Epson WorkForce WF-2990 Handleiding


Pagina's 4 Printer

Bekijk de handleiding van Epson WorkForce WF-2990 gratis online of download de PDF. 3 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

Start Here
2 Gently shake the black ink
cartridge.
Caution: Do not shake the other
ink cartridges.
3 Unpack the ink cartridges.
4 Remove only the
yellow tape from
Caution: Do not
remove any other labels
or seals, or ink will leak.
Do not touch the areas
shown here.
5 Insert the cartridge into the holder for each color. Press
each cartridge down rmly to make sure all cartridges are
securely in place.
6 Lower the scanner unit.
Note: Continue to lower the scanner unit even if you feel some
resistance.
7 Select Installed. The printer starts charging the ink. Ink
charging takes approximately 5 minutes. When you see a
completion message on the printer’s LCD screen, charging
is complete.
Caution: Don’t turn o the printer or raise the scanner unit while
the printer is charging or you’ll waste ink.
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User’sGuide.
Note:This printer is designed for use with Epson® cartridges only, not
third-party cartridges or ink. For important ink information, visit
https://epson.com/epsonink (U.S.) or https://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
• If the power cord that comes with your printer has a grounding pin,
connect the printer to a grounded outlet.
Caution:To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the WF-2990, but the steps are the same for
the other models, unless otherwise specied.
1
Unpack
Note: Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1 Remove all protective materials from the product and lift
up the scanner unit until it locks into place.
2 Remove all protective
materials from inside
theproduct.
Caution: Do not touch
theat white cable.
3 Lower the scanner unit.
Note: Continue to lower the scanner unit even if you feel some
resistance.
4 Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
Note: As part of setup, your product’s serial number will be sent to
a secure Epson server so that you can be eligible to participate in
programs we may oer from time to time. You will have a separate
opportunity to consent to participating in such programs.
2
Choose a setup method
The Epson Smart Panel® app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet. After setup, you’ll be able to print and
scan directly from the app.
Note: If you want to print and scan from your computer, you need to
install the product’s software. See the “Install software” section on this
sheet for instructions.
To use your computer for
setup, skip to the “Turn on
and congure” section.
To use your mobile device
for setup (recommended),
continue to step 1.
OR
1 Download the Epson Smart Panel app
from your device’s app store. Do not
launchtheapp yet.
2 Hold the power button until it lights up to turn on the
product.
Note:Do not connect your product to your computer yet.
3 Launch the app and follow its instructions to set up your
product. If necessary, tap the icon on the top corner of +
the app’s home screen, select the option to set up a new
product, and follow the instructions.
See below for information on solving problems or reaching
Epson support.
3
Turn on and configure
1 Raise up the control panel, turn on the product, and wait
for the power light to turn on.
Note: If an error code appears, turn o the product and check that
no protective material has been left inside the product.
2 Select your language.
3 When you see the Epson Smart Panel setup screen, select
the option to continue without the app.
4 Select your country, date, and time.
Note:You can change these settings later using the product’s
control panel. For more information, see the online User’s Guide.
4
Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
Note:
• For the initial setup, make sure you use the ink cartridges that came
with this printer.
• The ink in the ink cartridges supplied with your printer is partly used
during initial setup. In order to produce high quality printouts, the
print head in your printer will be fully charged with ink. This one-off
process consumes a quantity of ink and therefore these cartridges
may print fewer pages compared to subsequent ink cartridges.
• The included initial cartridges are designed for reliable printer setup
and cannot be used as replacement cartridges or resold. After setup,
the remaining ink is available for printing.
1 Lift up the scanner
unit until it locks
into place.
WF-2990 Series

Beoordeel deze handleiding


Alle foutcodes Epson Printer 25 foutcodes uit 11 handleidingen, met hun betekenis.

Product specificaties

Merk: Epson
Categorie: Printer
Model: WorkForce WF-2990

Heb je hulp nodig?

Als je hulp nodig hebt met Epson WorkForce WF-2990 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden