Dahua Technology AX18 Handleiding

Dahua Technology Router AX18

Lees hieronder de 📖 handleiding in het Nederlandse voor Dahua Technology AX18 (2 pagina's) in de categorie Router. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Table 1-1 Indicator description

Solid green Internet a ess available.cc

Solid red Unable to a ess the Internet. (Router connected, but cc

network disconnected. )

Flashes

Connection Diagram

Figure 2-1 Connection dia amgr

DH-AX18

User’s Manual

Website: www.dahuasecurity.com

Address: No. 1399, Binxing Road, Binjiang District, Hangzhou, P. R. China Postcode: 310053

Tel: +86-571-87688888 28933188

Email: dhoverseas@dhvisiontech.com

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Foreword

This manual introduces the installation, functions and operations of the

DH-AX18 device (hereinafter referred to as "the Device"). Read carefully

before using the device, and keep the manual safe for future reference.

Safety Instructions

The following signal words might appear in the manual.

Signal W ords Meaning

Ind ates a high potential haza d wh ch, if not avoided will result in ic r i ,

death or serious injury.

Ind ca es a medium or lowi t potential hazard which, f not avoided, i

could result in s light or moderate injury.

In cates a poten ial risk which f no avoided, c ould result n propertydi t , i t i

damage, data loss reductions in performance or unpredictable , ,

results.

P ov des methods to he p you s o ve a problem or save time. r i l l

Pro des additional information as a s upplement to the textvi .

About the Manual

The manual is for reference only. Slight dierences might be found

between the manual and the product.

We are not liable for losses incurred due to operating the product in

ways that are not in compliance with the manual.

The manual will be updated according to the latest laws and

regulations of related jurisdictions. For detailed information, see

the paper user’s manual, use our CD-ROM, scan the QR code or

visit our ocial website. The manual is for reference only. Slight

dierences might be found between the electronic version and the

paper version.

Upgrade the reader software or try other mainstream reader

●

●There might be errors in the print or deviations in the description of

the functions, operations and technical data. If there is any doubt or

dispute, we reserve the right of nal explanation.

software if the manual (in PDF format) cannot be opened.

This section introduces content covering the proper handling of the

device, hazard prevention, and prevention of property damage. Read

carefully before using the device, and comply with the guidelines when

using it.

●Transport the device under allowed humidity and temperature

conditions. Refer to the technical parameters for requirements on

the transporting temperature and humidity of the device.

Storage Requirements

●Store the device under allowed humidity and temperature

conditions. Refer to the technical parameters for requirements on

the storing temperature and humidity of the device.

Installation Requirements

●Do not connect the power adapter to the device while the adapter

is powered on.

●Strictly comply with the local electrical safety code and standards.

Make sure the ambient voltage is stable and meets the power

supply requirements of the device.

●

Do not leave outdoor models of the device hanging in the air or

facing outwards when installing onto poles that are on top of

buildings.

Do not place the device in a place exposed to sunlight or near

heat sources.

●

●Put the device in a well-ventilated place, and do not block its

ventilation.

Use an adapter or cabinet power supply provided by the

manufacturer.

●

To ensure heat dissipation, the gap between the device and the

surrounding area should not be less than 10 cm on the sides and

10 cm on top of the device.

●

When installing the device, make sure that the power plug and

appliance coupler can be easily reached to cut o power.

●

Voltage stabilizer and lightning surge protector are optional depending

on the actual power supply on site and the ambient environment.

●

Operation Requirements

Do not disassemble the device without professional instruction.

●

Operate the device within the rated range of power input and output.

●

Make sure that the power supply is correct before use.

●

Make sure the device is powered o before disassembling wires to

avoid personal injury.

●

Do not unplug the power cord on the side of the device while the

adapter is powered on.

●

Use the device under allowed humidity and temperature conditions.

●

Operating temperature: 0°C–40 °C (32 °F–104 °F)ns.

●

Do not drop or splash liquid onto the device, and make sure that there

is no object lled with liquid on the device to prevent liquid from

owing into it.

●

Do not block the ventilator of the device with objects, such as a

newspaper, table cloth or curtain.

●

Do not place an open ame on the device, such as a lit candle.

●

Maintenance Requirements

Power o the device before maintenance.●

Mark key components on the maintenance circuit diagram with

warning signs.

●

Port and Indicator

Status Description

Flashes quickly (T=240 ms) for120 s: WPS process.

Flashes slowly (T=2 s) for10 s: Resetting process.

Connect your device to the

router through Ethernet cable.

Connect your device to the

router through wireless.

Connect to modem.

Connect to Internet port.

Modem

Socket

Network port

Power

Ethernet cable

Important Safeguards and Warnings Conguring the Router

You can initialize the device and log in to the app to congure the device.

For the rst time use or after the device is restored to its factory

defaults, you need to initialize the device.

●

To protect your device, keep the admin login password safe after

initialization, and change the password regularly.

●

For more details on app conguration, go to Me > User Manual

on WiLynk.

●

3.1.1 Downloading App

Scan the QR code to download the WiLynk app.

Figure 3-1 QR code

You can also search for WiLynk at the app store, and then download it.

3.1.2 Registering Accounts

Procedure

Open WiLynk, tap , and then enter the page.Register Register

Step 2

Step 1

Select the country or region, enter the email address or phone

number, enter the password, and then conrm it.

Step 4

Step 3 Tap the checkbox.I have read and agree

You can click to view the user service agreement and privacy policy.

Phone number is only supported in select countries.

Click Send.

Enter the verication code, and then click OK.

Step 5

Figure 3-2 Registration

3.1.3 Adding Devices

Prerequisites

Make sure that the device is connected with power and modem. After the

device is powered on, wait for 2 minutes, and then add devices.

