Craftsman CMXZRAZF668 Handleiding

Craftsman Radio CMXZRAZF668

Lees hieronder de 📖 handleiding in het Nederlandse voor Craftsman CMXZRAZF668 (2 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Set DCS Privacy Codes

:To select a DCS privacy code

1. Mode/Power After selecting a channel, press the button

until the icon appears and the small numbers flash on DCS

the display (00 through 83).

2. Channel Up Channel Down Press using the or button to select a DCS privacy

code. You can hold the or button for fast advance.Up Down

3. When DCS privacy code is displayed, choose one of the following:

a. Press the button to enter the new setting and proceed to other Mode/Power

functions.

b. Press the or button to return to mode.Talk Call Standby

c. Do not press any buttons for 6 seconds to return to mode.Standby

Set CTCSS Privacy Codes

:To select a CTCSS privacy code

After selecting a channel, press the button 1. Mode/Power

until the icon appears and the small numbers next to CTCSS

the channel number flash on the display.

2. Channel Up Channel Down Press using the or button to select a privacy code.

You can hold the or button for fast advance.Up Down

3. When your desired CTCSS privacy code is displayed, choose one of the following:

a. Press the button to enter the new setting and proceed to other Mode/Power

functions.

b. Press the or button to return to mode.Talk Call Standby

c. Do not press any buttons for 6 seconds to return to mode.Standby

To Adjust Volume

Press the or button.Volume Up Volume Down

A double beep sound is used to indicate the minimum and

maximum volume levels (1 through 8).

Call Button

Press and release the button. Call

The other person will hear a three second call tone. This tone is

used only to establish voice communications.

LED/S.O.S. Flashlight

Press and release the button below the LED flashlight Talk

button to use the LED flashlight located at the bottom of the

radio.

To activate S.O.S. function, press and hold the LED flashlight

button to turn on. Press and release to turn off the flashlight or

S.O.S. function.

Auto Squelch/Maximum Range

Your radio will automatically shut off weak transmissions and unwanted noise due to

terrain, conditions or if you’ve reached your limit.Maximum Range

You can temporarily turn off auto squelch or turn on maximum range extender, allowing

all signals to be received and extending the maximum range of your radio.

To temporarily turn off auto squelch/ To turn

maximum range extender on:

– Press and hold the button. Max Range Hi/Lo

:To turn maximum range extender off

– Press and hold the button or change Max Range Hi/Lo

channel.

Battery Low

When battery power is low, the final bar in the

Battery Low icon will blink and an audible tone will sound

twice before the radio shuts off. Your batteries should be

replaced or recharged, if using rechargeable batteries.

Auto Battery Save

If there are no transmissions within 10 seconds, the

radio will automatically switch to mode and the Battery Save

Power Saver icon will flash in the display.

This will not affect the radio’s ability to receive incoming

transmissions.

Communicating with Another Person

Press and hold the button.1. Talk

With the microphone about two inches (5 cm) from your 2.

mouth, speak in a normal voice.

Release the button when you are finished talking and 3. Talk

listen for a response.

You cannot receive incoming calls while pressing the

Talk button.

To Select a Channel

With the radio on, select any of the 22 channels by

pressing the or button. Channel Up Channel Down

Listening for a Response

Release the button to receive incoming transmissions. Talk

Your radio is always in mode while the or Standby Talk Call

buttons are not pressed.

Caring for Your Radio

Your radio will give you years of trouble-free service if cared for properly. Handle the

radio gently. Keep the radio away from dust. Never put the radio in water or in a damp

place. Avoid exposure to extreme temperatures.

Installing Batteries

To install or replace batteries:

1. Remove belt clip by releasing belt clip latch and sliding clip up.

2. Using a flat head screw driver or edge of a coin (a quarter may

be used), remove the screw securing the back battery

compartment cover.

3. Insert the supplied three AA rechargeable batteries or

non-rechargeable alkaline batteries. Position batteries

according to polarity markings.

