Casio DBC32-1A Handleiding

Casio Horloge DBC32-1A

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio DBC32-1A (5 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

Operation Guide 2888

MO0407-EA

About This Manual

•Button operations are indicated using the letters shown

in the illustration. Keypad keys are indicated by their

main keycap markings within square brackets in bold,

such as [2].

•Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Keypad

General Guide

•Press B to change from mode to mode.

•In any mode, press to illuminate the display.L

Alarm Mode

Timekeeping Mode

Calculator Mode

▲

Press .B

▲

Data Bank Mode

▲

Stopwatch Mode

Dual Time Mode

Timekeeping

Use the Timekeeping Mode to set the time and date. You

can also view the Dual Time Mode screen or Data Bank

Mode screen from the Timekeeping Mode.

Note

This watch is capable of displaying text for the day of the

week in any one of 13 different languages (English,

Portuguese, Spanish, French, Dutch, Danish, German,

Italian, Swedish, Polish, Romanian, Turkish, and

Russian).

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds digits start to flash. This is the setting screen.

2. Use C B and to move the flashing in the sequence

shown below to select other settings.

Seconds

Year Month–Day

Day of week

Language indicator

PM indicator

Hour : Minutes

•The currently selected language indicator flashes on the display while the

Language setting is selected in the above sequence.

3. When the setting you want to change is flashing, use the keypad to change it as

described below.

•You must input two digits for the hour, minutes, year, month, and day settings. If

you want to specify 3 o clock, for example, input 03 for the hour. For the year’

setting, input the two rightmost digits.

Seconds Year Month Day

Minutes Hour Language

Press . Press C B.

To do this:

Reset the seconds to 00

Change the year, month,

day, hour, or minutes

Change the language

Do this:

Press .[0]

Input values on the keypad keys.

•The flashing moves to the right each time you

input a value.

•While the hour or minutes is flashing (12-hour

timekeeping only), press [=PM] to toggle between

AM (A indicator) and PM (P indicator).

Use [+] and [÷].

•While the language indicator is flashing on the display, use and to cycle[+] [÷]

through the language indicators as shown below until the one for the language

you want to select is displayed.

Indicator Language

ENxEnglish

POR Portuguese

ESP Spanish

FRA French

NED Dutch

Indicator Language

DAN Danish

DEU German

ITA Italian

SVE Swedish

POL Polish

Indicator Language

RO Romanian

T)R Turkish

P CURussian

[+]

[÷]

4. Press A to exit the setting screen.

•The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

•See the Day of the Week List“ ” for information on abbreviations used.

•In addition to the day of the week display, the language setting also affects the type

of characters you can input for the name in the Data Bank Mode.

•Holding down A in the Timekeeping Mode displays the indicator for the currently

selected language. Keeping A depressed for one second changes to the

Timekeeping Mode setting screen (indicated by the flashing seconds digits). If you

accidentally display the setting screen, press A again to exit.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press to toggle between 12-hour timekeeping (indicatedC

by A or P on the display), or 24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range

of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

Holding down C for about two seconds in the

Timekeeping Mode toggles between Daylight Saving Time

(DST displayed) and Standard Time ( not displayed).DST

•Note that pressing C in the Timekeeping Mode also

toggles between 12-hour timekeeping and 24-hour

timekeeping.

•The DST indicator appears on the Timekeeping and

Alarm Mode displays to indicate that Daylight Saving

Time is turned on.

To display the Dual Time screen and Data Bank screen in the Timekeeping Mode

Holding down [÷] in the Timekeeping Mode displays the Dual Time screen. Holding

down [+] displays the record you were viewing when you last used the Data Bank

Mode.

Hold down [÷] Hold down [+]

Dual Time Screen Data Bank Screen

Data Bank

The Data Bank Mode lets you store up to 25 records,

each containing name and telephone number data.

Records are automatically sorted based on the characters

of the name. You can recall records by scrolling through

them on the display.

