Crestron CEN-CI3-1-POE Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Crestron CEN-CI3-1-POE (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
CEN-CI3-1
3-SeriesÂŽ Card Interface - 1 Slot
Installation Guide
Description
The CrestronÂŽ CEN-CI3-1 is a compact,
rack-mountable enclosure designed to provide a
versatile control interface and expansion solution using
any single 3-SeriesÂŽ Control Card. It is used to expand
the control ports of a 3-Series Control System
ÂŽ.
Installation
The CEN-CI3-1 is designed to be placed on a shelf or
rack mounted using the optional ST-RMK Rack Mount
Kit (sold separately).
Mounting into a Rack
For rack mounting, use the 04-40 x 1/4” screws that
come with the ST-RMK to secure one or two
CEN-CI3-1 units to the ST-RMK.
Additional Resources
Visit the product page on the
Crestron website
(www.crestron.com) for additional
information and the latest rmware
updates.
Holes for Mounting to
ST-RMK Rack Mount Kit
CAUTION: The CEN-CI3-1 should be used in a
well-ventilated area. The venting holes on the sides
should not be obstructed.
Mounting onto a Flat Surface
When placing the CEN-CI3-1 onto a at surface or
stacking it with other equipment, attach the included
feet near the corners on the underside of the
CEN-CI3-1.
Communicating with the Control Card
A 3-Series Control Card must be installed in the
CEN-CI3-1 because communication is with the installed
card and not with the CEN-CI3-1 itself.
Communication can be via TCP/IP or USB.
CEN-CI3-1
CEN-CI3-1
ST-RMK
Crestron Electronics, Inc. Installation Guide
15 Volvo Drive DOC. 7794A
Rockleigh, NJ 07647 (2043974)
Tel: 888.CRESTRON 05.15
Fax: 201.767.7576 Specications subject to
www.crestron.com change without notice.
As of the date of manufacture, the CEN-CI3-1 has been
tested and found to comply with specications for CE
marking.
This product is Listed to applicable UL Standards and
requirements by Underwriters Laboratories Inc.
Federal Communications Commission (FCC) Compliance
Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
CAUTION: Changes or modications not expressly
approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV
technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)
The product warranty can be found at
www.crestron.com/warranty.
The specic patents that cover Crestron products are listed at
patents.crestron.com.
Crestron, the Crestron logo, 3-Series, and 3-Series Control
System are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other
countries. UL and the UL logo are either trademarks or
registered trademarks of Underwriters Laboratories, Inc. in
the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks
and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or
photography.
This document was written by the Technical Publications
department at Crestron.
Š2015 Crestron Electronics, Inc.


Product specificaties

Merk: Crestron
Categorie: Niet gecategoriseerd
Model: CEN-CI3-1-POE

Heb je hulp nodig?

Als je hulp nodig hebt met Crestron CEN-CI3-1-POE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Crestron

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd