CRUX SWRCR-59D Handleiding
CRUX
Niet gecategoriseerd
SWRCR-59D
Bekijk gratis de handleiding van CRUX SWRCR-59D (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 57 mensen en kreeg gemiddeld 4.8 sterren uit 29 reviews. Heb je een vraag over CRUX SWRCR-59D of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.101320
SWRCR-59D
Radio Replacement with Steering Wheel Control Retention
for Select Dodge, Fiat, Jeep and RAM Vehicles
1 of 2
RAD IO RE PLAC EME NT
SWC RE TENT IO N
+
R
INTERFACING SOLUTIONS
- Retains factory features in select Dodge, Fiat, Jeep and RAM vehicles while functioning with an aftermarket radio.
- Retains Steering Wheel Controls via built-in, pre-programmed interface.
- Provides accessory power (2A Max).
- Retains factory backup camera.
- Retains factory Aux input in select vehicles.
- Retains factory analog amplier on select vehicles.
- Retains factory SWC phone button functionality in select vehicles.
- EIA color coded wiring for easy installation.
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SWRCR-59D Module SWRCR-59D Harness SWC Cables
AFTERMARKET
RADIO
+12V Constant Yellow
Ground Black
+12V ACC Red
Reverse Trigger Red/White
VSS (Vehicle Speed Sense) Purple/White
Right Front (+) Gray
Right Rear (+) Violet
To Retain Factory Aux Input Red/White RCA
To Retain Factory Backup Camera Yellow RCA 12-Pin
Connector
1 2 3
ON
4-Pin
Connector
Option A:
Option B:
Cap or insulate if
not being used
BLUE / YELLOW Insulate with tape
if not being used
3.5MM SWC CABLES (Option A or B)
Use the proper 3.5MM to 4-Pin cable for your radio.
Plug in the selected 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.
TO FACTORY
HARNESS
To the aftermarket
radio 3.5mm SWC
port or SWC wires
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.101320
2 of 2
RAD IO RE PLAC EME NT
SWC RE TENT IO N
+
R
INTERFACING SOLUTIONS
SWRCR-59D
Radio Replacement with Steering Wheel Control Retention
for Select Dodge, Fiat, Jeep and RAM Vehicles
DIP SWITCH SETTINGS:
Use the proper 3.5MM to 4-Pin SWC cable for the aermarket radio that is being used. Plug the 4-pin Molex connector
to the SWRCR-59D module and connect the 3.5mm plug or Blue/Yellow wire to the aermarket radio’s SWC input.
OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).
OPTION B is used for ATOTO, BOSS, BLAUPUNKT, DUAL, FARENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY,
SOUNDSTREAM and most o-brand units.
NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.
VEHICLE APPLICATIONS:
DODGE
2014-2015 Dart
2014-2015 Durango
FIAT
2014-2017 500L
2016-2017 500X
JEEP
2014-2015 Cherokee
2014-2015 Grand Cherokee
2015-2017 Renegade
2018 Renegade Sport / Upland (with base radio)
RAM
2013-2017 1500
2013-2017 2500
2013-2017 3500
2014-2015 ProMaster (with premium sound only)
NOTES:
Does NOT retain Beats Audio System.
Does NOT retain factory-installed Alpine system in Dodge vehicles.
For Fiat:
1) Will not retain backup sensor on Fiat vehicles (if equipped).
2) Once Factory radio is removed, the outside temperature will no longer be present on the cluster.
For RAM ProMaster:
1) Will not retain Phone and Voice buon.
RADIO BRAND: DIP#: 1 2 3
Atoto, Dual, Fahrenheit, Jensen
Pioneer, Power Acoustik, Soundstream
Blaupunkt, Most o-brand Radio
Alpine
Clarion
Kenwood
JVC
Boss, Old Sony
New Sony
OFF ON ON
OFF ON ON
OFF ON ON
OFF OFF OFF
ON ON OFF
ON ON ON
ON OFF ON
ON OFF OFF
OFF ON OFF
SWC MODULE
DIP SWITCH
1 2 3
ON
NOTE: For Atoto, Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most o-brand radios,
check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.
RED to SWC Key 1
WHITE to SWC Key 2
SHIELD to SWC Ground
For aermarket radios that have wires for SWC
connecons, cut o the 3.5mm plug on the Crux
SWC Cable (opon B) and connect the SWC wires
as follows:
Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | SWRCR-59D |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX SWRCR-59D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd CRUX
10 Maart 2025
10 Maart 2025
10 Maart 2025
10 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
Handleiding Niet gecategoriseerd
- Frigidaire
- Fellow
- Lavex
- Verizon
- Summit Audio
- Wonky Monkey
- Gold Note
- NEO Tools
- Corel
- On-Stage
- HK Audio
- Velux
- Verbatim
- ATen
- Simagic
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025