4. Replace battery compartment cover screw and belt clip.

To charge batteries in radio:

1. Check to see that the batteries have been inserted properly.

2. Insert the cable into the charge jack located at the top of the

radio.

3. Plug the cable into USB-compatible power port.

Use only the supplied rechargeable batteries and charger for recharging your Craftsman

radio.

Craftsman recommends your radio is turned off while being charged.

Non-rechargeable alkaline batteries can also be used in your radio.

Lock Function

The Lock Channel Up, Channel function locks the

Down, Volume Up, Volume Down Mode/Power and

buttons to prevent accidental operation.

To turn the lock on or off:

– Press and hold the button for two seconds.Weather/Lock

A double beep sound is used to confirm your lock on or off

request. When in mode, the icon will be displayed.Lock Lock

Range

Your range will vary depending on terrain and conditions.

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the

range of the radio.

Dense foliage and hilly terrain will further reduce the range of

the radio.

On Channels 8 through 14, your radio automatically switches to

low power, which will limit the range the radio can

communicate.

Insert Batteries

Introduction

Product Features

Operation

Using Your Radio

Backlit LCD Display

Features

• 22 Channels

• 10 Channel Weather

Radio

• Weather Alert

• 121 Privacy Codes

(38 CTCSS codes/

83 DCS codes)

• IP54 Dustproof and

Waterproof

• Hands-Free Operation

(VOX)

• Scan

Channels, privacy codes

• Backlit LCD Display

• LED Flashlight

• Call Alert

Ten selectable tones

• Button Lock

• Speaker/

Microphone/

Charge Jack

• Roger Beep

Selectable On/Off

• Battery/Power Saver

• Keystroke Tones

• Battery Level

Indicator

• Low Battery Audible

Alert

• Auto Squelch

• Maximum Range

Extender

• Belt Clip

A-1 A-2 A-3 1 2

Remove Belt Clip

3 4 5 6 7 8

Battery Low

Two Inches (5 cm)

from Mouth

Remember, you can achieve maximum range by

using maximum range extender. See page 5 for

details.

Set CTCSS Privacy Codes

Set DCS Privacy Codes

Set Vox On/Off

Set Vox Sensitivity

Set Call Tones 1-10

Set Vibra Alert On/Off

Set Roger Beep On/Off

Set Key Tones On/Off

Mode Functions (continued on back side)

Maximum range may vary and is based on

unobstructed line-of-sight communication

under ideal conditions.

23 4 5

Turning on Your Radio

Press and hold the button until you hear a series Mode/Power

of audible tones indicating the radio is on.

Your radio is now in mode, ready to receive Standby

transmissions. The radio is always in mode except Standby

when the or buttons are pressed.Talk, Call Mode/Power

Battery Status Indicator

The battery charge status is shown on the display. Four bars

indicates fully charged.

Quick Start

1. Mode/Power on Press and hold the button to turn your radio.

2. Channel Up Channel Down Press the or button to select a channel.

3. Talk Press and hold the button while speaking into the microphone.

4. Talk When finished talking, release the button and listen for a response.

Both radios must be tuned to the same

channel/privacy code to communicate.

For charging radio(s) in desktop charger:

1. Insert radio(s) into desktop charger as shown.

2. Insert the micro-USB cable into jack on back of charger.

3. Plug the cable into USB-compatible power port.

For pluggable equipment, the socket-outlet shall be installed

near the equipment and shall be easily accessible.

If charging light is not on, check position of radio. Radio should be upright. The charge

indicator light will stay on as long as the radio is in the charging well, and the light will

go off when the charging is complete.

Note : To charge a single radio, you can bypass the desktop charger and simply insert

the micro-USB’s connector directly into the charge jack located on the top of the radio.

The radio will display flashing battery icon while charging.

Craftsman recommends your radio be turned off while being charged.

Non-rechargeable alkaline batteries can also be used in your radio.

