp nodig?

Als je hulp nodig hebt met Dascom Tally DP-541 SE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Printer Dascom

Handleiding Printer

Nieuwste handleidingen voor Printer