Chief DMA2B Handleiding
Pagina's 2 Flat panel steun
Bekijk de handleiding van Chief DMA2B gratis online of download de PDF. 41 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Quick Setup Guide
For complete installation instructions, refer to the
Installation Manual included with this product.
This Quick Setup Guide is meant to provide only an overview
of the various installation steps.
ALWAYS read the Installation Instructions in its entirety before
beginning the Installation.
DMA
DMA
x2
or
x2
desk
Option A
Step 1: Clamp Base to Desk Edge Option
Loosen clamp screw on base, place on desk
and tighten.
Reattach removed piece of clamp and
screws and tighten clamp screw.
8800-003249, Rev0010/2020
Option B
Step 1: Clamp Base through Grommet Hole Option
Remove lower piece of clamp from assembly by removing two
button head cap screws and install remaining part of clamp
through grommet hole.
DMA1 Single Monitor Arm
DMA2 Dual Monitor Arm
Tools Required for Installation
Parts
#2
5/32” (included)
A (1)
[Arm assembly]
(DMA1 shown)
B (1)
[Base assembly]
(DMA1 shown)
F (1)
5/32”
D (4/8)*
M4 x 20mm
E (4/8)*
M10 x 5.3 x 10
C (4/8)*
M4 x 10mm
DISCLAIMER
Legrand | AV and its ailiated corporations and subsidiaries (collectively “Legrand | AV”), intend
to make this manual accurate and complete. However, Legrand | AV makes no claim that the
information contained herein covers all details, conditions or variations, nor does it provide
for every possible contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice or obligation of any
kind. Legrand | AV makes no representation of warranty, expressed or implied, regarding the
information contained herein. Legrand | AV assumes no responsibility for accuracy, completeness
or suiciency of the information contained in this document.
WEIGHT CAPACITY WARNING
Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is
the installer’s responsibility to make sure the combined weight of all components and accessories
attached to the DMA Series Monitor Arm up to (and including) the display is between the weight
ranges listed below. Use with products heavier than the maximum weight indicated may result in
collapse of the mount and its accessories causing possible injury. Use with products lighter than
the minimum weight indicated may result in the mount not functioning properly.
Product specificaties
| Merk: | Chief |
| Categorie: | Flat panel steun |
| Model: | DMA2B |
| Kleur van het product: | Zwart |
| In hoogte verstelbaar: | Ja |
| Montagewijze: | Bureau |
| Maximale gewichtscapaciteit: | 6.8 kg |
| Model: | Landschap/portret |
| Aantal per verpakking: | 1 stuk(s) |
| Gemakkelijk te installeren: | Ja |
| Montage interface compatibiliteit (min): | 75 x 75 mm |
| Montage interface compatibiliteit (max): | 100 x 100 mm |
| Aantal displays ondersteund: | 2 |
| Bereik kantelhoek: | -10 - 65 ° |
| Maximale schermgrootte: | 32 " |
| Code geharmoniseerd systeem (HS): | 85299097 |
| Minimale schermgrootte: | - " |
| Type hoogteverstelling: | Handmatig |
| kantel aanpassingen: | Ja |
| Bureaubladdikte (max): | 63 mm |
| Bureaubladdikte (min): | 13 mm |
Heb je hulp nodig?
Als je hulp nodig hebt met Chief DMA2B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flat panel steun Chief
Chief MSA1U Handleiding Chief LDB1U Handleiding Chief LVSXUP Handleiding Chief LFD1U Handleiding Chief DMA1S Handleiding Chief RMT3 Handleiding Chief LSA1U Handleiding Chief LTA1U Handleiding
Alle Chief Flat panel steun handleidingen
Populair in Flat panel steun
Handleiding Flat panel steun
Nieuwste handleidingen voor Flat panel steun
Techly ICA-LCD 2923 Handleiding Techly ICA-TR53LW Handleiding Techly ICA-PLB 590 Handleiding Techly ICA-LCD 104 Handleiding Vogel's PFW 4710 Handleiding Vogel's RISE 2005 Handleiding Vogel's PFW 1030 Handleiding Vogel's RISE 4200 Handleiding Vogel's RISE 2008 Handleiding B-tech BT7104-4350 Handleiding