Cisco WAP581 Handleiding

Cisco Access point WAP581

Bekijk gratis de handleiding van Cisco WAP581 (13 pagina’s), behorend tot de categorie Access point. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 5.0 sterren uit 5.5 reviews. Heb je een vraag over Cisco WAP581 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/13

Quick Start Guide

Cisco WAP581 Wireless-AC/N Dual Radio

Access Point with 2.5GbE LAN

Cisco WAP581 Wireless Access Point 1

Welcome

Thank you for choosing the Cisco WAP581 Wireless-AC/N Dual Radio

Wave 2 Access Point with 2.5GbE LAN. The Cisco WAP581 is an indoor

dual radio 802.11acWave2 + 802.11acWave1 access point with Power

over Ethernet (PoE). -PoE Supplied by UL Listed I.T.E.

NOTE The unit should be connected to PoE networks only, without routing to

the outside plant.

This guide is designed to familiarize you with the general layout of the

access point, describe how to deploy the device in your network, and

describe how to configure the device. Your access point has more features

and functionality than what is described in this guide. For additional

information, see the Administration Guide. A link to the Administration

Guide is found in Where to Go from Here.

Package Contents

•Wireless Access Point

•Mounting kit

•This Quick Start Guide

•Ethernet cable

•Pointer Card with China RoHS

•Technical Support Contacts

•EU Directives 1999/5/EC Compliance Information (for EU SKU only)

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

•A computer with one of the following browser support:

– Internet Explorer 9.0 or later

– A recent version of either Chrome, Firefox or Safari

•Tools for installing the hardware

•One or more Ethernet network switches with either PoE, PoE injector or

external power adapter

Cisco WAP581 Wireless Access Point 2

Cisco WAP581 Wireless-AC/N Premium

Dual Radio Access Point with PoE Setup

Features

Front Panel

The front panel of the device consists of a single system LED. For a full

description of the colors of the light and its indications, see Verifying the

Hardware Installation.

Back Panel

The back panel of the device has two RJ-45 Ethernet ports. Facing the

back of the device, the right port (labeled “ETH0/PD”) is an 2.5GbE with

802.3at & 802.3af Power over Ethernet (PoE) port which is used to power

your device. The left port (labeled “ETH1”) is a general Gigabit Ethernet

LAN interface. Both are auto-sensing, Gigabit Ethernet (802.3) ports used

to connect your WAP devices to network devices, such as computers,

routers, or switches. We strongly recommend that you use a Category

5e or better cable for Gigabit connectivity.

Side Panel

The side panel of the device consists of the following:

•Kensington Lock Slot—Helps to secure the unit physically using a cable

attached to the device.

•Reset button—See Rebooting the Devices or Returning them to their

Factory Default Settings for information on the Reset button.

Default Setting

If you are using a Cisco RV Series router, the default range for the DHCP

assigned address is from 192.168.1.100 to 192.168.1.254. Any device

connecting to the same LAN will be assigned an IP address in this range.

Parameter Default Value

Username cisco

Password cisco

LAN IP Address DHCP address assigned

by server

Fallback LAN IP 192.168.1.245

Subnetwork Mask 255.255.255.0

Product specificaties

Merk:	Cisco
Categorie:	Access point
Model:	WAP581
Kleur van het product:	Wit
Gewicht:	1360.78 g
Breedte:	228.6 mm
Diepte:	228.6 mm
Hoogte:	38.1 mm
Type stekker:	Type C
Gewicht verpakking:	902.65 g
Breedte verpakking:	316.992 mm
Diepte verpakking:	339.09 mm
Hoogte verpakking:	110.998 mm
LED-indicatoren:	Ja
Plaatsing:	Ceiling, Wall
Montage gereedschap:	Ja
Inclusief besturingssysteem:	Linux
Meegeleverde kabels:	LAN (RJ-45)
Snelstartgids:	Ja
Land van herkomst:	China
Aantal Ethernet LAN (RJ-45)-poorten:	2
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Certificering:	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, FCC 15.247, 15.407, RSS-210, EN 300.328, EN 301.893, AS/NZS 4268.2003, FCC 15.107 + 15.109, ICES-003, EN 301.489-1 + -17
Intern geheugen:	256 MB
Aantal per verpakking:	1 stuk(s)
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,2500 Mbit/s
Netwerkstandaard:	IEEE 802.3af, IEEE 802.3at, IEEE 802.11ac
Ondersteunde beveiligingsalgoritmen:	802.1x RADIUS, HTTPS, SSID, WPA, WPA2
Antennas quantity:	4
Antenne versterkingsniveau (max):	6.23 dBi
Aantal gebruikers:	200 gebruiker(s)
Aanbevolen gebruik:	Binnen
Temperatuur bij opslag:	-20 - 70 °C
Intern:	Nee
Upgraden van firmware mogelijk:	Ja
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	5 - 90 procent
Reset button:	Ja
Flash memory:	128 MB
Maximale overdrachtssnelheid van gegevens:	2800 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Quality of Service (QoS):	Ja
VLAN=ondersteuning:	Ja
Wifi Multimedia (WMM)/(WME):	Ja
Auto Wireless Distribution System (WDS):	Ja
DHCP client:	Ja
Power over Ethernet (PoE):	Ja
Antennefuncties:	Ingebouwde antenne
Automatische kanaalselectie:	Ja
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 Hz
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Code geharmoniseerd systeem (HS):	85176990
Producten per (binnenste) verzendverpakking:	1 stuk(s)
Aantal SSID-ondersteuningen:	33
Gegevensdoorvoersnelheid:	2800 Mbit/s
Ruimtelijke stromen:	3:4x4