CRUX SWRAD-55 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor CRUX SWRAD-55 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 104 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
- Retains factory features in select Audi vehicles while functioning with an aftermarket radio.
- Supports amplified and non-amplified systems.
- EIA color coded wiring for easy installation.
- DOES NOT maintain Rotary Type Steering Wheel Controls (SWC).
SWRAD-55 Module
ISO Harness
Quadlock Harness
1 / 2
r .032017 ev
For Bose System:
Connect all 4 (front and rear) RCA connectors only. No speaker wire connections needed.
For Non-Amplified Systems:
Connect the 8 speaker wires. No RCA connection is needed.
For Vehicles with Rear Factory Subwoofer amplifier:
Connect the front channel speaker wires only. Then connect the rear RCA connectors.
Note: For Bose and Rear Factory Sub, connect the Blue wire.
SETTING THE AFTERMARKET RADIO BRAND
This step is done on the SWR - module. With the key in the off position, set the DIP switches to the AD 55
corresponding radio being used.
3.5MM SWC CABLE
Use the proper 3.5mm to 4-Pin SWC cable for the aftermarket radio you are using.
OPTION A is used for ALPINE, CLARION, (JVC and KENWOOD units will use the Blue/Yellow wire).
OPTION B is used for BOSS, DUAL, FAHRENHEIT, JENSEN, POWER ACOUSTIK, PIONEER, SONY and
SOUND STREAM units.
NOTE: Cap or insulate the 3.5mm plug or Blue/Yellow wire if not being used.
AUDI
2002 - 2010 A3
2001 - 2009 A4
2008 - 2010 A5
2002 - 2004 A6
2004 - 2009 S4
2009 - 2010 Q5
2002 - 2010 TT
2 / 2
r .032017 ev


Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: SWRAD-55

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX SWRAD-55 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd CRUX

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd