CRUX SWRBM-57K Handleiding

Bekijk gratis de handleiding van CRUX SWRBM-57K (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over CRUX SWRBM-57K of wil je andere gebruikers van dit product iets vragen? Stel een vraag

RADIO REPLACEMENT

R

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.042020

SWRBM-57K

Radio Replacement with SWC Retention for

Select BMW Vehicles with I/K-Line Bus (1991-2006)

1 of 2

PRODUCT FEATURES:

PARTS INCLUDED:

- Retains factory features in select BMW vehicles with I/K-Line Bus while funconing with an

aermarket radio.

- Does not support amplied systems with factory DSP.

- EIA color coded wiring for easy installaon.

SWRBM-57K MODULESWC Cable

40-Pin Quadlock Harness17-Pin Slide-Lock Harness

INSTALLATION DIAGRAM:

AFTERMARKET

RADIO

Illumination (+) Orange

Power Antenna/Amp Turn on Blue

+12V Constant Yellow

+12V ACC Red

Ground Black

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

TO FACTORY

HARNESS

12-Pin

Connector

OR Use the proper BM-57K harness

that corresponds to the OEM

harness in the vehicle

40-pin Quadlock

17-pin Slide-Lock

SWRBM-57K

MODULE

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

AFTERMARKET

RADIO SELECTOR

(See Chart)

BMW

SWC SETTING

(OFF OFF OFF OFF)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

Cap or insulate if

not being used

Kenwood/JVC (BLUE / YELLOW)Insulate with tape

if not being used

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

Product specificaties