•The characters you can input for the name depend on the

language you select in the Timekeeping Mode. See “To

set the time and date” for more information. Changing the

language setting does not affect names that are already

stored.

•All of the operations in this section are performed in the

Data Bank Mode, which you enter by pressing B.

•Holding down [=PM] in the Data Bank Mode displays

the number of remaining records.

Remaining number

of records

Name

Telephone number

Creating a New Data Bank record

When creating a new Data Bank record, you can input the name and then the

telephone number, or you can input the telephone number and then the name. Being

able to input the phone number first helps to avoid forgetting a number as you input

the name.

Operation Guide 2888

To input the name and then the phone number of new Data Bank record

1. In the Data Bank Mode, press C to display the new

record screen.

•The new record screen is the one that is blank

(contains no name and telephone number).

•If the new record screen does not appear when you

press C, it means that memory is full. To store

another record, you will first have to delete some of

the records stored in memory.

2. Hold down A until the flashing cursor (_) appears in

the name area of the display. This is the record input

screen.

Name area

Number area

New Record Screen

3. In the name area, use [+] [÷] and to cycle through characters at the cursor

position. The characters cycle in the sequence shown below.

A Z to

(alphabet)

@ to -

(symbol)

0 9 to

(number)

(space)

•The above character sequence is for English input. See Character List“ ” for the

character sequences of other languages.

4. When the character you want is at the cursor position, press to move the cursorC

to the right.

5. Repeat steps 3 and 4 until the name is complete.

•You can input up to eight characters for the name.

6. After you input the name, press C as many times as necessary to move the cursor

to the number area.

•When the cursor is located at the eighth space of the name area, moving the

cursor to the right causes it to jump to the first digit of the number. When the

cursor is at the 15th digit of the number, moving it to the right (by pressing C)

causes it to jump to the first character in the name.

[+]

[÷]

•Pressing moves the cursor the right, while moves it to the left.C B

7. In the number area, use the keypad to input the telephone number.

•Each time you input a digit, the cursor automatically moves to the right.

•The number area initially contains all hyphens. You can leave the hyphens or

replace them with numbers or spaces.

•Use [.SPC] [–] to input a space and to input a hyphen.

•If you make a mistake while inputting numbers, use C and B to move the cursor

to the location of the error and input the correct data.

•You can input up to 15 digits for the number.

8. Press A to store your data and exit the Data Bank record input screen.

•When you press A to store data, the name and number you input flash for about

one second as Data Bank records are sorted. After the sort operation is complete,

the Data Bank record screen appears.

•The name can show only three characters at a time, so longer text scrolls

continuously from right to left. The last character is indicated by the symbol

s after it.

To input the telephone number and then the name of new Data Bank record

1. In the Data Bank Mode, press C to display the new

record screen.

2. Use the keypad to input the telephone number.

•Pressing a number key as the first input in a new Data

Bank record will input the number at the first position

of the number area, and automatically move the

cursor to the next position to the right. Input the rest of

the phone number.

•Use [.SPC] [–] to input a space and to input a

hyphen.

•If you make a mistake while inputting the phone

number, press . This will return to the blank newC

record screen, so you can restart your input.

•If you do not input anything for about two or three minutes, or if you press , theB

watch will exit the input screen and change to the Timekeeping Mode. Anything

you have input up to that point will be cleared.

Name area

Number area

New Record Screen

3. After inputting the telephone number, hold down A until the flashing cursor (_)

appears in the name area of the display. This is the record input screen.

4. Input the name that goes with the number.

•Use [+] and [÷] to cycle through the characters at the cursor position. Use C

and to move the cursor. For details about character input, see steps 3 through 5B

under “To input the name and then the phone number of new Data Bank record”.

5. After inputting the name, press A to store your data and exit the Data Bank record

input screen.

To recall Data Bank records

In the Data Bank Mode, use (+) and [+] [÷] (–) to scroll through Data Bank records

on the display.

•See “Sort Table” for details on how the watch sorts records.

•Pressing [+] while the last Data Bank record is on the display displays the new

record screen.

To edit a Data Bank record

1. In the Data Bank Mode, use [+] [÷] (+) and (–) to scroll through the records and

display the one you want to edit.

2. Hold down A until the flashing cursor appears on the display. This is the record

input screen.

3. Use C B (right) and (left) to move the flashing to the character you want to

change.

4. Use the keypad to change the character.

•For details about character input, see steps 3 (name input) and 7 (number input)

under “To input the name and then the phone number of new Data Bank record”.

5. After making the changes that you want, press A to store them and exit the Data

Bank record input screen.

To delete a Data Bank record

1. In the Data Bank Mode, use [+] [÷] (+) and (–) to scroll through the records and

display the one you want to delete.

2. Hold down A until the flashing cursor appears on the display. This is the record

input screen.

3. Press B and C at the same time to delete the record.

•CLR appears to indicate that the record is being deleted. After the record is

deleted, the cursor appears on the display, ready for input.

4. Input data or press A to return to the Data Bank record screen.

Calculator

You can use the Calculator Mode to perform arithmetic calculations, as well as

currency conversion calculations. You can also use the Calculator Mode to turn the

input tone on and off.

•All of the operations in this section are performed in the Calculator Mode, which you

enter by pressing B.

•Before starting a new calculation or currency conversion operation in the Calculator

Mode, first use C to display one of the screens shown below.

•Arithmetic and currency conversion calculation input and result values can be up to

eight digits for positive values, and seven digits for negative values.

•Exiting the Calculator Mode causes all currently displayed values to be cleared.

Timekeeping

Mode time

Calculator Screen

Value input area

Press .C

▲

Currency Converter Screen

How the CC

C button affects the current screen in the Calculator Mode

•Pressing C while the current screen (arithmetic calculator or currency converter

screen) shows a value other than zero will clear the screen to zero, without changing

to the other screen.

•Pressing C while an E (error) indicator is displayed clears the E (error) indicator,

but does not clear the current calculation to zero.

•Pressing C while the current screen (arithmetic calculator or currency converter

screen) is cleared to zero, will switch to the other screen.

Performing Arithmetic Calculations

You can perform the following types of arithmetic calculations in the Calculator Mode:

addition, subtraction, multiplication, division, arithmetic constants, powers, and

approximate values.

To perform arithmetic calculations

When the calculator screen is displayed in the Calculator

Mode, you can use the keypad to input calculations just as

you do with any standard calculator. See the examples

below for details.

•Be sure to press C to clear the arithmetic calculator

screen to zero before beginning each calculation. If the

screen is already cleared, pressing will switch to theC

currency converter screen.

•While you are inputting a calculation, values are

displayed in the value input area, and operators are

displayed in the operator area of the display.

Operator area

Operator symbol

Value input area

•To perform a constant calculation, input the value you want to use as a constant and

then press one of the arithmetic operator keys twice. This makes the value you input

a constant, which is indicated by the n indicator next to the operator symbol.

•An E (error) indicator will appear whenever the result of a calculation exceeds 8

digits. Press to clear the error indicator. After that, you will be able to continue theC

calculation using an approximate result.

Example

(Basic Calculation)

12.3 + 74 - 90 = -3.7

(12 - 0.5) × 3 ÷ 7

=4.9285714

(Constant Calculation)

10 + 7 = 17

12 + 7 = 19

(2.3)4 = 27.9841

Operation

[1] [2] [.SPC] [3] [+] [7] [4][–] [9] [0]

[=PM]

[1] [2] [–] [.SPC] [5] [××××

×] [3] [÷] [7] [=PM]

[7] [+] [+] [1] [0] [=PM]

[1] [2] [=PM]

[2] [.SPC] [3] [××

××

×] [

××

×] [=PM] [=PM] [=PM]

x3 &

4 9285&14

+K1&

+K19

XK2& 9841

Display

•The following table describes how to correct input errors and how to clear the

calculator after you finish using it.