Mode/Power

Channel Button

Mode/Power

Channel Button

Max Range Button

Volume Button

Call Button

Lock Button

Battery Save Mode

Talk Button

LED/S.O.S. Flashlight

Channel Number

Listening

Volume Level Lock Icon

Reduced Range

Maximum Range

Operation

Mode Functions

Privacy Code

DCS Privacy Code

CMXZRAZF668

TWO-WAY RADIO MODEL

User guide

Printed in China

Part No. KEM-ML43700

English

Introduction

Making Life Easier

Staying in touch with your family and friends is convenient and easy when

using your radio. Some of the many uses you will discover include:

Communicating with others while hiking, biking, and working; keeping track of family and

friends at a crowded public event; checking with travel

companions in another car; talking with neighbors; arranging

meeting spots with others while shopping at the mall.

Secure your radio while on the go.

Carrying your radio with you is easy when using the belt clip or

optional wrist strap.

The belt clip easily attaches to your belt, purse, or backpack.

Belt Clip

WARNING Important Safety Instructions for Battery

Read All Instructions

• Do not incinerate the battery even if it is severely damaged or is completely worn out. The battery pack

can explode in a fire.

• A small leakage of liquid from the battery cells may occur under extreme usage or temperature

conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on

your skin:

a. Wash quickly with soap and water.

b. Neutralize with a mild acid such as lemon juice or vinegar.

c. If battery liquid gets into your eyes, flush them with clean water for a minimum of 10 minutes and seek

immediate medical attention. (Medical note: The liquid is 15-40% solution of Nickel hydroxide.)

Recycle Battery

This product uses Nickel Metal Hydride batteries.

Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste

authority for information regarding available recycling and/or disposal options.

1. Only accessories included in this package or specified by the manufacturer should be used with the

radio. The 5V micro-USB charging input is compatible with most high quality micro-USB chargers that

fully conform to the USB standards.

2. Do not use cleaners or solvents to clean the exterior of the radio. Use only a damp or dry cloth.

3. Do not expose this product to splashing or dripping water.

4. Do not attempt to service the receiver yourself. Removing the cover will void the warranty. Changes

or modifications not expressly approved by Craftsman may void the user’s authority granted by the

FCC to operate this device and should not be made.

WARNING Important Safety Instructions:

Before operating the radio, please read all safety and operating

instructions. Save all instructions in a safe place for future reference.

1. Antenna

2. Button Memory/Escape

3. ButtonTalk

4. ButtonLED Flashlight

5. ButtonsVolume Up/Down

6. ButtonCall

7. LED Flashlight

8. Rubberized Grips

9. Speaker/Microphone

10. ButtonMode/Power

11. ButtonWeather/Lock

12. ButtonsChannel Up/Down

13. Backlit LCD Display

14. ButtonScan

15. ButtonMax Range Hi/Lo

16. External Speaker/ Microphone/

USB Charge Jack

17. Belt Clip

18. Wrist Strap Connection

19. Battery Compartment

20. Battery Door Screw

Radio Charger Jack

Battery Charge

Status

Scrolling Through the Mode Function

By scrolling through the function, you will be able to select or turn on preferred Mode

features of your radio. When scrolling through the function, your radio features Mode

will be displayed in the same predetermined order:

Privacy Codes

Your radio incorporates two advanced coded squelch systems that can help to reduce

interference from other users on any given channel. CTCSS (Continuous Tone Coded

Squelch System) provides 38 privacy codes and DCS (Digitally Coded Squelch) provides

83 privacy codes. This provides a total of 121 . Either system can be Privacy Codes

used on all channels, but both systems cannot be used on the same channel at the same

time.

If DCS is turned on at the channel selected, the display

will flash the CTCSS icon and “OFF.” To switch from

DCS to CTCSS, press the or Channel Up Channel

Down button while the display is flashing “OFF.” The

display will then show the small numbers flashing and

you will then be able to proceed to step 2.

If CTCSS is turned on at the channel selected, the

display will flash the DCS icon and “OFF.” To

switch from CTCSS to DCS, press the Channel Up

or button while the display is Channel Down

flashing “OFF.” The display will then show the

small numbers flashing and you will then be able

to proceed to step 2.

