Coast PolySteel 200 Handleiding
Bekijk gratis de handleiding van Coast PolySteel 200 (1 pagina’s), behorend tot de categorie Zaklamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 3.7 sterren uit 1.5 reviews. Heb je een vraag over Coast PolySteel 200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
POLYSTEEL 200 INSTRUCTIONS:
BATTERY INSTALLATION:
Turn the tail cap in a counter clock wise dir ectio n to remove t he cap.
Remove the battery car tridge.
Place three AAA batteries into the cartridge in the direction indicated in
the center of the cartridge.
Replace the cartridge in the light in the direction indicated by the arrow
on the cartridge.
Replace the tail cap and turn it clockwise to tighten it until it is com-
pletely closed.
Note: The POLYSTEEL 200 in clam pack packaging comes with batteries
pre-installed.
QUICK CYCLE SWITCH OPERATION:
This flashlight is equipped with COAST’s Quick-Cycle Switch, featuring
high, medium and low beams.
To activate the high mode from the off position, press the on/off switch
until it clicks once, then releases. Press the on/off switch until it clicks a
second time to turn off the light.
To activate the medium mode, press the on/off switch until it clicks a
third time, then release. Press the on/off switch until it clicks a fourth
time to turn off the light.
To activate the low mode, press the on/off switch until it clicks a fifth
time, then release. Press the on/off switch until it clicks a sixth time
to turn off the light.
The light can also be operated in “momentary” mode. Momentary mode
is activated by partially depressing the on/off switch (less pressure
than required for a full click). The momentary switch will cycle the light
through the high and low beam modes.
Any time the light is turned off for more than five seconds, the high/
medium/low cycle will reset, and the high beam will be activated when
the light is turned back on.
PURE BEAM FOCUSING OPTIC:
This flashlight is equipped with COAST’s Pure Beam Focusing Optic that
allows the user to choose between a broad flood beam and a focused
Bulls-Eye Spot beam for long distance illumination.
To adjust the beam into the Bulls-Eye Spot mode, turn the front bezel
of the light clockwise.
To change the beam into the flood light mode, turn the front bezel of the
light counterclockwise.
MAINTENANCE:
The POLYSTEEL 200 is rated IPX8 and submersible to 3 meters for 6
hours. Wipe the external body with a cloth moistened with water or
isopropyl.
POLYSTEEL 200
16-596v01N 1606A
For warranty and distributor information in
your country, visit: www.COASTportland.com
Product specificaties
| Merk: | Coast |
| Categorie: | Zaklamp |
| Model: | PolySteel 200 |
Heb je hulp nodig?
Als je hulp nodig hebt met Coast PolySteel 200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaklamp Coast
10 April 2025
10 April 2025
10 April 2025
10 April 2025
10 April 2025
10 April 2025
10 April 2025
18 December 2024
17 December 2024
4 Mei 2024
Handleiding Zaklamp
- Craftsman
- Sanyo
- KSE-Lights
- Total
- Hama
- Olight
- FoxFury
- Petzl
- DeWalt
- Kogan
- LED Lenser
- PCE
- Blackburn
- GP
- WAGAN
Nieuwste handleidingen voor Zaklamp
17 Juni 2025
16 Juni 2025
16 Juni 2025
14 Juni 2025
9 Juni 2025
9 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025