Procedure

On the page, tap or on the right-upper corner.Status Add Device

Step 1

Step 2 Scan the QR code on the device, or tap of the device, and Select Type

then enter the SN.

Step 4

Step 3 Go to the Wi-Fi settings on your system settings, connect the router

SSID, and then tap Next.

Congure the login password of the device, and then tap Next.

Congure the networking method of the device, and then tap Next.Step 5

Step 6

Step 7

Wait until the screen prompts , and then tap Connect to Internet Next.

Congure the time zone and DST of the device, congure the device

SSID, and then tap to nish the conguration.Next

Figure 3-3 Preparations for adding device Figure 3-4 Add devices Figure 3-7 Network settings Step 8 Enter the page, set Wi-Fi name, password andWLAN Setting

power, and then click .Save

Figure 3-8 WLAN settings

Procedure

Figure 3-6 WAN settings

If you can a ess Internet without any settings on your cc

bandwidth, select DHCP as the networking method.

If your bandwidth cannot obtain IP address automatically,

contact network administrator or bandwidth service provider,

select Static IP as the networking method, and then enter

related information as guided.

If you need to enter the a ount and password to a ess cc cc

Internet, select PPPoE as the networking method, and then enter

bandwidth account and bandwidth passwo .rd

The end device connects to the router through wired

and wireless connection. Enter the device domain name

( ) or device IP( ) to log in dahuawi.com default IP 192.168.10.110

to the device to congure settings.

Step 2 Click OK .

Step 3 Select the I have read and agree to the terms of the Software

License Agreement and Privacy Policy checkbox, and then

click .OK

Step 1

Step 4

Step 5 Enter the login password, and then enter the web page.

Step 6

Step 7 WAN settings: You can change the networking method (default

DHCP), click the to change, and then click .icons Next

Figure 3-5 Congure time zone and Wi-Fi network

3.1 App Conguration

You can initialize the device and log in to it through the device webpage

and WiLynk app.

3.2 Web Conguration

You can initialize the device and log in to it through the device webpage.

For the rst-time login,the device will pop up a setup wizard.

For the rst-time login,you need to set the login password,and then

click .NEXT

●

WPSWPS LA N1 LAN2 LAN3 WAN DC INRESE T OR

Table 2-1 Rear panel description

1Reset button. Press and hold the button for more than 5

seconds, and then the router will restore its factory defaults.

Number Description

LAN port. Connects to wired devices such as computers and

set top boxes.

WPS button. Short press for WPS function.

WAN port. Connects to the modem or Ethernet port.

Power port. Connects to the power supply.

12 3 4 5

●Do not disassemble it unless necessary.

Personnel working at heights must take all necessary measures to

ensure personal safety including wearing a helmet and safety belts.

●

Do not connect the device to two or more kinds of power supplies,

to avoid damage to the device.

●

The device is a class I electrical appliance. Make sure that the power supply

of the device is connected to a power socket with protective earthing.

●

Product specificaties

Merk:	Dahua Technology
Categorie:	Router
Model:	AX18
Kleur van het product:	Zwart
Gewicht:	430 g
Breedte:	155 mm
Diepte:	252 mm
Hoogte:	178 mm
Gewicht verpakking:	730 g
Breedte verpakking:	298 mm
Diepte verpakking:	309 mm
Hoogte verpakking:	61 mm
Wi-Fi-standaarden:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
USB-poort:	Nee
Ethernet LAN:	Ja
Type stroombron:	DC
Meegeleverde kabels:	LAN (RJ-45)
Inclusief AC-adapter:	Ja
Indicatielampje:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	4
MIMO:	Ja
Aansluiting voor netstroomadapter:	Ja
Intern geheugen:	128 MB
SIM-kaartsleuf:	Nee
3G/4G USB modem compatibiliteit:	Nee
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard:	Wi-Fi 6 (802.11ax)
WLAN gegevensoverdrachtsnelheid (max):	1800 Mbit/s
WLAN gegevensoverdrachtsnelheid (eerste band):	574 Mbit/s
WLAN gegevensoverdrachtsnelheid (tweede band):	1201 Mbit/s
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Ondersteunde beveiligingsalgoritmen:	WPA, WPA-PSK, WPA2-PSK, WPA3-SAE
Soort antenne:	2x2
Antennas quantity:	4
Antenne versterkingsniveau (max):	5 dBi
Temperatuur bij opslag:	-20 - 70 °C
Upgraden van firmware mogelijk:	Ja
Web-gebaseerd management:	Ja
Reset button:	Ja
Externe adapter:	Ja
Bandbreedte (eerste):	2.484 GHz
Ethernet WAN:	Ja
Output current:	1 A
Spanning:	12 V
Snelle installatiehandleiding:	Ja
Flash memory:	256 MB
DHCP server:	Ja
Ouderlijk toezicht:	Ja
Kanaalbandbreedte:	80 MHz
Quality of Service (QoS):	Ja
DHCP client:	Ja
Aantal kanalen:	165 kanalen
Network address translation (NAT):	Ja
Aantal gelijktijdig verbonden apparaten (max):	32
DSL WAN:	Nee
Maximum indoorbereik:	63 m
WPS Push Button Security:	Ja
Automatische kanaalselectie:	Ja
Type WAN-aansluiting:	RJ-45
Stroomverbruik (typisch):	12 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Type product:	Router om neer te zetten
Aantal producten inbegrepen:	1 stuk(s)
MU-MIMO-technologie:	Ja
VPN eigenschappen:	L2TP\nPPTP
Antenne-ontwerp:	Extern
Dynamic DNS (DDNS):	Ja
Bandbreedte (tweede):	5.85 GHz
System event log:	Ja
Aantal gegevensstromen:	2x2