1. Battery Level Indicator

2. Roger Beep Icon

3. VOX Icon

4. Weather Icon

5. Lock Icon

6. Weather Alert Icon

7. Key Tone Icon

8. DCS/CTCSS Icons

9. Scan/Memory Icon

10. Memory Channel Number

11. DCS/CTCSS Privacy Code Numbers

12. Power Saver Icon

13. Vibra Alert/ Call Alert Icon

14. Channel Numbers

15. Receive/Transmit Icon

16. Hi/Low Power Icon

Both radios must be tuned to the same channel /

privacy code to communicate.

WARNING

• Do not attempt to charge alkaline batteries.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or

rechargeable (Ni-Cd, Ni-MH, etc.) batteries.

Remove Screw

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you

to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice which, if not not related to personal injury

avoided, result in property damage.may

WARNING Read all safety warnings and all instructions. :

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

WARNING : Never modify the product or any part of it. Damage or

personal injury could result.

WARNING: To reduce the risk of injury, read the user guide.

If you have any questions or comments about this or any

product, call CRAFTSMAN® toll free at 1-888-331-4569.

To successfully communicate using a privacy code, both the sending

and receiving radios must be tuned to the same channel and to the

same privacy code system (CTCSS or DCS) and privacy code number.

Each channel will remember the last privacy code system and number

you select.

The privacy code 00 is not a privacy code, but allows all signals to be

heard on a channel that is set to 00 on both the CTCSS and DCS systems.

See page 12 on how to select between ten call

tone settings.

See for frequency allocations charts.page 17

Both radios must be tuned to the same channel to

communicate.

The radio will display flashing battery icon while

charging if the radio is on.

Memory Scan continued

During scanning (while receiving an incoming transmission), you can

choose from the following:

a. Talk Call Memory Standby Press or button to enter the new setting and return to

mode.

b. Memory Scan Do not press any buttons and return to mode after an incoming

transmission finished.

c. Scan Memory Standby Press and hold button to return to mode.

Privacy Code Scan

Your radio can automatically scan the (either CTCSS 01 through 38 or Privacy Codes

DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS)

can be scanned at a time.

To scan privacy codes:

While in , press and release the button 1. Standby mode Scan

twice (CTCSS) or three times (DCS)until the CTCSS or DCS icon

and numbers are flashing.

Press and hold the button to begin scanning privacy 2. Scan

codes within the selected channel.

The Scan icon will continue to be displayed when privacy code

scan is on. Your radio will continue to scan privacy codes and

stop as an incoming transmission is detected. Your radio will

remain on that channel/privacy code for 5 seconds.

During scanning (while receiving an incoming

transmission), you can choose from the following:

a. Press or button to enter the new setting and return Talk Call

to mode. Standby

b. Do not press any buttons and return to mode after an Scan

incoming transmission finished.

c. Press and hold button to return to mode.Scan Standby

9. Choose one of the following:

a. Press the button to enter the channel/privacy code in the selected MEM/ESC

memory location. Radio then proceeds to next memory location, which will blink.

b. Press the button to save the current state of the Set Memory Function MEM/ESC

and press and hold the button again return to Standby mode.MEM/ESC

To recall a stored memory channel location

1. MEM/ESC Memory Press the button until the icon and the

memory location number flash on the display.

2. Channel Up Channel Down Press the or button to select a

memory location (0 through 9).

3. MEM/ESC Standby Press and hold the button to return to

mode on the selected memory location.

NOAA* All Hazards Radio Channels

You can use your radio to listen to channels transmitting in NOAA All Hazards Radio

your area.

To listen to All Hazards Radio channels:

Press the button once until the 1. Weather All Hazards

Radio icon and the currently selected All Hazards Radio

channel are displayed.

Use the or button to change 2. Channel Up Channel Down

All Hazards Radio channels.

