Crestron DIN-2MC2 Handleiding

Crestron Controller DIN-2MC2

Lees hieronder de 📖 handleiding in het Nederlandse voor Crestron DIN-2MC2 (32 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Crestron Green Light™

DIN-2MC2

DIN Rail Motor Control

Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

Regulatory Compliance

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

(1) This device may not cause harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada (IC) Compliance Statement

As of the date of manufacture, the DIN-2MC2 has been tested and found to comply with specifications for CE

marking and standards per EMC and Radiocommunications Compliance Labelling.

All brand names, product names and trademarks are the property of their respective owners.

Crestron DIN-2MC2 DIN Rail Motor Control

Contents

DIN Rail Motor Control: DIN-2MC2 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Applications.................................................................................................................3

Specifications ..............................................................................................................4

Physical Description....................................................................................................5

Setup .......................................................................................................................................... 9

Network Wiring...........................................................................................................9

Identity Code ............................................................................................................... 9

Installation ................................................................................................................. 10

Hardware Hookup .....................................................................................................12

Programming Software............................................................................................................ 14

Earliest Version Software Requirements for the PC ................................................. 14

Programming with Crestron SystemBuilder.............................................................. 14

Programming with D3 Pro.........................................................................................15

Programming with SIMPL Windows ........................................................................ 15

Example Program...................................................................................................... 17

Uploading and Upgrading........................................................................................................18

Establishing Communication.....................................................................................18

Programs and Firmware ............................................................................................19

Program Checks ........................................................................................................ 19

Operation .................................................................................................................................20

Problem Solving ...................................................................................................................... 22

Troubleshooting......................................................................................................... 22

Check Network Wiring..............................................................................................23

Reference Documents................................................................................................ 25

Further Inquiries ........................................................................................................25

Future Updates ..........................................................................................................25

Return and Warranty Policies .................................................................................................. 26

Merchandise Returns / Repair Service ...................................................................... 26

CRESTRON Limited Warranty.................................................................................26

Operations & Installation Guide – DOC. 6665B Contents •

•

•• i

Product specificaties

Merk:	Crestron
Categorie:	Controller
Model:	DIN-2MC2
Gewicht:	210 g
Breedte:	106 mm
Diepte:	59.5 mm
Hoogte:	94.2 mm
Soort:	Bi-directionele motorregelaar
LED-indicatoren:	NET, NET ID, Open & close, Override, Power, Reset, Setup
Certificering:	CE
Netvoeding:	3 W
Warmtedissipatie:	10 BTU/h
AC-ingangsspanning:	120 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Maximaal motorvermogen:	1 hp
Installatieopties:	DIN-rail-installatie
AWG-draadafmeting (max):	12
NET-aansluitblok:	2x 4-pin 3.5mm
Motorbesturingskanalen:	2 kanalen
Relaisklemmenblok:	1x 8-pin 3.5mm
Voedings-/overbruggingsklemmenblok:	2x 2-pin 3.5mm