When you need to do this:

Correct or change the value you are

currently inputting, without deleting the

part of the calculation you have input up

to the current value

Correct or change the arithmetic operator

(+, , , ) you have just input–×÷

Completely clear the calculation you are

inputting

Clear a displayed calculation result

(produced by pressing the [+] [–], ,

[××

××

×], [÷], or [=PM] key) and its

calculation

Perform this key operation:

Press C to clear the displayed value

and return to the 0 display. Next, input

the value you want.

Without pressing C, press the key for

the correct arithmetic operator.

Press C to clear the displayed value

and return to the 0 display. Next, press

C again.

Press C.

Currency Conversion Calculations

You can register a single currency exchange rate for quick and easy conversion to

another currency.

•The default conversion rate is × 0 (multiply the input value by 0). represents the×

multiplication operator and 0 is the exchange rate. Be sure to change the value to

the exchange rate value and the operator (multiplication or division) you want to use.

To change the exchange rate and the operator

1. While the currency converter screen is displayed in the

Calculator Mode, hold down until the exchange rateA

starts to flash on the display. This is the setting screen.

2. Use the keypad to input the exchange rate and the

operator ([××××

×]or [÷]) you want to use.

•To clear the displayed exchange rate to zero, press

3. Press A to exit the setting screen.

Operator symbol

Exchange rate

To check the current exchange rate and operator setting

1. While the currency converter screen is displayed in the Calculator Mode, hold down

A until the exchange rate starts to flash on the display. This is the setting screen.

•The setting screen will also show the current exchange rate and operator setting.

2. Press A to exit the setting screen.

Operation Guide 2888

To perform a currency conversion calculation

1. While the currency converter screen is displayed in the Calculator Mode, use the

keypad to input the value from which you want to convert.

2. Press [=PM] to display the conversion result.

3. Press C to clear the conversion result.

•An E (error) indicator appears on the display when the result of a calculation

exceeds 8 digits. Press C to clear the error indicator.

•Pressing [=PM] while a calculation result is displayed will apply the conversion rate

again to the displayed value.

Turning the Input Tone On and Off

An input tone causes the watch to beep each time you press a button or keypad key.

You can turn off the input tone if you want.

•The input tone on/off setting you select in the Calculator Mode is applied to all other

modes, except the Stopwatch Mode.

•Note that alarms will continue to sound even if the input tone is turned off.

To turn the input tone on and off

While the calculator screen or currency converter screen

is displayed in the Calculator Mode, hold down C for

about two seconds to toggle the input tone on (MUTE

indicator not displayed) and off (MUTE indicator

displayed).

•Holding down C will also switch the Calculator Mode

screen.

•The MUTE indicator is displayed in all modes when the

input tone is turned off.

MUTE indicator

Alarms

You can set up to five independent multi-function alarms

with hour, minutes, month, and day. When an alarm is

turned on, the alarm tone sounds when the alarm time is

reached. One of the alarms can be configured as a

snooze alarm or a one-time alarm, while the other four are

one-time alarms.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

•There are five alarm screens numbered 1 5 through .

The Hourly Time Signal screen is indicated by :00.

•All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing B.

Alarm time

Alarm number

Timekeeping

Mode time Alarm date

Hourly Time Signal Screen

Alarm Screen

Alarm Types

The alarm type is determined by the settings you make, as described below.

•Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

•Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

•1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set, only during the month you set.

•Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at the time you set, on the day you set.

Note

The 12-hour/24-hour format of the alarm time matches the format you select in the

Timekeeping Mode.

To set an alarm time

1. In the Alarm Mode, use [+] and [÷] to scroll through

the alarm screens until the one whose time you want to

set is displayed.

x1 x2 x3

:00 x5 x4

•You can configure alarm as a snooze alarm or a1

one-time alarm. Alarms 2 5 through can be used as

one-time alarms only.

•The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the left

hour setting of the alarm time starts to flash, which

indicates the setting screen.

•This operation automatically turns on the alarm.

