Ctek MXS 10EC Handleiding

Ctek Acculader MXS 10EC

Bekijk gratis de handleiding van Ctek MXS 10EC (8 pagina’s), behorend tot de categorie Acculader. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Ctek MXS 10EC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
EN
EN • 3
MANUAL
SAFETY
•Thechargerisdesignedforchargingonlybat-
teriesaccordingtothetechnicalspecication.
Donotusethechargerforanyotherpurpose.
Alwaysfollowbatterymanufacturers'userand
safetyrecommendations.
•Nevertrytochargenon-rechargeablebatteries.
•Neverplacethechargerontopofthebattery
orcoverthechargerwhencharging.
•Neverchargeafrozenordamagedbattery.
•NeverchargeaLi-batterywithtemperature
below0°C(32°F)ifnotspeciedbythebattery
manufacturer.
•Neveruseachargerwithdamagedcables.
Ensurethatthecableshavenotbeendamaged
byhotsurfaces,sharpedgesorinanyother
way.
•Neverplaceafan-cooledchargersothatdust,
dirtorsimilarcanbesuckedintothefan.
•Adamagedcablemustbereplacedbya
CTEKrepresentativeusinganoriginalpart
suppliedbyCTEK.Adetachablecablecanbe
replacedbytheuserusinganoriginalpartsup-
pliedbyCTEK.
•Connectiontothemainssupplymustbein
accordancewiththenationalregulationsfor
electricalinstallations.
•Chargerswithgroundedmainsplugmustonly
beconnectedtoagroundedsocketoutlet.
•Duringcharging,Lead-Acidbatteriescould
emitexplosivegases.Preventsparkscloseto
thebattery.Provideforgoodventilation.
•ChargerswithIP-classlowerthanIPx4are
designedforindooruse.Seetechnicalspeci-
cation.Donotexposetorainorsnow.
•Connectthechargertothebattery´spositive
poleandthentothenegativepole.Forbatter-
iesmountedinsideavehicle,connectthenega-
CONGRATULATIONS
tothepurchaseofyournewprofessionalswitchmodebatterycharger.Thischargeris
includedinaseriesofprofessionalchargersfromCTEKSWEDENABandrepresentsthe
latesttechnologyinbatterycharging.
4 • EN
tiveconnectiontothevehiclechassisremote
fromthefuelpipe.Thenconnectthechargerto
mainssupply.
•Disconnectthechargerfromthemainssupply.
Nextremovethenegativeconnection(vehicle
chassis)andthenthepositiveconnection.
•Dontleaveanybatteryunattendedfora
longerperiodoftimeduringcharging.Ifany
erroroccursdisconnectthechargermanually.
•(IEC 7.12 ed.5)Thisapplianceisnot
intendedforusebypersons(includingchildren)
withreducedphysical,sensoryormentalcapa-
bilities,orlackofexperienceandknowledge,
unlesstheyhavebeengivensupervisionor
instructionconcerninguseoftheapplianceby
apersonresponsiblefortheirsafety.Children
shouldbesupervisedtoensurethattheydonot
playwiththeappliance.
(EN 7.12)Thisappliancecanbeusedby
childrenagedfrom8yearsandaboveand
personswithreducedphysical,sensoryor
mentalcapabilities,orlackofexperienceand
knowledgeiftheyhavebeengivensupervi-
sionorinstructionconcerninguseoftheappli-
anceinasafewayandunderstandthehazards
involved.Childrenshallnotplaywiththeappli-
ance.Cleaningandusermaintenanceshallnot
bemadebychildrenwithoutsupervision.
EN
EN • 5
NORMAL
BAT TERY
PROGRAM
ERROR LAMP
AGM
BAT TERY
PROGRAM
fULLY ChARGEdREAdY TO USE
RECONd
PROGRAM
SUPPLY
PROGRAM
POWER
LAMP
hOW TO ChARGE
1. Connectthechargertothebattery.
2. Connectthechargertothewallsocket.Thepowerlampwillindicatethatthemains
cableisconnectedtothewallsocket.Theerrorlampwillindicateifthebatteryclamps
areincorrectlyconnected.Thereversepolarityprotectionwillensurethatthebattery
orchargerwillnotbedamaged.
3. PresstheMODE-buttontoselectchargingprogram.
4. Followthe8-stepdisplaythroughthechargingprocess.
ThebatteryisreadytostarttheenginewhenSTEP4islit.
ThebatteryisfullychargedwhenSTEP7islit.
5. Stopchargingatanytimebydisconnectingthemainscablefromthewallsocket.
MOdE-
BUT TON
TEMPERATURE
SENSO R
INdICATOR


Product specificaties

Merk: Ctek
Categorie: Acculader
Model: MXS 10EC
Kleur van het product: Zwart, zilver
Ingebouwd display: Nee
Gewicht: 800 g
Breedte: 93 mm
Diepte: 197 mm
Hoogte: 49 mm
Internationale veiligheidscode (IP): IP64
LED-indicatoren: Charging,Y
Oplaadspanning: 12 V
Output current: 10 A
AC-ingangsspanning: 220 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Accucapaciteit (min): 20 Ah
Accucapaciteit (max): 300 Ah

Heb je hulp nodig?

Als je hulp nodig hebt met Ctek MXS 10EC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden