Chief SMA651 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Chief SMA651 (1 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC. 8820-000005 (Rev. A)
1-800-582-6480 952-894-6280 FAX 952-894-6918 2005 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA 4/05
SMA-651
INSTALLATION ADAPTER KIT
FOR SMART-LIFT 236
The SMA-651 installation adapter kit allows you to attach the Smart-Lift (model SL-236) to threaded rods or
cables for suspended ceiling mounting applications.
Unpack carton and check contents:
(4) Bolt, hex head, 3/8 – 16 x 1” (1) Rear Adapter
(4) Nut, Nylock, 3/8-16 (1) Front Adapter
(8) Washer
CAUTION!!! The overhead support must be capable of supporting five times the
combined weight of the lift and all equipment. If it cannot, it MUST be reinforced.
I I NSTALLATION NSTRUCTIONS
1. Make sure Smart-Lift is fully closed. Remove
bottom panel of Smart-Lift.
2. Insert four 3/18-16 x 1” bolts and washers in holes
in top of Smart-Lift (see Figure).
3. Secure two hanging rod adapters to the Smart-Lift
using four Nylock nuts and washers as shown in
the Figure below.
4. Reinstall bottom panel.
5. See Smart-Lift Installation Instructions.


Product specificaties

Merk: Chief
Categorie: Flat panel steun
Model: SMA651

Heb je hulp nodig?

Als je hulp nodig hebt met Chief SMA651 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Flat panel steun Chief

Handleiding Flat panel steun

Nieuwste handleidingen voor Flat panel steun