Chief K2P200S Handleiding

Chief Flat panel steun K2P200S

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief K2P200S (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

K2C100

K2W100

K2C200

K2W200

K2P200

K2P100

Monitor Arm Series

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

K2 Series

K2 Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component. The wall to which the mount is being attached

may have a maximum drywall thickness of 5/8" (1.6cm).

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located between the K2 Series Monitor Arm

up to (and including) the display does not exceed 40 lbs

(18.14 kg) for single arm mounts or 25 lbs (11.34 kg) per arm

on dual arm mounts. Use with products heavier than the

maximum weight indicated may result in collapse of the

mount and its accessories causing possible injury.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS!--

Installation Instructions K2 Series

DIMENSIONS

K2C100

3.94

100

2.95

11.41

MAX 21.04 [534.2]

289.7

5.19

131.7

3.00

76.2

CABLE

MANAGEMENT

90 INTERFACE

ROTATION

7.41

(8.85 [224.7] FOR

LOWER PROFILE INSTALL )

188.1

.50

MAX 3.25 [82.6]

12.7

DESKTOP

THICKNESS RANGE

9.63

244.5

MANUAL HEIGHT

ADJUSTMENT RANGE

MAX 19.2 [487.7]

EXTENSION

PITCH

TENSION

KNOB

PITCH

RANGE

HEIGHT

ADJUSTMENT

KNOB

LOWER PROFILE INSTALL

LOWER

PROFILE

3.94

100

2.95

11.47

MAX 21.04 [534.2]

291.3

5.25

133.3

3.00

76.2

CABLE

MANAGEMENT

90 INTERFACE

ROTATION

.50

MAX 3.25 [82.6]

12.7

DESKTOP

THICKNESS RANGE

9.56

242.9

MANUAL HEIGHT

ADJUSTMENT RANGE

MAX 17.4 [450.7]

EXTENSION

MIN 2.98 [75.7]

PITCH

TENSION

KNOB

PITCH

RANGE

HEIGHT

ADJUSTMENT

KNOB

MAXIMUM WIDTH OF 2 PARALLEL, FORWARD-FACING DISPLAYS: 28.8" [731.5]

K2C200

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	K2P200S
Kleur van het product:	Zilver
Breedte:	432 mm
Diepte:	114 mm
Hoogte:	356 mm
Gewicht verpakking:	4023 g
Materiaal behuizing:	Aluminium
Montagewijze:	Muur
Maximale gewichtscapaciteit:	22.6 kg
Telescopisch:	Nee
Op afstand bedienbaar:	Nee
Pivot hoek:	-90 - 90 °
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Aantal displays ondersteund:	2
Verbeterd kabelbeheer:	Ja
Diepte (imperiaal):	4.5 "
Bereik kantelhoek:	-15 - 15 °
Maximale schermgrootte:	30 "
Minimale schermgrootte:	10 "
Aantal draaipunten:	4
Diepte (max):	482.6 mm