Ciclo CP 13 is Handleiding

Ciclo Sporthorloge CP 13 is

Lees hieronder de 📖 handleiding in het Nederlandse voor Ciclo CP 13 is (9 pagina's) in de categorie Sporthorloge. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

22 23

TABLE OF CONTENTS

Page

1. GENERAL INFORMATION . . . . . . . . . . . . . . . . . . 24

2. GETTING GOING . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.1 Putting on the heart rate transmission belt . . 24

3. USING THE BUTTONS . . . . . . . . . . . . . . . . . . . . . 25

4. BASIC SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 Setting time and date . . . . . . . . . . . . . . . . . 25

4.2 Setting alarm . . . . . . . . . . . . . . . . . . . . . . . 27

4.3 Switching heart rate acoustic alarm signal

on/off and calculation of heart rate limit values

with CicloInZone, or inputting by hand . . . . . 28

5. MENU GUIDANCE . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 Date and time . . . . . . . . . . . . . . . . . . . . . . . 31

5.2 Stopwatch mode – Memory function . . . . . . 31

5.3 Memory Mode . . . . . . . . . . . . . . . . . . . . . . 32

5.4 Graphics display . . . . . . . . . . . . . . . . . . . . . 33

5.5 Switching beep sound on/off . . . . . . . . . . . . 33

5.6 Switching beep sound on/off when buttons

are pressed . . . . . . . . . . . . . . . . . . . . . . . . 34

5.7 Illumination . . . . . . . . . . . . . . . . . . . . . . . . . 34

CICLO

nZone®

Philosophy and use . . . . . . . . . . . . . . . . . . . . . . 34

7. CHANGING BATTERIES . . . . . . . . . . . . . . . . . . . . 35

8. CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . 36

9. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . 37

10. CONDITIONS OF WARRANTY . . . . . . . . . . . . . . . 37

11. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . 38

12. WARRANTY CERTIFICATE . . . . . . . . . . . . . . . . . . 39

Congratulations!

You have purchased a high-performance heart rate

monitor which will provide you with extremely important

information for your training routine.

CICLO 13is PULS CP is fitted with state of the art

electronic equipment, is waterproof and you will be

surprised by its long life.

The is also fitted with the brand newCICLO 13is PULS CP

CICLO

nZone® function which, on the basis of the

users personal data and his/her daily fitness, calculates the

ideal heart rate zone for optimum training (see Chap. 6).

We are sure that you will obtain excellent results with

CICLO 13isPULS CP .

Please read these operating instructions carefully.

CONTENTS:

1. Watch with wristband

2. Transmitter belt

3. Adjustable elastic

chest belt

Operating instruction

24 25

Pull the belt tight so that it

cannot slip and constant

contact with the body is

guaranteed during movement.

If the CP 13is fails to display

any heart rate, it probably

means that there is no contact

between the skin and the electrodes. Moistening the elec-

trodes and the underlying skin often helps. Best results are

obtained if electrode gel is used (available from

pharmacies).

3. USING THE BUTTONS

CICLO 13isPULS CP

is fitted with two buttons:

4. BASIC SETTINGS

4.1 Setting time and date

Press the Mode button several

times until the time and date are

displayed.

If the Mode button is pressed and

held for 3 seconds the 12 or 24

hour clock will flash on the display.

If the Set button is then pressed briefly, either the 24 or

12 hour clock may be selected.

If the 12 hour clock is selected, the US calendar format of

month/day will also be automatically selected (European

format: day/month).

1. GENERAL INFORMATION

Sport helps keep the human body young and fit. Whoever

carries out regular sports activities will feel the benefits

first hand - feeling healthier, fitter and able to work hard.

CP 13is is the ideal device for measuring heart rate, and

guiding and monitoring a training routine by setting upper

and lower heart rate values. If the upper or lower heart

rates are exceeded, CP 13is emits an optical and acoustic

warning signal.

Warning: whoever carries out fitness training should have

a general medical check up on his/her general state of

health – especially beginners, persons older than 35 years

of age and anyone who has suffered from illnesses or

injuries in the past. It is recommended that a doctor be

consulted in any case in the presence of risk factors, such

as smoking, high blood pressure, high cholesterol values,

diabetes, lack of exercise and excess weight.

Pacemaker wearers should consult their doctor

before using any heart rate measurement device!

2. GETTING GOING

The following general rules apply:

- Measurement of the heart rate is only possible if the

transmitter belt is fitted correctly and the CP 13is lies

within the transmitter’s reception range (approx. 70 cm).

- Press the Mode button to start the receiver fitted in the

CP CP 13is. If the 13is does not receive any heart rate

signal for more than 5 minutes it automatically switches

off, and remains in standby mode. If the Mode button is

pressed, the CP 13is returns to the normal operation

mode (the heart rate receiver will also start at the same

time).

- A heart-shaped symbol will flash on the display when the

CP 13is receives the heart rate signals from the

transmission belt.

2.1 Putting on the heart rate transmission belt

The transmitter belt is hung in the elastic chest belt and

fastened around the upper body. The transmitter (the plastic

part with the company logo) should lie over the middle of

the upper stomach, immediately below the breastbone, so

that the logo on the transmitter is legible (viewed from the

front) (see illustration). The electrodes in the belt, to the right

and left of the transmitter, must be in contact with the skin.

Electrodes

Transmitter

Mode button

Set button

26 27

4.2 Setting alarm

Press and hold the Set button for 3

seconds when the display shows the

time and date.

“AL” will appear on the display, as

well as the time set for the alarm.

If the Mode button is pressed and

held for 3 seconds the hour will flash

on the display.

Press the Set button to change the value displayed and

store using the Mode button.

The minutes are then set.

Press the Set button to change the value displayed and

store using the Mode button.

Press the Set button, whilst in Alarm

mode, to switch the alarm on or off.

The alarm symbol will appear on the

display.

Store using the Mode button.

Press the Mode button to store the

displayed value. The hour will then

flash on the display.