Chief RPA218 Handleiding

Chief Flat panel steun RPA218

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief RPA218 (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

RPA Series

LCD/DLP

Ceiling Mount

BEFORE YOU BEGIN

• You must have an SLB (bracket designed for your application) to attach the RPA to your projector.

• The maximum weight to be installed on the RPA ceiling mount is 50 pounds (22.68 Kg).

•CAUTION: To prevent damage to the RPA, which could affect or void the Factory warranty, thoroughly

study all instructions and illustrations before you begin to install the RPA. Pay particular attention to the

“Important Precautions” on Page 1.

• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.

I N S T R U C T I O N M A N U A L

The Chief RPA Series ceiling mounts provide a unique, sim-

plified method of ceiling mounting inverted LCD/DLP pro-

jectors. Chief’s low profile design offers three easy

mounting methods (1 1/2”NPT, flush or threaded rod); roll,

pitch and yaw adjustment; a cable management system;

and custom designed brackets that allow quick projector

disconnect without loss of registration.

All Chief RPA Series ceiling mounts provide access for

quick lamp changes and easy filter cleaning without requir-

ing any disassembly. The mount is constructed of heavy

gauge steel and designed to ensure proper projector venti-

lation.

Fast and precise image registration is achieved through the

easy roll, pitch and yaw adjustments built into the RPA

mounts. Optional projector security is included by using the

All-Points™ Security kit

CHIEF MANUFACTURING INC.

1-800-582-6480 952-894-6280 FAX 952-894-6918

12800 HIGHWAY 13 SOUTH, SUITE 500

SAVAGE, MINNESOTA 55378 USA

PART NO. 8811-000001 (Rev. E)

2000 Chief Manufacturing

www.chiefmfg.com

Printed in USA 09-03

RPA

SLB

Typical Shown

All-Points™ Security Option Included

quick-disconnect thumbnut

Chief’s Exclusive

Instruction Manual RPA

IMPORTANT WARNINGS AND CAUTIONS!

WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the cor-

responding instructions.

•WARNING: Improper installation can result in serious personal injury! Make sure that the ceiling struc-

tural members can support a redundant weight factor five times the total weight of the equipment. If the

ceiling can not support this weight, reinforce the ceiling before installing the RPA.

•CAUTION: Inspect the unit for shipping damage. See “DIMENSIONAL DRAWING” on page 3

TOOLS REQUIRED FOR INSTALLATION

• Allen Wrench (provided)

• Security Allen Wrench (provided)

• Phillips screwdrivers, No. 1 and No. 2

NOTE: Other tools may be required depending on the

method of installation.

CONTENTS

DIMENSIONAL DRAWING ............................. 3

INSPECT THE UNIT BEFORE

INSTALLING ...................................................... 4

PREPARE THE CEILING .................................. 4

General Guidelines ............................................... 4

RPA INSTALLATION PROCEDURES ............. 5

1 1/2” Diameter NPT Threaded Pipe ................... 5

Standard Fasteners Secured to

a Wood Framing Member .................................... 6

Threaded Rod ....................................................... 6

BRACKET ATTACHMENT PROCEDURES ... 7

ALL-POINTS SECURITY .................................. 7

PROJECTOR ALIGMNMENT

INSTRUCTIONS ................................................. 8

Pitch ..................................................................... 8

Roll ....................................................................... 8

Yaw ...................................................................... 8

PARTS ................................................................. 9

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	RPA218
Kleur van het product:	Zwart
Materiaal behuizing:	Metaal
Montagewijze:	Plafond
Maximale gewichtscapaciteit:	22.7 kg
Bereik kantelhoek:	-4 - 4 °