Cotech S105A-P-20W Handleiding

Bekijk gratis de handleiding van Cotech S105A-P-20W (5 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 57 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over Cotech S105A-P-20W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GREAT BRITAIN • CUSTOMER SERVICE

contact number: 08545 300 9799

e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

ENGLISH

Ver. 20131009

20W LED Work Light

Art.no 18-2696 Model S105A-P-20W-UK

36-4846 S105A-P-20W

Please read the entire instruction manual before using the product and save it for future reference.

We reserve the right for any errors in text or images and any necessary changes made to technical data.

If you have any questions regarding technical problems please contact our Customer Services.

Safety

• Read these instructions carefully before using the product.

• Never let children use the product without adult supervision.

• Never look directly into the light; it could damage your eyesight.

• Always unplug the light when it is not in use. Pull the plug, not the lead.

• Protect the work light from dust, water and extreme temperatures. High temperatures can damage the bulb.

• Before use, check that the plug, lead, diffuser and casing are all undamaged. If any damage is detected, do not

use the light until it has been repaired by a qualified technician.

• If the mains lead is damaged, to prevent any risk of fire or electrocution, it must only be replaced by

a qualified electrician.

• Never cover the work light. Never use the work light in the vicinity of explosive gases or liquids.

• The LED cannot be replaced.

• This product must not be dismantled or modified in any way.

• The light must only be used on the supplied stand, it must never be mounted on a wall or ceiling.

• Treat the light carefully.

• The light must only be connected to an earthed electrical socket.

• Before using the light, make sure that the supply voltage corresponds to the light’s rated voltage.

Operation

1. Place the stand on a firm surface where it cannot tip over.

2. Adjust the tilt angle.

3. Plug the light into a wall socket.

Care and maintenance

• Never use strong cleaning agents/solvents to clean the product. Clean the light using a soft cloth.

• Always unplug the light before cleaning it.

Disposal

This product should be disposed of in accordance with local regulations.

If you are unsure how to proceed, contact your local authority.

Specifications

Voltage220–240 V AC, 50 Hz

Input current0.105 A

Power20 W

Power factor0.9

Light source1 LED. The light source is non-replaceable.

Lead1.8 m rubber-clad cable H05RN-F 3×1 mm²

IP classIP54

Class1

Luminous flux1300 lm

Beam angle130°

Tempered glass size175×135×4 mm

Product specificaties