The icon will continue to be displayed 3. All Hazards Radio

when is on. All Hazards Radio

To exit , press and hold the 4. All Hazards Radio Weather

button until On or Off is displayed.

*National Oceanographic and Atmospheric Administration

Weather (WX) Alert Mode

Turning On the Weather Alert function will allow your radio to automatically receive

NOAA weather signals and warnings from designated weather broadcast stations. If the

radio is turned ON, it will alert to Weather and other emergency alerts broadcast by

NOAA.

To turn Weather Alert On or Off:

Press the button twice until the 1. Weather Weather Alert

icon flashes on the display. The current On or Off setting is

displayed.

Press the and button to turn 2. Channel Up Channel Down

Weather Alert On or Off.

Press and hold the button again to save the new 3. Weather

setting and exit the Mode and return to Weather Alert

Standby mode.

Channel Scan

Your radio can automatically scan channels.

To scan channels:

Press and release the button until the icon and 1. Scan Scan

the channel numbers appear on the display.

Press and hold the button to begin scanning channels. 2. Scan

The Scan icon will continue to be displayed when scan is on.

Your radio will continue to scan all channels and stop if an

incoming transmission is detected. Your radio will remain on

that channel for 5 seconds.

During scanning (while receiving an incoming transmission),

you can choose from the following:

a. Talk Call Standby Press or button to enter the new setting and return to mode.

b. Scan Do not press any buttons and return to mode after an incoming transmission

finished.

c. Scan Standby Press and hold button to return to mode.

Memory Scan

Your radio can automatically scan memory channels.

To scan Memory channels:

Press and release the button while you are on 1. Scan

Memory Standby Scan Memmode until the starts

flashing.

Press either or to begin 2. Channel Up Channel Down

scanning memory channels.

The Scan Mem will continue to be displayed when scan is on.

Your radio will continue to scan all memory channels and stop if

an incoming transmission is detected. Your radio will remain on

the channel for 5 seconds.

Roger Beep Confirmation Tone

Your listener will hear an audible tone when you release the button. This alerts the Talk

other party that you have finished talking and it is OK for them to speak.

To turn roger beep on or off:

Press the button until the icon 1. Mode/Power Roger Beep

flashes. The current on or off setting is displayed.

Press the or button to select 2. Channel Up Channel Down

roger beep on or off.

Choose one of the following:3.

Press the button to enter the new setting a. Mode/Power

and proceed to other functions.

Press or button to return to mode. b. Talk Call Standby

Do not press any buttons for 6 seconds to return to c.

Standby mode.

Key Tone On/Off

When is On, an audible tone will sound each time a button is pressed.Key Tone

To turn key tone on or off:

Press the button until the icon 1. Mode/Power Key Tone

flashes. The current key tone status On/Off will flash.

Press the or button to select 2. Channel Up Channel Down

key tone on or off.

Choose one of the following:3.

Press the button to enter the a. Mode/Power Standby

mode.

Press or button to return to mode. b. Talk Call Standby

Do not press any buttons for 6 seconds to c.

return to mode.Standby

Ten Call Tone Settings

You can choose between ten different

Call Tone Settings to transmit a call alert.

To change a call tone setting:

Press the button until the letter “C” and the 1. Mode/Power

current call tone number (01 through 10) is displayed. The

current call tone will sound for three seconds.

Press the or button to hear 2. Channel Up Channel Down

the other call tone settings.

Choose one of the following:3.

Press the button to enter the new setting a. Mode/Power

and proceed to other functions.

Press or button to return to mode. b. Talk Call Standby

Do not press any buttons for 6 seconds to return to c.

Standby mode.

Vibra Alert and Call Alert

Your radio can alert you to incoming signals by sounding an audible call tone or an

audible tone with Vibra Alert.

:To change call settings

Press the button until the icon flashes on 1. Mode Call Setting

the display. The current setting (“01” vibrate + ring, “02” ring

only) is displayed.

Press the or button to change 2. Channel Up Channel Down

the call setting.

