CRUX HBRHD-61A Handleiding


Pagina's 2 Engels Niet gecategoriseerd

Bekijk de handleiding van CRUX HBRHD-61A gratis online of download de PDF. 20 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

RADIO REPLACEMENT
HANDLE BAR CONTROL
RETENTION
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022520
HBRHD-61A
Radio Replacement Interface with Handle Bar
1 of 2
PRODUCT FEATURES:
NOTE:
PARTS INCLUDED:
- Retains handle bar mounted radio controls (if equipped).
- Plug and Play. No wire cung to the OEM harness required.
- Siri Control and Android Control Voice Control funcon (if aermarket radio supports these features).
For 2 speaker systems only.
HBRHD-61A MODULEHBRHD-61A HarnessSWC Cable
INSTALLATION DIAGRAM:
AFTERMARKET
RADIO
+12V Constant Yellow
+12V ACC Red
Ground Black
Right Front (+) Gray
Right Front (-) Gray/Black
Le� Front (+) White
Le� Front (-) White/Black
TO FACTORY
HARNESS
14-Pin Black
Connector
23-Pin
Connector
1 2 3
ON
AFTERMARKET
RADIO SELECTOR
(See Chart)
HD-10
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW)
Insulate with tape
if not being used
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS” section.

Beoordeel deze handleiding


Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: HBRHD-61A

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX HBRHD-61A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden