Crivit IAN 68643 Handleiding

Crivit Pomp IAN 68643

Lees hieronder de 📖 handleiding in het Nederlandse voor Crivit IAN 68643 (13 pagina's) in de categorie Pomp. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
Floor Pump Instruction Manual 2
Jalkapumppu
Käyttöohje 6
Stående luftpump
Bruksanvisning 10
Gulvpumpe Betjeningsvejledning 14
Standluftpumpe Bedienungsanleitung 18
FI
SE
DK
GB IE
DE CHAT
modell & design
Artikelbezeichnung: BDA Stahl-Standluftpumpe lidl lb3
Marke: lidl, crivit
Datum: 11.08.11
Dateiname:
68643-GB-FI-SE-DK-DE-lb3.indd
Druckfarben:
schwarz
Verpackungsart: booklet
Format: A5
24 pages
Druckfreigabe erteilt
Datum:
Unterschrift:
modell & design
caspar-olevian-str.39
54295 trier
tel.: 0651-8200704
fax: 0651-8200705
email: info@modelldesign-trier.de
Floor Pump
Dated: 01.08.2011
Instruction Manual
Congratulations on your purchase of this high-quality Floor pump. For safety reasons we
request that you read through the instruction manual and the safety notes it contains as
carefully as possible and to save this, as it can always be helpful if you encounter any
problems with your air pump. The instruction manual is a set component of this product
and must be included if the product is passed on to any third party.
Storage instructions!
Please save the product information! The instruction manual is a set component of this
product and must be included if the product is passed on to any third party.
Intended use:
This Floor pump is suitable for inating all conventional bicycle tyres.
Other uses or modifications to the product are considered non-inten-
ded usage and can lead to risk of injury and damages. The distributor
bears no liability for damages resulting from non-intended usage. The
product is not intended for commercial use.
Warnings:
You can inflate all bicycle tyres up to the pump’s indicated maximum
tyre pressure (max. 8 bar / 116 PSI) or to the tyre manufacturer’s indi-
cated maximum tyre pressure. This can usually be found on the tyre
wall. The indicated maximum values may not be exceeded at any time.
Defective or damaged air pumps may no longer be used due to risk of
injury. Defective Floor pumps must be properly disposed of. Repairs are
not possible.
Due to the high operating force and the risks associated with this, the
product is not suited for use by children or persons with physical and/
or mental disabilities. Please note that the pump plunger and pump
cylinder become very hot over longer periods of pumping due to the
friction between them. For this reason, you should only grasp the pump
on the pump handle after pumping in order to avoid burns.
Due to the risk of injury, a defective or damaged Floor pump may never
be used.
Package contents:
1 x floor pump
1 x metal adapter for balls,
2 x plastic adapters for air mattresses, inflatable toys, etc.
Technical data:
Type: Floor Pump
Service Centre Nr: 63785/12 / IAN Nr. 68643
Nominal pressure: 6 bar / 87 PSI
Nominal excess pressure: 8 bar / 116 PSI
Pressure hose length: 64,5 cm
Production date: 2012
Warranty: 3 years
Distributor:
Monz GmbH & Co. KG
Bruchhausenstr. 20 - 54290 Trier / Germany
Service address:
Internationales Service Center
Schönbornstr. 14 - 54295 Trier / Germany
Tel. Nr.: 0049 (0) 651 436 6452
E-Mail: service@internationales-service-center.de
www.internationales-service-center.de
Cleaning & care instructions!
- clean with a damp cloth
- do not immerse in water
- Regularly inspect the floor pump’s screw joints fo
Maintenance:
The floor pump is maintenance-free.
Disposal:
The packaging is made of 100% environmentally-f
se of via your local recycling points. Please obtain
for the floor pump from your community or munici
Operation of the floor pump:
GB
IE
Place the floor pump
on a level and stable
surface.
During pumping,
please always position
yourself with both feet
on the foot plate of the
floor pump to ensure it
won’t fall over.
2
210 mm
148 mm 148 m
Operation of the dual head and adapters:
e.g. balls e.g. air mattresses e.g. inflatable boats
Inflating bicycle tyres with a Schrader valve:
First remove the dust protection cap (1). Insert the dual head with the large opening into
the valve (2). To lock in place, please fold up the lever of the dual head (3).
Inflating bicycle tyres with a Dunlop valve:
First remove the dust protection cap (1). Insert the dual head with the small opening into
the valve (2). To lock in place, please fold up the lever of the dual head (3).
Inflating bicycle tyres with a Presta valve:
First remove the dust protection cap (1). Detach t
head with the small opening into the valve (3). To
of the dual head (4).
Inflating air mattresses, inflatable boats, in
First open the valve plug (1). Select the appropriat
large opening of the dual head (2). To lock in place
head (3). Now insert the adapter into the object to
Inflating balls:
Insert the metal adapter in the large opening of th
fold up the lever of the dual head (2). Now insert t
For inflating bicycle tyres with a Schrader valve,
e.g. on automobiles, handcarts and trailers.
For inflating bicycle tyres with a Dunlop valve, e.g.
on city/trekking bikes.
For inflating bicycle tyres with a Presta valve, e.g.
on racing bicycles and mountain bikes.
(Valves not included)
To lock in place, please
fold up the lever of the
dual head.
1 2 3
1 2 3
dual head
12 3
1 2 43
1 43
2a
4


Product specificaties

Merk: Crivit
Categorie: Pomp
Model: IAN 68643

Heb je hulp nodig?

Als je hulp nodig hebt met Crivit IAN 68643 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Pomp Crivit

Handleiding Pomp

Nieuwste handleidingen voor Pomp