CRUX SWRTY-61S Handleiding

Bekijk gratis de handleiding van CRUX SWRTY-61S (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 67 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over CRUX SWRTY-61S of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.020320

SWRTY-61S

Radio Replacement with Steering Wheel Retention for

Select Toyota Vehicles 2003 - Up

1 of 2

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- iPhone Voice Recognition (VR) feature from SWC on select radios.

- Supports BT-HF/A2DP/AVRCP prole on select aftermarket radio models.

- Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.

- Retains factory Aux Input.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRTY-61S MODULESWRTY-61S HARNESSSWC CABLE

AFTERMARKET

RADIO

SWRTY-61S SWC

MODULE

+12V Constant Yellow

+12V ACC Red

Ground Black

Illumination Orange

Amp Turn-On Blue/ White

Power Antenna Blue

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Audio Input Red/White RCA

(Retains Factory AUX Input

in Select 2007-Up Vehicles)

TO FACTORY

HARNESS

12-Pin Black

Connector

20 PIN

10 PIN

6 PIN

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

AFTERMARKET

RADIO SELECTOR

(See Chart)

TOYOTA

SWC SETTING

(OFF ON OFF ON)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

4-Pin

Connector

Cap or insulate if

not being used

Kenwood/JVC (BLUE / YELLOW)

Insulate with tape

if not being used

To aftermarket

radio SWC port

Product specificaties