Choose one of the following:3.

Press the button to enter the new setting and a. Mode

proceed to other functions.

Press or button to return to mode. b. Talk Call Standby

Do not press any buttons for 6 seconds to return to c.

Standby mode.

10 Memory Location

Your radio has for storing your most frequently used channels 10 Memory Locations

and channel/privacy code combinations.

These can be selected individually or can be scanned. Memory Locations

(See page 14 for memory location scan.)

To program a memory location:

Press the button. icon and the 1. MEM/ESC Memory Memory

Location show on the display.

Press the or button to select 2. Channel Up Channel Down

the memory location (0 through 9).

Press the button to enter a new memory location 3. MEM/ESC

or edit an already programmed memory location.

Press the or button to select 4. Channel Up Channel Down

the memory location.

Press the button. The channel numbers will flash 5. MEM/ESC

on the display.

Press the or button to select a 6. Channel Up Channel Down

channel (1 through 22).

Press the button. The icon and privacy 7. MEM/ESC CTCSS

code numbers will flash on the display.

Choose one of the following:8.

Press the or button to select a. Channel Up Channel Down

a CTCSS privacy code (00 through 38) for the channel.

Press the button to switch from CTCSS to DCS. b. MEM/ESC

The DCS icon and privacy code numbers will flash on the

display. The or button can Channel Up Channel Down

then be used to select a DCS privacy code (00 through 83)

for the channel.

Voice Activated Transmit (VOX)

In mode, your radio can be used “hands-free,” automatically transmitting when VOX

you speak. You can set the sensitivity level to fit the volume of your voice and avoid VOX

transmissions triggered by background noise.

:To turn VOX mode on or off

Press the button until the icon flashes on 1. Mode/Power VOX

the display. The current On or Off setting is displayed.

Press the or button to turn VOX 2. Channel Up Channel Down

On or Off.

Choose one of the following:3.

Press the button to enter the new setting a. Mode/Power

and proceed to other functions.

Press the or button to return to mode. b. Talk Call Standby

To set VOX sensitivity:

1. Press the button until the icon flashes Mode/Power VOX

and the current sensitivity level is displayed.

2. Press the or button to change Channel Up Channel Down

the setting.

3. Choose one of the following:

Press the button to enter the new setting a. Mode/Power

and proceed to other functions.

Press the or button to return to mode.b. Talk Call Standby

c. Do not press any buttons for 6 seconds to return to

Standby mode.

Mode/Power

Channel Button

Mode/Power

Channel Button

Mode/Power

Channel Button

Mode/Power

Channel Button

Mode/Power

Channel Button

10 11 12 13 14

15 16 17 18 19 20

MEM/ESC Button

Scan Button

Weather Button

VOX Icon

VOX Sensitivity Level

Memory Location

Operation

Mode Functions (continued)

Call Tone Setting

Call Tone On/

Vibrate On

Call Tone On/

Vibrate Off

Roger Beep Off

Key Tone Icon

Select Channel

Weather Alert Icon

Scan Privacy Codes

Scan Channels

Channel Button

Scan Button

Hazards Radio Icon

This feature is set to OFF by default.

Make sure the strongest Weather channel is

selected for your area using the NOAA All Hazards

Radio Channels selection in the previous menu.

Warranty

Limited One-Year Warranty

Craftsman warrants to the original consumer purchaser only that this product and the component parts

thereof, will be free from defects in workmanship and materials for a period of one year from the date of

first consumer purchase. During this period, we will, repair or replace, at its sole option and discretion, this

product or any defective parts. Our liability hereunder shall be limited to repair or replacement of the

defective part or parts, and such correction shall constitute a fulfillment of all warranties hereunder.

This limited warranty is only valid for the original consumer purchaser in limited jurisdictions and is not

transferrable. This limited warranty will automatically terminate prior to expiration if this product is sold

or otherwise transferred to another party. The product must be purchased from Craftsman or an authorized

dealer or the warranty is void. This limited warranty is valid only for products purchased and utilized in

specific jurisdictions. Please visit our website at for a list of jurisdictions wherein CRAFTSMAN.com

this limited warranty is valid.

This limited warranty does not cover damage due to misuse, abuse, negligence, acts of God, accident,

commercial use or modification of, or to any part of this product. This warranty does not cover damage

due to improper operation, maintenance or installation; ordinary wear and tear; or attempted alterations or

repairs by anyone other than Craftsman or someone authorized by us to do warranty work. Any

unauthorized alterations or repairs will void this warranty. This limited warranty does not cover product

sold AS IS or WITH ALL FAULTS. This limited warranty is invalid if the factory applied serial number or date

stamp has been altered, defaced or removed from this product. This limited warranty does not cover

product purchased or utilized in a jurisdiction not covered.

The procedure for obtaining service and support, and the applicability of this warranty, will vary depending

on the country or jurisdiction in which you purchase and utilize the product. For details on obtaining

product service, support and other warranty information please visit .CRAFTSMAN.com

This warranty gives you specific legal rights, and you may also have other rights which vary from state to

state and country to country.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, WE MAKES NO OTHER WARRANTIES, EXPRESSED OR

IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. WE EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY

IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED

WARRANTY.

LIMITATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS

THE EXCLUSIVE REMEDY OF THE CONSUMER. CRAFTSMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION,

FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. CRAFTSMAN IS NOT LIABLE FOR ANY

DAMAGES CAUSED BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS, LOST

SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES. CRAFTSMAN IS NOT LIABLE FOR ANY CLAIM

MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY. THIS LIMITATION APPLIES WHETHER DAMAGES

ARE SOUGHT, OR A CLAIM MADE, UNDER THIS WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE OR

STRICT PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITATION CANNOT BE WAIVED

OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILITY WILL BE EFFECTIVE EVEN IF CRAFTSMAN OR AN

AUTHORIZED REPRESENTATIVE OF CRAFTSMAN HAS BEEN ADVISED BY YOU OF THE POSSIBILITY OF ANY SUCH

DAMAGES.

Some states and countries do not allow limitations on how long an implied warranty lasts and do not allow

the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply

to you. This warranty gives you specific legal rights, and you may also have other rights which vary from

state to state and country to country

Provided that the product was purchased from us or through its authorized reseller or agent and utilized in

the U.S.A., We will, without charge, repair or replace, at its option, defective products, products or

component parts upon delivery to the authorized Craftsman Authorized Service Center, accompanied by

proof of the date of first customer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service, but the return

charges, to an address in the U.S.A, will be at our expense, if the product is under warranty.

For Products Purchased Outside the U.S.A.

Please contact your authorized local reseller or agent for warranty information.

Operation

General Specifications

Frequency Allocation

A = Channel No. for 22 Channel

B = Frequency in MHz

C = Power Output

A B C

1 462.5625 High

2 462.5875 High

3 462.6125 High

4 462.6375 High

5 462.6625 High

6 462.6875 High

7 462.7125 High

8 467.5625 Low

9 467.5875 Low

10 467.6125 Low

11 467.6375 Low

12 467.6625 Low

13 467.6875 Low

14 467.7125 Low

15 462.5500 High

16 462.5750 High

17 462.6000 High

18 462.6250 High

19 462.6500 High

20 462.6750 High

21 462.7000 High

22 462.7250 High

IMPORTANT NOTICE:

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) this device must accept any interference

received,including interference that may cause undesired operation.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Safety Information for Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is

pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to

exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure

guidelines with safety levels for handheld wireless devices

Important

FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF

exposure guidelines when used with Craftsman accessories supplied or designated for this product. Use of

other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied

antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may

violate FCC regulations.

Normal Position

Hold the transmitter approximately 2 inches from your face and speak in a normal voice, with the antenna

pointed up and away.

