Daewoo DATMF16-2 Handleiding
Daewoo
Betonbreker
DATMF16-2
Bekijk gratis de handleiding van Daewoo DATMF16-2 (12 pagina’s), behorend tot de categorie Betonbreker. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 1.5 reviews. Heb je een vraag over Daewoo DATMF16-2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
Manufactured under license of , KoreaDaewoo International Corporation
www.daewoopowerproducts.com
USER'S MANUAL
DATMF SERIES
Concrete Cutter
1
INDEX
1
. RULES FOR SAFE OPERATION .............................................................................................................. 2
2. OPERATION ............................................................................................................................................. 3
3. MAINTENANCE - TROUBLESHOOTING ................................................................................................ 6
4. LUBRICATION AND SERVICE ................................................................................................................. 9
5. SPECIFICATION ....................................................................................................................................... 9
6. TRANSPORTATION ................................................................................................................................. 9
2
1. RULES FOR SAFE OPERATION
WARNING:
Failure to fallow instructions in this manual may lead to serious injury or even death! This equipment
is to be operated by trained and qualified personnel only! This equipment is far industrial use only.
The fallowing safety guidelines should always be used when operating these Floor Saws:
GENERAL SAFETY
• DO NOT operate or service this equipment befare reading the entire manual.
• This equipment should not be operated by persons under 18 years of age.
• NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed
boots and other protective devices required by the job.
• NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
• NEVER operate this equipment under the influence or drugs or alcohol.
• NEVER use accessories or attachments, which are not recommended by our company far this
equipment. Damage to the equipment and/or injury to user may result.
• The manufacturer does not assume responsibility far any accident due to equipment modifications.
• Whenever necessary, replace nameplate, operation and safety decals when they become difficult
to read.
• ALWAYS check the machine far loosened threads or bolts befare starting.
• NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool befare servi-
cing engine or saw.
• High Temperatures - Allow the engine to cool befare adding fuel or performing service and mainte-
nance functions. Contact with hot components can cause serous bums.
• The engine section of this saw requires an adequate free flow of cooling air. NEVER operate the
saw in any enclosed or narrow area where free flow of the air is restricted. lf the air flow is restricted it
will cause serious damage to the saw or engine and may cause injury to people. Remember the saw's
engine gives off DEADLY carbon monoxide gas.
• ALWAYS refuel in a well-ventilated area, away from sparks and open flames.
• ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the
engine and allow it to cool. DO NOT smoke around or near the machine. Fire or explosion could result
from fuel vapors, or if fuel is spilled on a hot engine.
• NEVER operate the saw in an explosive atmosphere or near combustible materials. An explosion or
fire could result causing severe bodily harm or even death.
• Topping-off to the fue/ filler port is dangerous, as it tends to spill fuel.
• NEVER use fuel as a cleaning agent.
• ALWAYS read, understand, and fallow procedures in operator's Manual befare attempting to opera-
te equipment.
• ALWAYS be sure to operator is familiar with proper safety precautions and operating techniques
befare using the saw.
• Stop the engine when leaving the saw unattended.
• Block the unit when leaving or when using on a slope.
• Maintain this equipment in a safe operating condition at all times.
• ALWAYS stop the engine befare serving, adding fuel and oil.
• NEVER run engine without air filter. Severe engine damage may occur.
• ALWAYS service air cleaner frequently to prevent carburetor malfunction.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.
• NEVER operate this cutter in areas that contain combustible material or fumes. Fire and/or exploIV
LUBRICATION AND SERVICE from the equipment.
Product specificaties
| Merk: | Daewoo |
| Categorie: | Betonbreker |
| Model: | DATMF16-2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Daewoo DATMF16-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Betonbreker Daewoo
14 Juli 2025
14 Juli 2025
5 Juli 2025
Handleiding Betonbreker
Nieuwste handleidingen voor Betonbreker
19 December 2024
28 Mei 2023
13 April 2023
1 Maart 2023
16 Februari 2023
13 Februari 2023
24 Januari 2023
16 Oktober 2022
24 Juni 2021