Danfoss TP5000 Si Handleiding

Bekijk gratis de handleiding van Danfoss TP5000 Si (2 pagina’s), behorend tot de categorie ivópalack. Deze gids werd als nuttig beoordeeld door 37 mensen en kreeg gemiddeld 4.5 sterren uit 4 reviews. Heb je een vraag over Danfoss TP5000 Si of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Fig.1

TP5000 Si/TP5000 RF Si

User Instructions

Mon-Fri Sat-Sun

Fig.2

Before programming the thermostat press and release the RESET button to restart

the unit. (Fig. 1)

Setting the Clock and Day

The day and time are set in the factory and therefore it will not normally be necessary

to do this on site. Changes between summer and winter time are handled automatically

by the unit.

Accepting the Factory Pre-settings

The TP5000 Si has pre-set times already programmed in, which often suit most people

(see table below).

Note: If set up for 4 events per day, events 3 & 4 are skipped. If set up for 2 events per

day, events 2, 3, 4 & 5 are skipped and the events are re-numbered.

To adjust the factory pre-settings & set your own time and temperature

programmes

For Days 1-5 (weekdays)

a) Press PROG(Fig. 2)until the 1st pre-set time and temperature (Event 1 Days 1,2,3,4,5)

(Fig. 3).

b) Use + or – buttons (Fig. 4)to adjust the TIME (press and hold to change in 10 min

increments).

c) Use Λ or V buttons (Fig. 5) to adjust the TEMPERATURE.

d) Press PROG (Fig. 2) to move to next preset time & temp (Event 2) (Fig. 6).

e) Repeat steps b, c & d for programming Events 3, 4, 5 & 6.

For Days 6-7 (weekends)

Press •PROG (Fig. 2)to show 1st pre-set time and temperature (Event 1 Days 6-7)

(Fig. 7).

Repeat steps b, c and d above to programme time and temperature events for •

the weekend.

Returning to RUN mode

Press PROG (Fig. 2) – the colon in the LCD display will start to flash (Fig. 8).

Fig.5

Fig.4

Fig.6

Fig.7

Fig.8

EventTimeTemp. °C

106:30 20

208:30 15

311:30 20

413:30 15

516:30 21

622:30 15

EventTimeTemp. °C

107:30 20

209:30 20

311:30 20

413:30 20

516:30 20

622:30 15

RESET

Fig.3

Complete Shut off - Summer time

Press Λ and V together to enter thermostat mode. A frost protection symbol (snowflake in a

shield) will appear in the display . Press the down arrow ∨ once, OFF will appear in the display.

To return to automatic programming press both ∧ and ∨together.

Product specificaties