CDA KVC35RSS Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor CDA KVC35RSS (3 pagina's) in de categorie Spoelbak. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
www.cda.eu
KVC30 and
KVC35 Stainless
Steel Undermount
Sinks
Installation
2
Installation
Before Installation
Thoroughly check the sink and any fittings for signs of damage
(transport or otherwise).
Please note: After fitting, sinks cannot be returned for credit or
replacement.
Oer up the sink to the worktop and/or the cabinets to confirm that
the external dimensions of the bowls are compatible with the cabinets
themselves.
Confirm that with the sink in position:
• There is adequate space to install any taps or other required
accessories.
• There is adequate space to install the waste pipe work and that any
necessary modifications to internal shelves to accommodate the
waste (and trap) are acceptable.
• Access to any water shut-o or other services will still be adequate
after the installation.
Installation
• Use the template provided to mark out where the worktop needs to
be cut. Double-check the dimensions, and check the template against
the sink, before cutting the worktop aperture.
• After cutting out the worktop aperture, we recommend you seal the
cut edges with silicone (or similar) sealant to help prevent ingress of
water.
• It is often easier to mount the taps to the worktop and the waste-fitting
and overflow onto the sink prior to fitting the sink to the worktop.
• The edges of the sink should be bedded onto a bead of silicone (or
similar) sealant, to create a barrier to the ingress of water and other
3
E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the
right to change specifications without prior notice.
items between sink and
worktop.
• After positioning the sink with the
worktop, fit the threaded inserts
into the underside of the worktop (a
10mm drill bit can be used to make
the holes for the threaded inserts)
and then position the brackets and
fixing screws as shown in Fig. 1. Next,
tighten the screws.
• Do not use a power tool to tighten the screws; use a hand tool
to ensure that they are tightened just enough to clamp down on
the worktop and no more.
• After fixing, ensure the sealant forms a continuous bead to prevent
water ingress.
• Remove any excess sealant using an appropriate method as
recommended by the sealant manufacturer.
• The taps, waste-fitting and overflow can now be mounted onto the
sink (if not already done) and fully connected to their respective
services.
• To check the waste for leaks, close the plug/basket of the waste
fitting, open the tap and fill the sink to the level of the overflow; turn
o the tap and wait several minutes to verify that the water doesn’t
drain away. Finally, empty the sink.
After fitting, ensure that the enclosed “Stainless Steel Sinks Use and
Maintenance” guide is retained for the customer and/or user of the
sink.
Fig. 1
Worktop
Sink
Threaded insert
Fixing screw
Bracket
Product specificaties
| Merk: | CDA |
| Categorie: | Spoelbak |
| Model: | KVC35RSS |
Heb je hulp nodig?
Als je hulp nodig hebt met CDA KVC35RSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Spoelbak CDA
5 Juli 2023
2 Juli 2023
20 Juni 2023
20 Juni 2023
19 Juni 2023
18 Juni 2023
16 Juni 2023
16 Juni 2023
15 Juni 2023
15 Juni 2023
Handleiding Spoelbak
- Spoelbak Bartscher
- Spoelbak Franke
- Spoelbak Leisure
- Spoelbak Rangemaster
- Spoelbak Saro
- Spoelbak Smeg
- Spoelbak Teka
- Spoelbak Concept
- Spoelbak Blanco
- Spoelbak Caple
- Spoelbak Kernau
- Spoelbak Artusi
- Spoelbak Foster
- Spoelbak Nodor
- Spoelbak Elkay
- Spoelbak Gustavsberg
- Spoelbak Schock
- Spoelbak Roca
- Spoelbak Advance Tabco
- Spoelbak Eagle Group
- Spoelbak Sani-Lav
- Spoelbak Laveo
- Spoelbak Deante
- Spoelbak Tot Mate
- Spoelbak Kuchinox
- Spoelbak Oliveri
- Spoelbak Shaws
Nieuwste handleidingen voor Spoelbak
3 April 2024
3 April 2024
3 April 2024
3 April 2024
19 Maart 2024
19 Maart 2024
19 Maart 2024
13 Maart 2024
5 Maart 2024
4 Maart 2024