FCC Part 15.21 Warning Statement-

NOTE THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED

BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

IC RSS-GEN

This device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Under ISED regulations, this radio transmitter may only operate using an antenna of a type and maximum

(or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users,

the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)

is not more than that necessary for successful communication.

The applicant is responsible for providing proper instructions to the user of the radio device, and any usage

restrictions, including limits of exposure durations. The user manual shall provide installation and

operation instructions, as well as any special usage conditions, to ensure compliance with SAR and/or RF

field strength limits. For instance, compliance distance shall be clearly stated in the user manual.

Radiation Exposure Statement:

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

For Remote controller, SAR tests are conducted using standard operating positions accepted by the

FCC/ISED with the device transmitting at its highest certified power level in all tested frequency bands,

although the SAR is determined at the highest certified power level, the actual SAR level of the device while

operating can be well below the maximum value.

Before a new model device is a available for sale to the public, it must be tested and certified to the FCC

that it does not exceed the exposure limit established by the FCC/ISED, Tests for each device are

performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC/ISED.

For body worn operation, this model device has been tested and meets the FCC/ISED RF exposure

guidelines when used with an accessory designated for this product or when used with an accessory that

Contains no metal and that positions the handset a minimum of 10 mm from the body.

Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

For any questions about operating this new Craftsman branded product, PLEASE CONTACT US FIRST… do not

return this product to the retail store. The contact information for support will vary depending on the

country in which you purchased and utilize the product.

To obtain warranty service or other information for products purchased from us or through its authorized

reseller or agent and utilized in the U.S.A., please call our consumer support line at , or (888) 331-4569

email us at . You will receive instructions on how to ship the products at your expense CRAFTSMAN.com

to an our Authorized Service Center. To obtain service, you must include: (a) a copy of your receipt, bill of

sale or other comparable proof of purchase; (b) a written description of the problem; and, most

importantly; (c) your address and telephone number.

For further information needed on its features, please visit for frequently asked CRAFTSMAN.com

questions and the electronic manual.

Product Service & Support

Customer Assistance

CRAFTSMAN®

is a registered trademark of Stanley Black & Decker, Inc., used under license.

U.S. & Canada Only

Made in CHINA

Product Manufactured by:

Altis Global Limited, Atlanta, GA USA.

For product, service or warranty information contact us at:

CRAFTSMAN.com • 888-331-4569

Trademark Acknowledgment

The current VOX sensitivity level is displayed with

letters “L” and a Number 1 through 5, with Number 5

being the most sensitive level and Number 1 being

the least sensitive level.

If a location has been programmed before, its

associated channel/privacy code will be shown

on the display.

A memory location can be reprogrammed at any

time it is displayed. Press the button to MEM/ESC

begin.

The radio ignores specific privacy codes while

scanning channels.

If a location has been programmed before, its

associated channel/privacy code will be shown on

the display.

If “ ” flashes in place of the privacy code numbers, a privacy code is oF

already set in the opposite (CTCSS or DCS) system. Press the Channel Up

or button to cancel the opposite code and select a privacy Channel Down

code from the active system for the selected channel.

Product specificaties

Merk:	Craftsman
Categorie:	Radio
Model:	CMXZRAZF668

Heb je hulp nodig?

Als je hulp nodig hebt met Craftsman CMXZRAZF668 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Radio Craftsman

Craftsman CMXZRAZF668 Handleiding

31 Mei 2023

Craftsman CMXZRAZW822 Handleiding

21 November 2022

Handleiding Radio

Nieuwste handleidingen voor Radio

Technisat Transit 121 IR Handleiding

25 April 2024

Albrecht DR 866 Handleiding

16 April 2024

Be Cool BC23KR587BT Handleiding

11 April 2024

BLUEPALM BP-587 Handleiding

11 April 2024

BLUEPALM BP-585 Handleiding

11 April 2024

Pure Classic C-D6 Handleiding

8 April 2024

August MB290 Handleiding

6 April 2024

August MB225 Handleiding

6 April 2024

August MB450 Handleiding

6 April 2024

August MB420 Handleiding

6 April 2024