CyberPower CyberShield CS75A12V3 Handleiding

Bekijk gratis de handleiding van CyberPower CyberShield CS75A12V3 (6 pagina’s), behorend tot de categorie UPS. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over CyberPower CyberShield CS75A12V3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User’s Manual for

CyberShield

CS75A12V3

CyberShield UPSs are designed to provide a local power solution for

cable telephony, wireless local loop (WLL), and fiber to the home

(FTTH) broadband equipment.

IMPORTANT SAFETY WARNINGS

(SAVE THESE INSTRUCTIONS)

This manual contains important instructions regarding the installation and operation of this device.

Read this manual thoroughly before attempting to unpack , install or operate this device

CAUTION! The battery can energize hazardous live parts inside even when the AC input power is

disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity

controlled indoor area, free of conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! To reduce the risk of electric shock, do not remove the cover, except to service the

battery. No user serviceable parts inside, except for the battery.

CAUTION! To avoid electric shock, turn off the unit and unplug it from the AC power source before

servicing the battery or installing a computer component.

ENCLOSURE INSTALLATION

Carefully follow these instructions during installation of this device:

1.) Carry out the installation in a safe area that is free of excessive dust and has adequate airflow.

2.) Screws must be appropriate for total weight of the UPS and the mounting surface material.

3.) Do not operate the UPS where the temperature and humidity are outside the specified limits.

(Refer to specification in this manual.)

BATTERY REPLACEMENT

This battery is hot-swappable. As long as utility power is on , you may leave the UPS and connected

equipment on while replacing a new battery.

Once the battery is disconnected, the connected equipment is not protected from power

outages.

Deliver spent batteries to a recycling facility or ship to the manufacturer in the

replacement battery packing material.

WARNING INDICATOR

OPERATION

Connect: Equipment and Power

Step1. Plug the UPS power cord into the utility power cord inlet

Step2. Plug the UPS power cord into the wall outlet.

The UPS battery charges when it is connected to utility power. The battery charges

fully during the first of normal operation. Do not expect full battery run24 hours

capability during this initial charge period.

COLD START

The cold start feature is for applying power to the UPS and connected equipment when the UPS is

off and there is no utility power. Before using the cold start feature, please make sure the battery is

charged. To start the cold start feature, press the recessed cold start button with a small pointed

object.

UPS is on utility power.

UPS is on battery power.

DC output power is provided by the battery or

utility power.

The battery is not connected or the battery

needs to be replaced.

Green

Yellow

Green

Red

Indicator Color Condition

Step 1:

a. Remove the battery cover.

Step 2:

a. Unstrap strap from battery.

b. Slide battery off of the

shelf.

c. Disconnect battery cable

connector at chassis end.

Step 3:

a. Use the enclosed installation template to

mark an installation location for the unit.

b. Mount the unit on the wall with 2 mounting

screws into the keyhole slots.

c. Tighten the screws to secure the units.

d. Connect the battery connector and replace

the battery back.

CS75A12V3

CS75A12V3

Step 1:

a. Remove the battery cover.

Step 2:

a. Loosen the battery strap.

b. Disconnect battery cable connector

to remove battery.

c. Replace with new battery and

re-connect the battery connector.

Step 3:

a. Tighten the battery strip and

close the battery cover.

Front Panel

CS75A12V3

AC

OUTPUT

BATTERY

Note: please always mount the unit on the wall when it is working.

ACOUTPUT BATTERY

Product specificaties