Hour : Minutes

Alarm number

AM indicator

Month – Day

Press [+] Press [÷]

3. Use the keypad to input the alarm time and date.

•The flashing automatically advances to the right each time you input a number.

You can also use and to move the flashing between input digits.B C

•To set an alarm that does not use a month and/or day setting, input 00 for each

of the unused settings.

•If you are using 12-hour timekeeping, press [=PM] while the hour or minute

setting is flashing to toggle between AM and PM.

•When setting the alarm time using the 12-hour format, take care to set the time

correctly as am ( indicator) or pm ( indicator).A P

4. Press A to exit the setting screen.

•Note that the month and day setting each appear as 00 on the setting screen when

no month or day is set. On the alarm screen, however, an unset month is shown as

x and an unset day is shown as . See the sample displays under To set anxx “

alarm time”.

To test the alarm

In the Alarm Mode, hold down to sound the alarm.C

•Pressing C also toggles the currently display alarm or the Hourly Time Signal on

and off.

To turn alarms

through

and the Hourly Time Signal on and off

1. In the Alarm Mode, use [+] [÷] and to select a one-

time alarm (alarms 2 5 through ) or the Hourly Time

Signal.

2. Press C to toggle it on and off.

•The current on/off status of alarms 2 5 through is

shown by indicators along the bottom of the displays

(al-2 through al-5). The SIG indicator shows the on (SIG

displayed)/off ( not displayed) status of the HourlySIG

Time Signal.

•The alarm on indicators and Hourly Time Signal on

indicator are displayed in all modes.

•While an alarm is sounding, the applicable alarm on

indicator flashes on the display.

Alarm 2 on

indicator

Alarm 4 on

indicator

Hourly time signal

on indicator

To select the operation of alarm

1. In the Alarm Mode, use [+] and [÷] to select alarm 1.

2. Press C to cycle through the available settings in the

sequence shown below.

Snooze alarm on One-time alarm on

SNZ al-1 al-1

Alarm off

•The SNZ indicator and alarm 1 on indicator (al-1) are

displayed in all modes.

•The SNZ indicator flashes during the 5-minute intervals

between alarms.

•The alarm indicator (al-1 and/or SNZ) flashes while the

alarm is sounding.

SNZ

indicator

Alarm 1 on

indicator

SNZ indicator and alarm 11111 on indicator

Press C.

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

•The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

•The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

•The elapsed time measurement operation continues

even if you exit the Stopwatch Mode.

•Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

•All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing B.

Timekeeping

Mode time

Minutes

1/100 second

Seconds

Hours

To measure times with the stopwatch

Start Stop

➤

Re-start Clear

C➤

Stop

C➤C➤A

Split Time

Start Split

➤

Split release Clear

A➤

Stop

A➤C➤A

(SPL displayed)

Start Split Stop ClearSplit release

First runner

finishes.

Display time of

first runner.

Second runner

finishes. Display time of

second runner.

C➤A➤C➤A➤A

Elapsed Time

Two Finishes

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm tone operation is performed a

total of seven times, every five minutes, until you turn the alarm off or change it to a

one-time alarm.

•Pressing any button or key stops the alarm tone operation.

•Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the alarm

setting screen

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	DBC32-1A
Gewicht:	38 g
Breedte:	35 mm
Diepte:	11 mm
Hoogte:	47.5 mm
LED backlight:	Ja
Type horloge:	Horloge
Mechanismetype:	Elektronisch
Type wijzerplaat horloge:	Lcd-wijzerplaat
Stopwatch:	Ja
Alarm functie:	Ja
Agenda:	Ja
Klokmodus:	12/24 uur
Nauwkeurigheid:	±30 sec/maand
Type kalender:	Overdag
Horlogekast materiaal:	Kunststof
Kleur behuizing:	Zwart
Band materiaal:	Kunststof
Hoofdkleur van band:	Zwart
Hoesvorm:	Rechthoekig
Levensduur batterij/accu:	10 jaar
Ondersteund aantal accu's/batterijen:	1
Type batterij:	CR2025